Back
[00:42:10] <CIA-2> EMC: 03cmorley 07TRUNK * 10emc2/src/emc/usr_intf/stepconf/stepconf.py: Fix small error that borked test-axis-button, add driver info for gecko 540, remove small piece of banished pyvcp example
[05:12:43] <CIA-2> EMC: 03cmorley 07TRUNK * 10emc2/src/hal/classicladder/module_hal.c: Cleanup the code not substantial changes intended
[12:22:39] <alex_joni> morning BigJohnT
[12:24:01] <BigJohnT> hi alex_joni
[12:56:20] <micges> alex_joni: mesa and some io card and some pyvcp panel exceed hal rt memory size area
[12:56:58] <micges> where that size can be changed ?
[13:00:01] <CIA-2> EMC: 03bigjohnt 07TRUNK * 10emc2/docs/src/config/images/ (3 files): update and move images
[13:04:20] <alex_joni> hal rt memory size?
[13:04:28] <alex_joni> how did you discover that?
[13:06:49] <micges> jkasunich talked some time ago about percentage of use of hal memory
[13:07:07] <micges> I've cheched the same way here and was
[13:07:11] <micges> about 70%
[13:07:19] <micges> and I've added mesa
[13:08:11] <micges> hal.newpin("bla bla")
[13:10:22] <micges> to be precise:
[13:10:23] <micges> Traceback (most recent call last):
[13:10:23] <micges> File "/home/x/EMC2/machine2/emc/bin/axis", line 1474, in <module>
[13:10:23] <micges> machine = Machine()
[13:10:23] <micges> File "/home/x/EMC2/machine2/emc/bin/axis", line 1290, in __init__
[13:10:23] <micges> self.General_HalCompInit()
[13:10:25] <micges> File "/home/x/EMC2/machine2/emc/bin/axis", line 1415, in General_HalCompInit
[13:10:27] <micges> self.comp.newpin("z_pos", hal.HAL_FLOAT, hal.HAL_IN)
[13:10:29] <micges> hal.error: Not enough memory
[13:11:44] <micges> I've searched hal_lib and didn't find any define about that memory size
[13:13:04] <BigJohnT> thats all folks
[13:13:12] <BigJohnT> * BigJohnT is off to work
[13:24:32] <jepler> micges: I suspect it's this: hal_priv.h:#define HAL_SIZE 131000
[13:26:37] <micges> jepler: I didn't notice this, its working, many thanks
[13:27:22] <jepler> welcome
[13:47:54] <cradek> hi jeff!
[13:48:24] <skunkworks_> where in the world is jepler?
[13:49:22] <cradek> he's vacationing in elbonia
[13:49:50] <skunkworks_> heh - how is the mud?
[13:58:18] <alex_joni> elbonia?
[14:03:38] <cradek> * cradek laughs at alex's response about /usr/share/doc
[14:10:03] <skunkworks_> alex_joni:
http://en.wikipedia.org/wiki/Elbonia
[16:36:08] <alex_joni> skunkworks_: hmm.. never heard of it, yet it's supposed to be somewhere around here :P
[17:04:23] <skunkworks_> heh :0
[20:03:06] <cradek> skunkworks_: do you know anything about these?
http://lincoln.craigslist.org/tls/1036916147.html
[20:38:16] <skunkworks_> cradek: no experience with them other than we have use that brand before. No issues
[21:15:23] <cradek> wonder if it would be any use for my pcb vacuum table.
[21:41:28] <skunkworks_> the only issue I would worry about is if there is enough volume to keep the board down as the holes are being drilled.
[21:41:46] <seb_kuzminsky> hi BigJohnT
[21:41:56] <BigJohnT> hi seb_kuzminsky
[21:42:22] <cradek> skunkworks_: I agree. I called for the model number and the web says it's configured for pressure, not vacuum, anyway
[21:42:35] <cradek> so forget it. not a good match.
[21:42:40] <BigJohnT> anyone got a 50 pin flat cable they can e-mail me?
[21:42:55] <seb_kuzminsky> i'll check one into the cvs so we can all use it
[21:43:00] <cradek> can I fax it?
[21:43:55] <BigJohnT> yea, that would work cradek then I can cut it out with my Tom Nix pocket knife :)
[21:44:12] <SWPadnos> well, if you have a knife and some tin foil, you can make one
[21:52:56] <BigJohnT> * BigJohnT wanders out to the shop to take apart the oil pump for my tractor
[22:15:45] <skunkworks_> matt!
[22:30:47] <mshaver> Hey!
[23:45:14] <fenn> fenn is now known as fenn_driving