Back
[00:03:28] -!-
theorbtwo has quit [Ping timeout: 240 seconds]
[00:11:49] -!-
Valen has quit [Quit: Leaving.]
[00:20:43] -!-
sumpfralle has quit [Ping timeout: 252 seconds]
[00:57:32] -!-
LawrenceSeattle has quit [Quit: LawrenceSeattle]
[01:03:04] -!-
toastydeath has quit [Ping timeout: 245 seconds]
[01:05:25] -!-
rob_h has quit [Ping timeout: 248 seconds]
[01:10:48] -!-
eartaker has quit [Changing host]
[01:18:45] eartaker is now known as
Eartaker
[01:23:22] -!-
mhaberler has quit [Quit: mhaberler]
[01:35:29] -!-
Eartaker has quit [Quit: Leaving]
[02:31:28] -!-
sumpfralle1 has quit [Ping timeout: 240 seconds]
[02:34:27] -!-
ursaminor has quit [Quit: Page closed]
[02:42:15] -!-
Roguish has quit [Remote host closed the connection]
[02:45:30] -!-
geo01005 has quit [Ping timeout: 252 seconds]
[02:55:07] <seb_kuzminsky> i'd like another git post-push hook installed on git.linuxcnc.org please
[02:55:31] <seb_kuzminsky> for the hostmot2-firmware repo, pointing at the buildmaster at buildbot.linuxcnc.org:8132
[03:03:25] <cradek> ok, lemme see if I can figure that out
[03:04:13] <seb_kuzminsky> you can probably copy the one from the emc2 git repo
[03:04:20] <seb_kuzminsky> i think it's in .git/hooks or something like that
[03:04:30] <cradek> yep
[03:05:32] <seb_kuzminsky> i'm confused why jt reports the arrows getting replaced. After my commit (2.5.0-pre2-306-gfff5411) they were left alone.
[03:05:36] <cradek> ok, 8132 instead of 5133
[03:05:42] <seb_kuzminsky> yes
[03:05:47] <seb_kuzminsky> 8-13-2 == hm2
[03:05:52] <seb_kuzminsky> ;-)
[03:06:00] <cradek> ok, chances are good that it's done
[03:06:04] <seb_kuzminsky> ooh~
[03:06:09] <seb_kuzminsky> s/~/!/
[03:06:41] <seb_kuzminsky> thank you :-)
[03:06:50] <seb_kuzminsky> http://buildbot.linuxcnc.org/hm2-buildbot/waterfall
[03:07:00] <seb_kuzminsky> nearly usable
[03:07:39] <seb_kuzminsky> the only reason it's so green is i haven't taught it to grep the warnings out of the xilinx tools ;-)
[03:18:00] -!-
skunkworks_ has quit [Read error: Operation timed out]
[03:18:27] -!-
clytle374 has quit [Ping timeout: 248 seconds]
[03:18:56] -!-
emc2-buildmaster has quit [Quit: buildmaster reconfigured: bot disconnecting]
[03:19:09] -!-
emc2-buildmaster [
[email protected]] has joined #emc-devel
[03:19:31] -!-
hm2-buildmaster has quit [Quit: buildmaster reconfigured: bot disconnecting]
[03:19:42] -!-
hm2-buildmaster [
[email protected]] has joined #emc-devel
[03:20:28] -!-
hm2-buildmaster has quit [Client Quit]
[03:20:34] -!-
hm2-buildmaster [
[email protected]] has joined #emc-devel
[03:24:44] <seb_kuzminsky> cradek: that hook worked, thanks :-)
[03:24:59] -!-
hm2-buildmaster has quit [Client Quit]
[03:25:44] <cradek> yay!
