Back
[00:47:40] <skunkworks_> jepler:
http://pastebin.ca/1916726
[01:04:30] <skunkworks_> skunkworks_ is now known as skunkworks
[02:21:46] <jepler> skunkworks: remind me next week to push it unless you find trouble.
[02:23:40] <skunkworks> jepler: does your axis.py source have a lot more stuff in it?
[02:25:53] <skunkworks> I was using master and your patch would not apply
[02:55:04] <CIA-5> EMC: 03cradek 07master * ra38f7094a05d 10/src/emc/rs274ngc/ (interp_o_word.cc rs274ngc_pre.cc rs274ngc_return.hh): Improve handling for mdi invoking nonexistent sub
[02:55:05] <CIA-5> EMC: 03cradek 07master * r8511f46257f0 10/src/hal/drivers/hal_stg.c: Fix incorrect negative DAC output on STG cards
[02:55:06] <CIA-5> EMC: 03cradek 07master * r81a6dce8410d 10/src/emc/rs274ngc/ (interp_internal.hh interp_o_word.cc rs274ngc_pre.cc): new ini parameter: directory search list for subroutines
[02:55:06] <CIA-5> EMC: 03cradek 07master * r13cb58dc26d0 10/ (6 files in 4 dirs): Merge remote branch 'origin/v2.4_branch'
[02:55:16] <CIA-5> EMC: 03cradek 07master * r99ca8582d14c 10/tcl/bin/emccalib.tcl: clean up debugging print
[02:55:16] <CIA-5> EMC: 03cradek 07master * rc57f2d242e75 10/src/emc/iotask/ioControl.cc: Fix current tool information after reloading table
[05:55:37] <ries_> ries_ is now known as ries
[08:03:22] <Dave911_> Dave911_ is now known as Dave911
[09:29:54] <Dave911_> Dave911_ is now known as Dave911
[15:11:24] <cradek> that was not supposed to be part of the patch
[20:39:03] <jepler> cradek is right, the axis.py change should not be there.
[22:13:27] <CIA-5> EMC: 03cmorley 07master * rd1e483783f81 10/src/hal/user_comps/hal_input.py: add bit pins to absolute routines
[22:25:08] <CIA-5> EMC: 03cmorley 07master * rfa4a7380ad80 10/src/hal/user_comps/hal_input.py: Fix a typo in absolute bit pin routine
[22:30:56] <Dave911> I am putting EMC2 onto a compact flash card and I have been doing some testing .. turns out that I needed to install Ubuntu 10.04 and then do an Update to get rid of an early 10.04 problem that pops up when a boot is interrupted. If you have seen the "Now checking your hard drive for errors message"
[22:30:57] <Dave911> that is a symptom of the problem. I was actually able to make the problem corrupt the Compact Flash card I am using. After doing an OS Update via the update manager, and then installing RTAI and EMC2 via the script file... the problem no longer occurs.. and EMC2 and RTAI still work fine. In general I don't like doing OS updates, as they can introduce problems, but this time it was...
[22:30:59] <Dave911> ...necessary.
[22:32:41] <Dave911> I'm also going to put in the "noatime" switch into the fstab file line also as per the Wiki... I don't see any reason not to do that..??
[22:46:37] <SWPadnos_> if you interrupt the boot process while the "checking the disk for errors" message is on the screen, then you are definitely taking your hard disks life in your hands
[22:46:53] <SWPadnos_> that message is displayed while fsck is running
[22:47:27] <SWPadnos_> you should be able to cancel the disk scan by pressing "ESC", and after that it might be safe to interrupt the boot
[22:47:42] <SWPadnos_> I can't see any major difficulty with noatime
[22:47:55] <SWPadnos_> (you won't be able to tell when files were last accessed ...)
[23:26:11] <cradek> jepler: I scoped both tach signals. aside from one (the real tach?) being more noisy, I can't see any difference
[23:26:43] <cradek> I can't figure out how to get a fast enough change in velocity to really show the time delay
[23:28:06] <cradek> maybe I'll crank the accel and try to capture a short jog
[23:28:47] <cradek> I have it set at 30 now but I think it'll do 100