Back
[00:26:06] <Twingy> jepler, yea I have one of my students doing that as well, but eagle has a size limitation unless you buy the full version
[00:26:39] <Twingy> so in theory you could use PCB app -> eagle ->eagle script -> emc, which is a bit convoluted
[00:46:13] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/motion/ (command.c control.c motion.h): initial work for constant surface speed (g95)
[00:46:22] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/nml_intf/ (canon.hh emc.hh emc_nml.hh): initial work for constant surface speed (g95)
[00:46:36] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/rs274ngc/ (7 files): initial work for constant surface speed (g95)
[00:46:39] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/sai/saicanon.cc: initial work for constant surface speed (g95)
[00:46:42] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/task/ (emccanon.cc emctaskmain.cc taskintf.cc): initial work for constant surface speed (g95)
[00:48:10] <jepler> Twingy: that's true -- I would be happier if I had a GPL way to do circuit boards, but I haven't taken the time to learn PCB
[00:48:40] <Twingy> jepler, ok, when you do, you can use gcam to take a PCB gerber and covert to g-code
[00:48:45] <jepler> Twingy: but it's not so important to me that I've actually tried to learn PCB -- I rarely bump into the limitations of it
[00:48:47] <Twingy> as well as excellon drill file
[00:48:52] <jepler> inertia is a powerful thing
[00:49:20] <Twingy> I've also matched the rotate and zoom mouse buttons to match axis
[00:50:20] <jepler> Twingy: that will be convenient for users of both!
[00:51:14] <Twingy> hopefully
[00:51:41] <CIA-2> 03jepler 07TRUNK * 10emc2/docs/man/man9/.cvsignore: ignore new generated page
[00:52:49] <Twingy> any clue when the next emv live ubuntu cd is coming out?
[00:53:37] <jepler> Twingy: it was recently updated to include emc 2.1.6.
[00:54:12] <Twingy> any chance/interest in putting gcam on there?
[00:54:52] <jepler> Twingy: if you are interested in getting gcam into the hands of emc users, the first thing to do is make .deb packages. putting it onto a future live CD is several steps past that.
[00:55:11] <Twingy> k, I'll work on that
[00:55:24] <jepler> Twingy: do you have an ubuntu or debian machine where you can experiment with building .deb packages? The debian documentation is actually pretty good.
[00:55:34] <Twingy> I am on a feisty box right now
[00:55:57] <toastydeath> tell it to settle down and do the dishes
[00:56:26] <jepler> Twingy: after you get a .deb on a feisty box, it should not be too hard to tweak to build for dapper
[00:56:34] <Twingy> ok
[00:58:58] <Twingy> after I make the deb package I'd like to try and get it into synaptic
[01:09:07] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/rs274ngc/interp_check.cc: CSS: g95 dNNN limits spindle speed to NNN RPM
[01:14:03] <jepler> Twingy: personally I'd like to see gcam be easy for users to install
[01:14:47] <Twingy> synaptic would do that
[01:15:38] <jepler> Twingy: have you find the dpkg documentation yet? this is pretty good and most of it is relevant to ubuntu as well.