[03:25:57] -!-
hm2-buildmaster [
[email protected]] has joined #emc-devel
[03:32:06] -!-
Eartaker has quit [Remote host closed the connection]
[03:44:26] -!-
Jim_ has quit [Quit: Leaving]
[03:49:49] -!-
Eartaker has quit [Client Quit]
[03:55:42] -!-
ve7it has quit [Remote host closed the connection]
[03:57:01] -!-
ve7it [
[email protected]] has joined #emc-devel
[04:05:56] -!-
n2diy has quit [Ping timeout: 240 seconds]
[04:06:37] <seb_kuzminsky> ok, the arrows *did* get un-replaced in pre2.306, look at section 9.1:
http://buildbot.linuxcnc.org/doc/v2.5_branch/v2.5.0-pre2-306-gfff5411/pdf/EMC2_Getting_Started.pdf
[04:07:52] -!-
ve7it has quit [Remote host closed the connection]
[04:18:10] -!-
hm2-buildmaster has quit [Quit: buildmaster reconfigured: bot disconnecting]
[04:18:15] -!-
hm2-buildmaster [
[email protected]] has joined #emc-devel
[04:31:55] -!-
Eartaker has quit [Changing host]
[04:33:07] -!-
stormlight has quit [Quit: stormlight]
[04:45:07] -!-
geo01005 has quit [Ping timeout: 244 seconds]
[04:53:12] -!-
stormlight has quit [Quit: stormlight]
[04:59:09] <Ekkeri> any idea when v2.5 will be released?
[05:02:11] <Ekkeri> I have 7I52 (which will hopefully be 7I52S in next week) so I kinda need it, I guess.. just wondering if I go for the beta
[05:02:27] -!-
psha[work] [psha[work]
[email protected]] has joined #emc-devel
[05:03:35] <Ekkeri> just asking if it's days, or weeks, or months.. :)
[05:11:03] -!-
Eartaker has quit [Quit: Leaving]
[05:23:15] -!-
factor has quit [Read error: Connection reset by peer]
[05:36:17] -!-
clytle374 has quit [Quit: Leaving]
[05:36:40] -!-
Zanerkin has quit [Client Quit]
[06:08:53] -!-
geo01005 has quit [Ping timeout: 248 seconds]
[06:25:18] -!-
stormlight has quit [Quit: stormlight]
[06:25:59] -!-
Eartaker has quit [Changing host]
[06:50:25] -!-
clytle374 has quit [Quit: Leaving]
[07:02:22] -!-
mhaberler [
[email protected]] has joined #emc-devel
[07:22:45] -!-
mhaberler has quit [Quit: mhaberler]
[07:24:47] -!-
Eartaker has quit [Quit: By the time you read this I'll already be gone....]
[07:38:10] -!-
mhaberler [
[email protected]] has joined #emc-devel
[07:54:23] -!-
hm2-buildmaster has quit [Quit: buildmaster reconfigured: bot disconnecting]
[07:54:28] -!-
hm2-buildmaster [
[email protected]] has joined #emc-devel
[07:58:16] -!-
MarkusBec has quit [Ping timeout: 255 seconds]
[07:58:44] -!-
mhaberler has quit [Quit: mhaberler]
[08:02:16] -!-
Eartaker has quit [Quit: Leaving]
[08:29:02] -!-
Ear has quit [Quit: leaving]
[08:38:40] -!-
mhaberler [
[email protected]] has joined #emc-devel
[08:45:35] -!-
LawrenceSeattle has quit [*.net *.split]
[08:45:35] -!-
realmatt has quit [*.net *.split]
[08:45:36] -!-
crib has quit [*.net *.split]
[08:45:36] -!-
dvdm_ has quit [*.net *.split]
[08:45:36] -!-
ds3 has quit [*.net *.split]
[08:47:03] <seb_kuzminsky> logger[mah]:
[08:47:03] <logger[mah]> seb_kuzminsky: Log stored at
http://emc.mah.priv.at/irc/%23emc-devel/2011-12-29.html
[08:49:36] <seb_kuzminsky> JT-Shop, jthornton: i'm unable to see the arrow bug you told me about
[08:52:02] <seb_kuzminsky> every "->" i see (in 2.5, before your commit 22664521 "Docs: escape -> so it prints as typed") stays unmolested, nothing gets converted to the unicode arrow character
[08:53:26] <seb_kuzminsky> oh wait, are you talking about the html docs? I was looking at the pdf docs
[08:55:35] <seb_kuzminsky> in pdf, things worked fine after my commit fff541 'docs: teach asciidoc not to replace "<=" and similar with UTF arrows'
[08:56:35] <seb_kuzminsky> in html it looks like it's still getting replaced...
