Back
[00:00:18] -!-
rob_h has quit [Ping timeout: 245 seconds]
[00:00:46] <andypugh> No, I am using a realtime build
[00:07:42] <andypugh> Well, I did apt-get check and the two linuxcnc entries disappeared
[00:08:38] <andypugh> This is a fresh liveCD install. I have installed git and cloned master.
[00:09:52] <andypugh> but configure is failing due to a lack of boost::python, and I was hoping that the dev package would save me the bother of figuring out which of the myriad boost libraries I wanted.
[00:11:54] <andypugh> Maybe I am misremembering that apt knows about linuxcnc?
[00:12:34] <cradek> what's your sources.list say about linuxcnc?
[00:14:07] <andypugh> lucid base 2.4
[00:14:11] <andypugh> Hmm!
[00:14:21] <cradek> bonk
[00:14:39] <cradek> deb
http://linuxcnc.org lucid linuxcnc2.5
[00:14:50] <andypugh> I can only assume that installing emc2-dev did more harm than good :-)
[00:15:06] <cradek> it'll also update fine
[00:27:04] <andypugh> I thought I had it, bit no
[00:27:27] <andypugh> linuxcnc-dev installed, but still no boost::python
[00:35:57] <andypugh> Grr! So it't not in libboost-dev
[00:36:53] <andypugh> (trying libboost-all-dev, but would prefere not to with an 8GB drive)
[00:37:25] <andypugh> At last!
[00:37:44] <andypugh> Goodnight all
[00:37:51] -!-
andypugh has quit [Quit: andypugh]
[00:43:55] -!-
asdfasd has quit [Ping timeout: 244 seconds]
[01:01:17] -!-
Guthur has quit [Ping timeout: 245 seconds]
[01:32:36] -!-
dimas_ has quit [Read error: Connection reset by peer]
[01:54:34] -!-
ve7it [
[email protected]] has joined #linuxcnc-devel
[02:10:34] -!-
toastyde2th has quit [Ping timeout: 245 seconds]
[02:18:57] -!-
i_tarzan has quit [Read error: Operation timed out]
[02:19:33] -!-
SadMan has quit [Ping timeout: 248 seconds]
[02:22:57] -!-
SadMan [
[email protected]] has joined #linuxcnc-devel
[02:59:35] -!-
joe9 has quit [Quit: leaving]
[03:10:00] -!-
i_tarzan_ has quit [Ping timeout: 265 seconds]
[03:35:39] -!-
ve7it has quit [Remote host closed the connection]
[03:54:55] -!-
KimK has quit [Ping timeout: 260 seconds]
[04:08:13] -!-
KimK [KimK!~Kim__@2001:470:1f0f:1042:4261:86ff:fe43:bcad] has joined #linuxcnc-devel
[04:43:39] -!-
mozmck has quit [Quit: Leaving.]
[05:03:35] -!-
Fox_Muldr has quit [Ping timeout: 265 seconds]
[06:01:52] -!-
vladimirek has quit [Remote host closed the connection]
[06:07:28] -!-
iwoj has quit [Quit: Computer has gone to sleep.]
[06:17:47] -!-
elmo401 has quit [Ping timeout: 256 seconds]
[06:24:41] -!-
psha [
[email protected]] has joined #linuxcnc-devel
[06:31:21] -!-
micges [
[email protected]] has joined #linuxcnc-devel
[06:42:44] -!-
axxlq1 [
[email protected]] has joined #linuxcnc-devel
[06:45:48] -!-
Keknom has quit [Quit: Leaving.]
[07:18:50] -!-
skunkworks has quit [Ping timeout: 246 seconds]
[07:19:27] -!-
skunkworks [
[email protected]] has joined #linuxcnc-devel
[07:45:29] -!-
jd896 has quit [Remote host closed the connection]
[07:57:16] -!-
rob_h [
[email protected]] has joined #linuxcnc-devel
[08:17:07] -!-
WillenCMD has quit [Ping timeout: 245 seconds]
[08:22:36] -!-
jd896 has quit [Ping timeout: 244 seconds]
[08:24:08] -!-
elmo40 has quit [Ping timeout: 240 seconds]
[08:24:47] -!-
dimas has quit [Ping timeout: 244 seconds]
[09:06:43] -!-
KimK has quit [Ping timeout: 245 seconds]
[09:26:21] -!-
KimK [
[email protected]] has joined #linuxcnc-devel
[09:52:29] -!-
axxlq1 has quit [Quit: Leaving.]