http://www.us.debian.org/doc/manuals/maint-guide/index.en.html
[01:16:20] <Twingy> not yet, working on a release, it's been 2 months and 1 day since the last one
[01:16:24] <SWPLinux> SWPLinux is now known as SWPadnos
[01:16:28] <Twingy> should have it ready by midnight
[01:16:57] <Twingy> DXF/STL and 4th axis support are the remaining big ticket items for gcam
[01:17:08] <Twingy> RS274X->RS274NGC was one of those
[01:56:08] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/task/emccanon.cc: css: units-related fixes
[03:00:45] <jepler> http://axis.unpy.net/01181527543
[03:09:19] <Jymmm> Optical Illusion I tell ya! ;)
[03:51:15] <Twingy> new gcam posted
[03:57:18] <tomp> did Dallur make a new THC without classicladder? ( with hal only )
[05:38:02] <tomp> A: yes, its the NewPlasmaDesign.odg. converting to Black & White now for my color challenged printer ;)
[06:26:14] <anonimasu> tomp:
[06:26:15] <anonimasu> hey
[06:30:13] <CIA-2> 03alex_joni 07TRUNK * 10emc2/src/emc/rs274ngc/ (5 files): use G96/G97 for CSS ON/OFF, and G95 for feed per revolution. It seems that G96/97 for CSS is quite common amongst other controls too (haas, fanuc, okuma, etc)
[06:51:08] <The-Ball> alex_joni, I think the mill is working now! I switched to q4 drive mode and made dual driving schmitt triggers (one goes high, one goes low), did some long jogs and queried the controllers, they returned to 0 :)
[06:54:19] <alex_joni> great stuff
[06:55:55] <The-Ball> yes, this is good fun, trying the chips penguine now in wood
[06:56:58] <The-Ball> after the first run of chips i would like to run it again in the same path, but I will drop the drill bit a bit lower, what is the best way to reposition for the next cut?
[06:58:00] <alex_joni> what GUI are you using?
[06:58:07] <The-Ball> axis
[06:58:13] <alex_joni> there is a button called touch-off
[06:58:22] <alex_joni> select the Z axis first
[06:58:32] <alex_joni> then use touch off, and enter a negative offset
[06:58:41] <alex_joni> e.g. go to Z0, touch off and enter -1
[07:01:02] <The-Ball> but do i need to go into mdi and do a g0 x0 y0 before I start the next cut?
[07:01:10] <alex_joni> only g0z0
[07:01:17] <alex_joni> but you can also skip that
[07:01:21] <alex_joni> and use the current Z value
[07:01:31] <alex_joni> say your Z axis is at 23.5
[07:01:40] <alex_joni> you can use touch off, and enter the new value beeing 22.5
[07:02:00] <The-Ball> ah! simple, thanks
[07:02:37] <The-Ball> i have never touched g-codes before
[07:02:52] <alex_joni> The-Ball: no problems, we all have been there :P
[07:03:12] <alex_joni> the best would be if you follow your guts/feelings
[07:03:22] <alex_joni> and let us know what doesn't feel intuitive
[07:03:33] <alex_joni> this can only help to improve things
[07:04:26] <The-Ball> cheers, very friendly bunch here
[07:04:35] <alex_joni> we do this for fun ;)
[07:04:39] <alex_joni> no reason not to be friendly
[07:05:48] <CIA-2> 03alex_joni 07TRUNK * 10emc2/src/emc/task/emctaskmain.cc: prevent switching modes from AUTO while interpreter not IDLE. Fixes bug #1734264
[07:17:14] <The-Ball> man the hours fly when you are having fun, didn't get to bed until 0430 yesterday
[07:25:04] <lerman_> lerman_ is now known as lerman
[08:49:29] <Jymmm> yo
[08:50:12] <Jymmm> we can dance
[08:50:14] <Jymmm> we can dance
[08:50:20] <Jymmm> everybody look at your hands
[08:51:20] <Jymmm> alex_joni: Whaaaaaaaaaaaaaaaaaaaaaz Up!
[08:52:13] <Jymmm> rock the casba.... rock the casba....
[09:16:25] <Jymmm> yo
[09:17:07] <alex_joni> hmm
[09:17:19] <alex_joni> someone's happy today
[09:17:25] <The_Ball> is the creator of gcam here?
[09:17:36] <Jymmm> alex_joni: LOL
[09:17:49] <Jymmm> alex_joni: I got music blaring here at work =)
[09:19:05] <Jymmm> this room is a huge echo chamber usually, right now the acustcs ar eworking in my favor!!!