[08:56:36] <seb_kuzminsky> doh
[08:56:40] -!-
Ear has quit [Quit: leaving]
[08:56:57] -!-
Ear has quit [Changing host]
[09:01:05] Ear is now known as
Eartaker
[09:01:45] -!-
Eartaker has quit [Quit: leaving]
[09:03:37] <seb_kuzminsky> i'm like the Greek Orthodox and asciidoc and our docs build system is like the Armenians:
http://www.bbc.co.uk/news/world-middle-east-16347418
[09:06:28] -!-
e-ndy [
[email protected]] has joined #emc-devel
[09:15:44] <Ekkeri> seb_kuzminsky, those "links" are a bit funny like in "3.3 EMC2 Wiki"
[09:16:29] <seb_kuzminsky> which document are you looking at?
[09:16:54] <Ekkeri> that
http://buildbot.linuxcnc.org/doc/v2.5_branch/v2.5.0-pre2-306-gfff5411/pdf/EMC2_Getting_Started.pdf
[09:18:31] <Ekkeri> and that "getting help" is missing from html-version?
[09:18:49] <seb_kuzminsky> oh yeah, the url does look messed up, and not go to the right place
[09:19:11] <Ekkeri> yep
[09:20:28] <Ekkeri> same with the mailing list link it the same page
[09:20:29] <seb_kuzminsky> it's broken in the html too,
[09:20:32] <seb_kuzminsky> yeah
[09:20:48] <seb_kuzminsky> and it's broken at the tip of 2.5 as well, not just in that fairly old version
[09:21:59] <seb_kuzminsky> the link after that, to the linuxcnc.org home page, does work fine
[09:27:38] <seb_kuzminsky> also the link to the embedded irc client, just above that, is 404
[09:34:58] <seb_kuzminsky> the french docs suggest a different irc client than the other language docs...
[09:36:04] <seb_kuzminsky> http://buildbot.linuxcnc.org/doc/v2.5_branch/v2.5.0-pre2-495-g03e129d/html/common/Getting_EMC_fr.html#_les_salons_irc
[09:36:06] <seb_kuzminsky> -vs-
[09:36:08] <seb_kuzminsky> http://buildbot.linuxcnc.org/doc/v2.5_branch/v2.5.0-pre2-495-g03e129d/html/common/Getting_EMC.html#_irc
[09:40:37] <CIA-10> EMC: 03seb 07v2.5_branch * rc5b57444db1b 10/docs/src/common/ (4 files): docs: fix some web links
[09:40:39] <CIA-10> EMC: 03seb 07v2.5_branch * rdab86f32749f 10/docs/src/Submakefile: docs: dont replace -> et al with utf chars in html
[09:40:54] <seb_kuzminsky> Ekkeri: thanks for pointing out those broken links, should be fixed now
[09:41:41] <seb_kuzminsky> and jthornton, the Submakefile commit i just pushed should fix the html so arrows don't get replaced
[09:42:26] <Ekkeri> seb_kuzminsky, that
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl,wiki.linuxcnc.org doesn't work yet
[09:42:53] <seb_kuzminsky> it needs to build first, it'll take about a half hour
[09:42:59] <Ekkeri> should be
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl and it points to beginning of the page
[09:43:08] <Ekkeri> ah.. :)
[09:43:50] <seb_kuzminsky> v2.5.0-pre2-497-gc5b5744 will have the fix
[09:44:46] <seb_kuzminsky> i'm off to bed, see you around! if you find any other bugs, please report them here or on the mailing list! :-)
[09:45:42] <Ekkeri> seb_kuzminsky, ok, I think I will need those docs a lot :)
[09:53:07] -!-
jkastner_ [
[email protected]] has joined #emc-devel
[09:53:21] -!-
e-ndy has quit [Quit: Ex-Chat]
[09:54:30] -!-
jkastner_ has quit [Remote host closed the connection]
[09:58:23] -!-
e-ndy [
[email protected]] has joined #emc-devel
[09:59:40] -!-
CmdrData has quit [Ping timeout: 268 seconds]
[10:01:53] -!-
Eartaker has quit [Quit: leaving]
[10:03:04] -!-
rob_h [
[email protected]] has joined #emc-devel
[10:19:44] -!-
mhaberler has quit [Quit: mhaberler]
[10:25:26] -!-
mhaberler [
[email protected]] has joined #emc-devel
[10:37:19] -!-
LawrenceSeattle has quit [Quit: LawrenceSeattle]
[10:47:56] -!-
Valen has quit [Quit: Leaving.]