[10:12:46] -!-
sendoushi has quit [Client Quit]
[10:13:07] sendoush_ is now known as
sendoushi
[10:13:09] -!-
skunkworks has quit [Ping timeout: 252 seconds]
[10:13:16] -!-
mhaberler [
[email protected]] has joined #linuxcnc-devel
[10:35:43] -!-
jthornton [
[email protected]] has joined #linuxcnc-devel
[10:47:57] -!-
archivist has quit [Read error: Operation timed out]
[10:49:05] -!-
the_wench has quit [Ping timeout: 260 seconds]
[11:00:42] -!-
morfic has quit [Read error: Connection reset by peer]
[11:35:25] -!-
erasmo [
[email protected]] has joined #linuxcnc-devel
[11:41:07] -!-
mk0 has quit [Ping timeout: 244 seconds]
[12:23:10] -!-
mung [
[email protected]] has joined #linuxcnc-devel
[12:33:42] -!-
joe9 [
[email protected]] has joined #linuxcnc-devel
[12:44:16] -!-
skunkworks [
[email protected]] has joined #linuxcnc-devel
[12:53:10] <mung> anyone know if there have been changes to linuxcnc.org logins??
[12:53:46] <mung> its been a year since I last login but seems I cannot login today?
[12:56:13] -!-
mozmck [mozmck!~moses@client-74.117.92.175.dfwtx.partnershipbroadband.com] has joined #linuxcnc-devel
[12:58:37] -!-
mhaberler has quit [Quit: mhaberler]
[12:59:33] -!-
mung has quit [Ping timeout: 248 seconds]
[13:06:59] -!-
kawy has quit [Quit: Leaving]
[13:23:40] -!-
mung [
[email protected]] has joined #linuxcnc-devel
[13:24:42] -!-
erasmo has quit [Remote host closed the connection]
[13:48:26] -!-
i_tarzan has quit [Read error: Operation timed out]
[13:51:49] -!-
dimas has quit [Ping timeout: 248 seconds]
[14:02:14] -!-
psha has quit [Read error: No route to host]
[14:02:41] -!-
psha [
[email protected]] has joined #linuxcnc-devel
[14:23:38] <alex_joni> mung: shouldn't be.. but you should be able to request a new password
[14:24:57] <jthornton> alex_joni, I could not even find his old account
[14:25:22] -!-
Thetawaves has quit [Quit: This computer has gone to sleep]
[14:39:12] <alex_joni> jthornton: might be a reason why he can't logon ;)
[14:39:23] <alex_joni> anyways, enough for today.. running home ;)
[14:39:33] <alex_joni> (enough work I mean)
[14:51:11] -!-
The_Ball has quit [Ping timeout: 256 seconds]
[15:00:07] <JT-Shop> ok
[15:00:53] -!-
KimK has quit [Read error: Connection reset by peer]
[15:04:17] -!-
mung has quit [Remote host closed the connection]
[15:04:19] -!-
Valen has quit [Quit: Leaving.]
[15:10:47] -!-
adb [
[email protected]] has joined #linuxcnc-devel
[15:13:24] JT-Shop is now known as
isuckattrig
[15:31:20] -!-
BenceKovi [
[email protected]] has joined #linuxcnc-devel
[15:45:49] isuckattrig is now known as
JT-Shop
[16:09:38] -!-
adb has quit [Read error: Connection reset by peer]
[16:23:38] -!-
servos4ever has quit [Ping timeout: 240 seconds]
[16:28:22] -!-
phantoxe has quit [Remote host closed the connection]
[16:49:40] <psha> what is url of repository gpg key?
[16:51:55] <psha> only via gpg --recv-keys?
[16:54:32] -!-
adb [
[email protected]] has joined #linuxcnc-devel
[17:09:52] -!-
tiago_ has quit [Remote host closed the connection]
[17:26:27] -!-
jd896 has quit [Remote host closed the connection]
[17:27:37] -!-
BenceKovi has quit [Quit: Nettalk6 - www.ntalk.de]
[17:32:40] -!-
sendoushi has quit [Remote host closed the connection]
[17:33:25] -!-
andypugh [andypugh!~andy2@cpc2-basl1-0-0-cust639.basl.cable.virginmedia.com] has joined #linuxcnc-devel
[17:33:33] -!-
rogge has quit [Remote host closed the connection]
[18:08:42] -!-
phantoxe has quit []
[18:08:58] -!-
sumpfralle has quit [Ping timeout: 256 seconds]
[18:18:50] -!-
adb has quit [Ping timeout: 244 seconds]
[18:25:51] -!-
IchGuckLive has quit [Quit: ChatZilla 0.9.87 [Firefox 13.0/20120601201853]]
[18:27:10] Guest18985 is now known as
fragalot
[18:27:16] -!-
fragalot has quit [Changing host]
[18:28:54] -!-
TekniQue has quit [Ping timeout: 245 seconds]
[18:29:45] -!-
TekniQue has quit [Changing host]
[18:32:33] -!-
iwoj has quit [Quit: Computer has gone to sleep.]