[09:31:22] <alex_joni> nice
[09:32:34] <Jymmm> This new computer has front and rear audio jacks, so I have one set of speakers plugged into each =)
[09:42:24] <Jymmm> ok, close enough... I'm getting ready to get outtta here... so catch y'all later.... NO CARRIER
[13:03:39] <steves_logging> steves_logging is now known as steve_stallings
[13:13:19] <CIA-2> 03alex_joni 07TRUNK * 10emc2/src/emc/nml_intf/emc.cc: update called for the new fields
[14:01:20] <CIA-2> 03alex_joni 07TRUNK * 10emc2/src/emc/rs274ngc/ (4 files): require S-word along with G96
[14:01:57] <|Bo^Dick|> i'm dealing with this design myself,
http://www.carmi.se/misterstarshine/Projects/Orgoramia_drawbars.zip
[14:02:23] <|Bo^Dick|> it's gonna be a bitch to cad that one
[14:18:13] <steve_stallings> steve_stallings is now known as steves_logging
[15:24:10] <|Bo^Dick|> |Bo^Dick| is now known as Bo^Dick
[15:43:11] <alex_joni> hi guys
[15:43:32] <skunkworks> all fed and ready to work ;)
[15:43:39] <alex_joni> indeed
[15:43:46] <jmkasunich> hi
[15:44:05] <skunkworks> is the mazak in the same room as it was before?
[15:44:05] <alex_joni> * alex_joni is full of bugs
[15:44:45] <jepler> skunkworks: same room, but it's been moved around
[15:44:47] <skunkworks> alex_joni: programming or physically?
[15:44:54] <jmkasunich> physically
[15:44:58] <alex_joni> skunkworks: physically.. been dining outside
[15:45:02] <jmkasunich> much has been re-arranged
[15:45:09] <skunkworks> jepler: thanks
[15:45:16] <jmkasunich> the mazaks have been rotated 90 degrees
[15:45:36] <jmkasunich> the older of the two giddings and lewis mills is gone (we're sitting where it was)
[15:45:50] <skunkworks> ah - so the garaged door is behind the camera?
[15:46:00] <skunkworks> (on that wall)
[15:46:11] <skunkworks> garage
[15:46:57] <jmkasunich> yes
[15:47:22] <skunkworks> How is the weather?
[15:47:38] <skunkworks> so far
[15:49:25] <jmkasunich> yesterday was nice
[15:49:26] <jepler> skunkworks: cool yesterday warmer today and warmer still tomorrow
[15:49:31] <jmkasunich> today looks to be hotter
[15:49:40] <jepler> cloudy yesterday, sunny today
[15:50:44] <skunkworks> Jepler asked about my telescope - I will bring it... Probably be the first time I will actually use it for observing. ;) ( remember it is only 90mm)
[15:51:27] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/canterp/canterp.cc: implement G95 feed per revolution -- initial implementation uses position, but john k and chris r agree the implementation should ultimately use velocity instead
[15:51:27] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/kinematics/ (tc.h tp.c tp.h): implement G95 feed per revolution -- initial implementation uses position, but john k and chris r agree the implementation should ultimately use velocity instead
[15:51:28] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/motion/command.c: implement G95 feed per revolution -- initial implementation uses position, but john k and chris r agree the implementation should ultimately use velocity instead
[15:51:29] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/nml_intf/ (canon.hh emc.cc emc.hh emc_nml.hh): implement G95 feed per revolution -- initial implementation uses position, but john k and chris r agree the implementation should ultimately use velocity instead
[15:51:32] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/rs274ngc/ (gcodemodule.cc interp_convert.cc): implement G95 feed per revolution -- initial implementation uses position, but john k and chris r agree the implementation should ultimately use velocity instead
[15:51:36] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/sai/saicanon.cc: implement G95 feed per revolution -- initial implementation uses position, but john k and chris r agree the implementation should ultimately use velocity instead
[15:51:45] <CIA-2> 03jepler 07TRUNK * 10emc2/src/emc/task/ (emccanon.cc emctaskmain.cc taskintf.cc): implement G95 feed per revolution -- initial implementation uses position, but john k and chris r agree the implementation should ultimately use velocity instead
[15:52:17] <jepler> wow that was a bit spammy
[15:52:28] <skunkworks> power will be 50X and 128X
[15:52:35] <skunkworks> it is an entry level scope.
