Back
[00:17:27] <SWPadnos> JanisCNC, are you having a particular problem?
[01:12:31] <JanisCNC> hm.. i can't describe it.. my btn01 just won't trigger the I/O port but I connected them in the hal file
[01:13:41] <JanisCNC> i hope i'm not in the wrong channel, but i don't know where to ask...
[01:15:24] <JanisCNC> btw. do you speak german? ^^
[01:16:48] <mozmck> JanisCNC: is the I/O port pin connected to another signal as well?
[01:17:36] <JanisCNC> well.. in the stepconfig i made them "unused"
[01:18:35] <SWPadnos> you need to connect them in your POSTGUI_HALFILE
[01:18:56] <SWPadnos> and no, I don't sepak German (though I can order coffee if I need to :) )
[01:19:39] <JanisCNC> ok ^^
[01:20:02] <JanisCNC> I've connected them in another POSTGUI_HALFILE
[01:20:21] <JanisCNC> i created a second one and put it in the ini
[01:20:53] <JanisCNC> is that possible?
[01:21:20] <SWPadnos> hmmm. I don't know
[01:21:46] <JanisCNC> ok I'll now connect them in the original
[01:23:00] <JanisCNC> i also created an pyvcp xml that will load by default in axis
[01:23:24] <JanisCNC> so the xml has the btn01 (signal?)
[01:25:18] <JanisCNC> to connect them i put this in the hal file:
[01:25:28] <JanisCNC> loadrt hal_parport cfg="0x378 out"
[01:25:30] <JanisCNC> loadusr -Wn ptest pyvcp -c ptest ptest.xml
[01:25:32] <JanisCNC> loadrt threads name1=porttest period1=1000000
[01:25:33] <JanisCNC> addf parport.0.read porttest
[01:25:35] <JanisCNC> addf parport.0.write porttest
[01:25:37] <JanisCNC> net pin01 ptest.btn01 parport.0.pin-01-out ptest.led-01
[01:25:39] <JanisCNC> start
[01:27:22] <JanisCNC> but if I now try to start emc I get an error...
[01:27:46] <SWPadnos> parport is already loaded, I'm sure
[01:28:05] <JanisCNC> ok......
[01:28:38] <SWPadnos> you did mention that you used stepconf, which would have loaded parport for you
[01:28:50] <SWPadnos> incidentally, the #emc channel is a better place for this kind of question
[01:29:01] <JanisCNC> noone there..
[01:29:05] <SWPadnos> this channel is intended for more development-related chat
[01:29:11] <JanisCNC> ok......
[01:29:13] <JanisCNC> sry
[01:29:15] <SWPadnos> sure they are, you just have to ask question
[01:29:17] <SWPadnos> s
[01:29:19] <SWPadnos> no problem
[01:29:22] <JanisCNC> there is someone there... ^^
[01:29:29] <JanisCNC> sry
[01:29:30] <SWPadnos> yeah, like everyone here :)
[01:29:53] <JanisCNC> bye
[17:34:39] <SWPadnos_> SWPadnos_ is now known as SWPadnos
[23:31:21] <CIA-8> EMC: 03bigjohnt 07v2_3_branch * r4607e222fc24 10/docs/src/gcode/main.lyx: Expand the description of M62-65 to include the P word
[23:49:54] <CIA-8> EMC: 03bigjohnt 07master * r12365d28bf7b 10/docs/src/gcode/main.lyx: Expand the description of M62-65 to include the P word.