[18:37:36] -!-
adb [
[email protected]] has joined #linuxcnc-devel
[19:05:52] -!-
bedah has quit [Quit: bye]
[19:13:17] -!-
Loetmichel has quit [Ping timeout: 265 seconds]
[19:22:51] -!-
adb- has quit [Remote host closed the connection]
[19:26:59] -!-
mung [
[email protected]] has joined #linuxcnc-devel
[19:29:21] <mung> anyone have a link to the .config file used to compile the kernel on the ubuntu 10.04 linux cnc live cd iso??
[19:33:09] <andypugh> I thought it existed in the linux directory somewhere?
[19:34:36] <mung> are the install instructions all I need :
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Ubuntu10.04Notes
[19:35:06] <mung> linux directory??? /you mean /usr/src/linux?????
[19:35:45] <andypugh> What are you trying to do? Are you wanting a custom kernel?
[19:36:24] <mung> yes, I want to start from something I know works
[19:37:00] <mung> I think I need to add some usb flash drivers
[19:37:18] <andypugh> OK.
[19:37:36] <mung> I want to run emc from a squashfs usb flash system
[19:39:10] <mung> is there a git location for all the kernel files used on the livecd??
[19:42:43] <andypugh> You might find what you want in /usr/src/linux-headers-2.6.32-122-rtai/.config
[19:45:46] <mung> ooops should have thought of that, but I just assumed would not be in the headers directory
[19:47:57] <mung> cheers for the help andy :)
[19:48:32] <andypugh> You mean I got the right answer with a kernel building query? I might need to have a lie down!
[19:50:13] <mung> well the config file definitly says "# Linux kernel version: 2.6.32-122-rtai
[19:50:13] <mung> # Tue Jul 27 12:43:59 2010" but I wont know if it works until I havwe actually tried to compile
[19:50:49] cylly2 is now known as
Loetmichel
[19:53:24] -!-
psha has quit [Quit: Lost terminal]
[20:08:51] -!-
rogge [
[email protected]] has joined #linuxcnc-devel
[20:36:37] -!-
mung has quit [Ping timeout: 248 seconds]
[20:40:32] -!-
kb8wmc [
[email protected]] has joined #linuxcnc-devel
[20:44:46] -!-
frallzor has quit [Ping timeout: 246 seconds]
[20:46:55] -!-
DJ9DJ has quit [Quit: bye]
[20:50:21] -!-
Keknom has quit [Quit: Leaving.]
[20:55:23] -!-
mung [
[email protected]] has joined #linuxcnc-devel
[21:13:38] -!-
mung has quit [Ping timeout: 240 seconds]
[21:16:08] -!-
micges has quit [Ping timeout: 240 seconds]
[21:26:59] -!-
iwoj has quit [Quit: Computer has gone to sleep.]
[21:27:40] -!-
mung [
[email protected]] has joined #linuxcnc-devel
[21:30:09] -!-
micges [
[email protected]] has joined #linuxcnc-devel
[21:36:42] -!-
FinboySlick has quit [Quit: Leaving.]
[22:03:54] -!-
syyl has quit [Quit: Leaving]
[22:04:23] -!-
pjm has quit [Quit: TTFO]
[22:11:22] -!-
jd896 has quit [Remote host closed the connection]
[22:27:49] -!-
joe9 has quit [Quit: leaving]
[22:53:48] -!-
KimK [KimK!~Kim__@2001:470:1f0f:1042:4261:86ff:fe43:bcad] has joined #linuxcnc-devel
[22:59:08] -!-
tom3p has quit [Ping timeout: 240 seconds]
[22:59:57] -!-
reder has quit [Remote host closed the connection]
[23:36:08] -!-
micges has quit [Quit: Leaving]
[23:56:38] -!-
mung has quit [Ping timeout: 240 seconds]