[15:52:48] <skunkworks> Good spam
[16:05:20] <skunkworks> is there more people this year?
[16:05:59] <skunkworks> -are-
[16:19:50] <jmkasunich> pics from the festcam compiled into a movie are now online
[16:20:07] <jmkasunich> link at the bottom of
http://linuxcnc.org/compile_farm/festcam.shtml
[16:21:54] <|Bo^Dick|> |Bo^Dick| is now known as Bo^Dick
[16:22:26] <JymmmmEMC> jmkasunich: WTH?! I don't see beer bottles all over the place?!
[16:22:37] <jmkasunich> we're programmers
[16:22:49] <jmkasunich> we live on caffeine and sugar, not ethanol
[16:23:09] <JymmmmEMC> dont see coffee cups either
[16:23:32] <JymmmmEMC> oh, say hi to Steve for me!!!
[16:23:50] <skunkworks> did fenn show up?
[16:23:54] <jmkasunich> not yet
[16:24:06] <JymmmmEMC> Ok, I stand corrected, Steve has a cup of joe
[16:24:38] <jmkasunich> and cradek is pouring one (in the last pic)
[16:24:59] <archivist> * archivist eyes a large jar of sweets
[16:25:35] <JymmmmEMC> So, how many are ther so far?
[16:26:40] <maddash> is it possible to link(ps/pp?) up params from different hal components, like with signals and pins?
[16:28:45] <SWPadnos> no
[16:29:06] <SWPadnos> that's the difference between pins and params
[16:29:23] <JymmmmEMC> Yo Stevey!
[16:29:58] <maddash> :(
[16:30:25] <maddash> i get the impression from scope.c that params are in shm - correct?
[16:30:30] <SWPadnos> Yo jimmie!
[16:30:52] <SWPadnos> yes, I think that's right
[16:31:51] <maddash> :( so much trouble just to see if an axis is still homing or not.
[16:32:07] <maddash> how was emcfest, or w/e happened in galesburg?
[16:32:37] <JymmmmEMC> Yeah, what IS happening at fest anyway?
[16:32:57] <SWPadnos> we're trying to get some work done, can you stop bugging us?
[16:33:00] <SWPadnos> :)
[16:33:16] <JymmmmEMC> SWPadnos: What kind of work ?
[16:33:30] <SWPadnos> I don't know yet, I'm still drinking my first coffee
[16:33:39] <JymmmmEMC> SWPadnos: oh, then get your ass off IRC already and GET TO WORK! lol
[16:33:53] <SWPadnos> hey, can't you see I'm working? (on my coffee)
[16:34:00] <maddash> SWPadnos: did you see my bug fix for the homing problem?
[16:34:07] <JymmmmEMC> SWPadnos: =)
[16:34:41] <maddash> i'm surprised cradek/ jepler/ alex_joni haven't taken the patch yet.
[16:34:47] <SWPadnos> maddash: I saw a patch that reinstated some commented out code (or something like that)
[16:35:12] <SWPadnos> I actually don't have access to commit list emails when I'm on the road (or any other lists, for that matter)
[16:35:13] <maddash> SWPadnos: eh? where?
[16:35:20] <SWPadnos> on IRC :)
[16:35:33] <JymmmmEMC> lol
[16:35:37] <SWPadnos> it was only a few lines, so it may not be what you're talking about
[16:35:58] <maddash> well, if it was submitted by maddash, then it's what i'm talking about
[16:36:23] <maddash> :) <--- happy that homing works again. brb.
[16:36:43] <JymmmmEMC> SWPadnos: you want a SX GBIC?