[11:06:10] <CIA-10> EMC: 03jthornton 07v2.5_branch * r30a2719a7cc3 10/tcl/ngcgui.tcl: ngcgui: bugfix
[11:24:51] -!-
cncbasher [cncbasher!~quassel@cpc15-hart9-2-0-cust101.11-3.cable.virginmedia.com] has joined #emc-devel
[11:31:58] <CIA-10> EMC: 03jthornton 07v2.5_branch * r61c2191887de 10/docs/src/gcode/gcode.txt: Docs: add example code
[11:43:11] <CIA-10> EMC: 03tissf 07v2.5_branch * r23c4b93aa56d 10/docs/src/examples/spindle_fr.txt: French docs - better markup
[11:43:12] <CIA-10> EMC: 03tissf 07v2.5_branch * r0d7f778f8632 10/docs/src/examples/ (gcode_fr.txt gs2_example_fr.txt misc_fr.txt spindle_fr.txt): French docs - better markup
[11:43:13] <CIA-10> EMC: 03tissf 07v2.5_branch * r45fad95fa1b0 10/docs/ (13 files in 5 dirs): French docs - splitting gcode_fr
[11:46:18] -!-
tissf [tissf!5a135f3f@gateway/web/freenode/ip.90.19.95.63] has joined #emc-devel
[11:51:49] -!-
Loetmichel has quit [Ping timeout: 255 seconds]
[12:03:13] <CIA-10> EMC: 03jthornton 07v2.5_branch * rcc4349cb22cd 10/docs/ (html/gcode.html src/gcode/gcode.txt): Docs: add example code
[12:32:54] -!-
cncbasher [cncbasher!~quassel@cpc15-hart9-2-0-cust101.11-3.cable.virginmedia.com] has parted #emc-devel
[12:57:48] -!-
Tom_L has quit [Client Quit]
[13:01:29] -!-
psha[work] has quit [Quit: Lost terminal]
[13:47:05] <CIA-10> EMC: 03jthornton 07v2.5_branch * rb69fc0908954 10/docs/ (html/gcode.html src/gcode/gcode.txt): Docs: add g code examples
[14:12:02] -!-
realmatt has quit [Read error: Connection reset by peer]
[14:30:52] -!-
geo01005 has quit [Ping timeout: 252 seconds]
[14:49:41] -!-
psha [
[email protected]] has joined #emc-devel
[14:59:34] -!-
mhaberler has quit [Quit: mhaberler]
[15:04:49] -!-
mhaberler [
[email protected]] has joined #emc-devel
[16:17:46] -!-
tlab has quit [Quit: Leaving]
[16:28:36] -!-
elmo40 has quit [Ping timeout: 240 seconds]
[16:36:28] -!-
tlab has quit [Quit: Leaving]
[16:37:15] -!-
acemi has quit [Quit: WeeChat 0.3.2]
[16:37:33] -!-
realmatt has quit [Read error: Connection reset by peer]
[16:38:20] -!-
tlab has quit [Read error: Connection reset by peer]
[16:39:54] <CIA-10> EMC: 03jthornton 07v2.5_branch * ra0bd5a828ea0 10/docs/ (4 files in 2 dirs): Docs: add g code examples
[16:51:33] -!-
automata has quit [Ping timeout: 244 seconds]
[17:15:02] -!-
geo01005 has quit [Ping timeout: 268 seconds]
[17:15:26] -!-
IchGucksLive has quit [Quit: ChatZilla 0.9.87 [Firefox 8.0/20111115192257]]