[16:36:44] <SWPadnos> heh - I won't know until next week, but great! I'm glad it works now ;)
[16:36:54] <SWPadnos> JymmmmEMC: I'm married, thank you!
[16:37:14] <JymmmmEMC> SWPadnos: That didn't answer my question though!
[16:37:39] <SWPadnos> oh
[16:37:54] <SWPadnos> so that's a fiber single-mode gigabit interface card? (or something like that)
[16:38:13] <JymmmmEMC> SWPadnos: yeppers, plugs into a switch
[16:38:23] <SWPadnos> sure, send it (them) over
[16:38:53] <SWPadnos> I only have one switch I can plug it into at the moment, but I'll probably upgrade to gigabit in the near future
[16:39:41] <JymmmmEMC> SWPadnos: Yeah, I doubt I'll ever go fiber gigabit
[16:39:59] <SWPadnos> heh - fiber seems better for 10gig, but that's just me
[16:40:06] <JymmmmEMC> SWPadnos: I had two, but I took the other one apart yesterday =)
[16:40:16] <SWPadnos> doh!
[16:40:58] <JymmmmEMC> Oh, and whoever told me there are magnets inside cdrom drives, thanks!
[16:41:08] <SWPadnos> heh
[16:41:14] <SWPadnos> really small ones, in the motors
[16:41:25] <skunkworks> umm - did the camera stop updating??
[16:41:31] <JymmmmEMC> SWPadnos: Actually, right next to the laser head, for alignment purposes.
[16:41:50] <SWPadnos> sure, voice coil alignment
[16:43:34] <JymmmmEMC> SWPadnos: BTW... I got some 25A@300VAC 12VDC coil DPDT relays for $2/ea the other day =) FINALLY found a place that had relays, only took two months.
[16:44:16] <SWPadnos> heh
[16:44:32] <JymmmmEMC> All I ever could find was 10A
[16:44:59] <JymmmmEMC> My soindle takes 11.5A starting up. More if I crank up the speed to max.
[16:45:59] <JymmmmEMC> spindle
[16:46:40] <archivist> oil that camera or let that guy put his arm down
[16:46:47] <JymmmmEMC> lol
[17:05:45] <CIA-2> 03cradek 07TRUNK * 10emc2/src/hal/utils/scope_disp.c: from jepler: make sure that coordinates sent to gdk fit within 16 bits
[17:18:44] <jmkasunich> camera has been oiled
[17:19:38] <archivist> hehe
[17:20:04] <JymmmmEMC> jmkasunich: Did you put glue on cradek's chair? Haven't seen him get out of it yet!
[17:20:07] <archivist> oo yes
[17:21:20] <jmkasunich> he's burning CDs to give away
[17:21:27] <skunkworks> Is there an encoder at the spindle on the mazak?
[17:21:41] <jmkasunich> yes
[17:21:44] <cradek> yes
[17:21:47] <skunkworks> Nice
[17:21:46] <cradek> heh
[17:27:48] <JymmmmEMC> Well, chit... This new computer doen'st have a spare internal USB header =( Guess I'll have to steal one from the front panel
[17:29:29] <skunkworks> camera locked up again :). might have to give up on it. (I really don't watch it that much ;))
[17:29:59] <archivist> wrong kind of oil
[17:30:02] <JymmmmEMC> Question... Can you use PC6400 DDR2 ram in a DDR2 333 system?
[17:31:07] <skunkworks> try it - probably
[17:31:57] <JymmmmEMC> I have to buy em before I cna try it =)
[17:32:08] <skunkworks> ah
[17:32:45] <JymmmmEMC> This box has 512 right now, but frys has 2x1GB for $74 after rebate.