[17:18:57] -!-
tris has quit [Ping timeout: 252 seconds]
[17:43:34] -!-
factor has quit [Read error: Connection reset by peer]
[18:03:42] -!-
ve7it [
[email protected]] has joined #emc-devel
[18:09:56] -!-
factor has quit [Ping timeout: 252 seconds]
[18:16:00] -!-
adb [
[email protected]] has joined #emc-devel
[18:16:09] -!-
mhaberler has quit [Ping timeout: 252 seconds]
[18:18:21] -!-
sumpfralle has quit [Ping timeout: 252 seconds]
[18:22:33] <CIA-10> EMC: 03jthornton 07v2.5_branch * r50c049b60c02 10/docs/src/gcode/gcode.txt: Docs: add g code examples
[18:22:33] <CIA-10> EMC: 03jthornton 07v2.5_branch * r472ca4eddd17 10/docs/src/gcode/ (6 files): Docs: fix links
[18:22:34] <CIA-10> EMC: 03jthornton 07v2.5_branch * r2512ec1afd77 10/docs/src/hal/ (4 files): Docs: fix bad source highlighting tag
[18:24:50] -!-
mhaberler [
[email protected]] has joined #emc-devel
[18:37:09] -!-
skunkKandT [
[email protected]] has joined #emc-devel
[18:37:36] -!-
geo01005 has quit [Ping timeout: 240 seconds]
[18:39:09] -!-
CmdrData has quit [Ping timeout: 240 seconds]
[19:05:17] -!-
theorb has quit [Ping timeout: 252 seconds]
[19:07:49] -!-
packrat has quit [*.net *.split]
[19:19:36] -!-
syyl has quit [Ping timeout: 268 seconds]
[19:30:09] -!-
geo01005 has quit [Ping timeout: 240 seconds]
[19:37:38] -!-
theorbtwo has quit [Ping timeout: 240 seconds]
[19:39:57] -!-
cjdavis has quit [Quit: Leaving.]
[19:40:29] -!-
tissf has quit [Quit: Page closed]
[19:42:46] -!-
tlab has quit [Read error: Connection reset by peer]
[19:57:01] -!-
cjdavis has quit [Quit: Leaving.]
[19:59:11] -!-
cjdavis has quit [Client Quit]
[20:32:27] -!-
cjdavis has quit [Quit: Leaving.]
[20:32:28] -!-
psha has quit [Read error: Connection reset by peer]
[20:33:21] -!-
psha [
[email protected]] has joined #emc-devel
[20:46:25] -!-
owhite [
[email protected]] has joined #emc-devel
[20:47:25] <owhite> would anyone be willing to look at my .hal file?
http://pastebin.ca/2097258 I'm trying to scale the value on a pin and scale.0.out keep reading as zero.
[20:47:36] <owhite> keeps, that is.
[20:47:40] -!-
geo01005 has quit [Ping timeout: 244 seconds]
[20:47:56] -!-
isssy has quit [Quit: Bye Bye]
[20:48:30] <owhite> the hal file is launched with halrun.
[20:48:34] -!-
e-ndy has quit [Quit: Ex-Chat]
[20:54:46] <skunkKandT> what is the output of halshow?
[20:55:21] <owhite> well in halmeter it tells me scale.0.out is zero.
[20:57:05] <skunkKandT> open up another terminal and type halcmd -kf
[20:57:09] <skunkKandT> than do a halshow
[20:57:19] <skunkKandT> sorry a show
[20:58:51] <owhite> bleh. "Unknown command halshow"
[20:59:07] <owhite> which probably does not make sense.
[20:59:09] <skunkKandT> sorry a show
[21:01:07] -!-
realmatt has quit [Read error: Connection reset by peer]
[21:01:30] <skunkKandT> just 'show'
[21:01:44] <owhite> hang on...
[21:02:29] <owhite> http://pastebin.ca/2097260
[21:03:11] <skunkKandT> 99733 YES servo-thread ( 0, 0 )
[21:03:35] <skunkKandT> seems the servo thread isn't acutally running. (in my opinion)
[21:03:41] <owhite> yes.
[21:04:10] <owhite> trying to figure out how to launch it properly.
[21:06:02] <skunkKandT> I think you need a 'start' in your file
[21:06:25] <owhite> sorry, where?
[21:06:48] <skunkKandT> using this as an example..
http://linuxcnc.org/docs/2.4/html/hal_hal-examples.html#r1_3
[21:08:07] -!-
maximilian_h [
[email protected]] has joined #emc-devel
[21:10:23] <skunkKandT> owhite: did that work?
[21:10:30] <owhite> thank you. that worked. This is launched as a "stand-alone" as in > halrun file.hal
[21:10:57] <owhite> do you think that if it is launched when I start up axis I will still need the start?
[21:11:13] -!-
psha has quit [Ping timeout: 268 seconds]
[21:11:16] <skunkKandT> I don;t think so
[21:11:44] <owhite> ok. Well thanks very much for your help.
[21:12:13] <skunkKandT> no problem
[21:12:37] <owhite> EMC2 continues to please. :-)
[21:12:45] -!-
owhite [
[email protected]] has parted #emc-devel
[21:14:00] <skunkKandT> great!
[21:14:34] <skunkKandT> same here
[21:53:37] -!-
Eartaker has quit [Read error: Connection reset by peer]
[21:58:24] -!-
rob__H [
[email protected]] has joined #emc-devel
[22:00:36] -!-
pcw_home has quit [Ping timeout: 240 seconds]
[22:00:44] pcw_home_ is now known as
pcw_home
[22:01:16] -!-
syyl_ has quit [Ping timeout: 240 seconds]
[22:01:16] -!-
rob_h has quit [Ping timeout: 240 seconds]
[22:10:07] -!-
syyl__ has quit [Quit: Leaving]
[22:31:45] -!-
andypugh [andypugh!~andy2@cpc2-basl1-0-0-cust492.basl.cable.virginmedia.com] has joined #emc-devel
[22:33:51] -!-
H264 has quit [Ping timeout: 268 seconds]
[22:38:19] -!-
acemi has quit [Quit: WeeChat 0.3.2]
[22:53:11] -!-
Fox_Muldr has quit [Ping timeout: 252 seconds]
[23:04:45] <CIA-10> EMC: 03micges 07joints_axes3 * r7e3780b7408a 10/src/emc/ (5 files in 4 dirs): Add axes teleop velocities to motion status to be used by gui
[23:08:32] -!-
maximilian_h has quit [Quit: Leaving.]
[23:09:04] -!-
mhaberler has quit [Quit: mhaberler]
[23:10:11] -!-
Valen has quit [Quit: Leaving.]
[23:10:35] -!-
rooks has quit [Quit: Ex-Chat]
[23:21:27] -!-
Mjolinor has quit [Quit: Leaving]
[23:33:19] -!-
realmatt has quit [Read error: Connection reset by peer]
[23:36:10] -!-
jt-plasma [
[email protected]] has joined #emc-devel
[23:39:16] -!-
jt-plasma has quit [Client Quit]
[23:50:14] -!-
servos4ever has quit [Quit: ChatZilla 0.9.85 [SeaMonkey 2.0.11/20101206162726]]