[17:33:19] <JymmmmEMC> but they're 800MHz FSB
[19:31:20] <CIA-2> 03jmkasunich 07TRUNK * 10emc2/src/hal/utils/meter.c: open 'select' dialog when halmeter is started (unless an item to observe is specified on the command line)
[20:37:25] <anonimasu> *yawn
[20:37:27] <anonimasu> hey lh
[20:38:31] <gene__> hey guys
[20:38:51] <gene__> whats the command to update emc2 to 2.1.6?
[20:40:05] <skunkworks> * skunkworks only uses the update manager.
[20:41:04] <gene__> sudo adept found it, thanks
[20:42:30] <gene__> I thought I'd update it, then sharpen a case trimmer I'm about to crown a rifle barrel with.
[20:42:57] <anonimasu> eh?
[20:43:01] <anonimasu> case trimmer?
[20:44:03] <gene__> whats is the lowest practical angle? Yeah, a Lee case trimmer, for trimming rifle cases back to the correct length after they've been used a few time.
[20:44:36] <gene__> I somewhat resembles a 4 flute end mill, but only on the end face.
[20:44:46] <gene__> s/I/Uit
[20:44:56] <gene__> s/I/it
[20:45:00] <skunkworks> casings?
[20:45:09] <anonimasu> hm ok
[20:45:23] <gene__> yup, as in a 30-06 or so.
[20:45:39] <LawrenceG> brass things that you want to be on the right end of
[20:45:48] <anonimasu> :)
[20:45:52] <anonimasu> why not just buy the correct ones?
[20:46:09] <gene__> In this case, its a 30-06 Ackley Improved. You have to make them, not sold.
[20:46:16] <anonimasu> ah
[20:48:11] <gene__> They are fire formed from the regular 30-06, it expands the case to only a .020" taper, and puts a 40 degree shoulder in place of the 17 degree the factory case wears.
[20:48:50] <gene__> Holds about 8 grains more powder, and can run alongside a 300 H&H at full song.
[20:49:27] <JymmmmEMC> gene__: Do you do alot of gunsmithing?
[20:49:31] <anonimasu> *just got lost*
[20:50:24] <anonimasu> http://www.cncguns.com/
[20:50:27] <anonimasu> while at it
[20:50:35] <gene__> I built this one about 43 years ago, and I do all my own. No public, no BATD license.
[20:50:35] <anonimasu> * anonimasu stops by sometimes just to look at the cool machining
[20:51:07] <gene__> Thanks, I hadn't thoiught to try that site, I will tonight.
[20:51:15] <anonimasu> it's very very nice stuff
[20:51:22] <anonimasu> that guy is my idol :D
[20:51:22] <gene__> s/BATD/BATF
[20:52:03] <gene__> Whats a 3" x .750 piece of tool steel worth?
[20:52:14] <gene__> round on the .750"
[20:52:45] <gene__> I need to make a better crowning tool.
[20:52:58] <JymmmmEMC> gene__: I got a .25 in need of some TLC... I've tried different loads/brands of ammo, but most of the time the pin doesn't hit the primer hard enough to fire.
[20:53:19] <JymmmmEMC> gene__: It makes an indent, but that's it.
[20:55:59] <gene__> Sounds like a remington utomatic?
[20:56:05] <gene__> Sounds like a remington atomatic?
[20:57:23] <gene__> The bolt assembly in the only one I've comee in contact with takes remington only tools to dis it for cleaning, and if it ain't clean, it don't hit them hard enough.
[20:57:41] <gene__> So what kind is it?
[20:58:32] <gene__> Hello?
[20:59:26] <tomp> #join #emc-devel
[20:59:30] <JymmmmEMC> I had to go get it...
[21:00:44] <JymmmmEMC> gene__: It's german... DEUTSCHE WERKE [logo here] WERK ERFURT
[21:03:27] <JymmmmEMC> gene__: It sorta kind looks like this:
http://www.collectiblefirearms.com/Pictures/mlp_0029.JPG
[21:08:39] <JymmmmEMC> gene__: Found it... the 1-3 ones pictured here...
http://www.horstheld.com/0-makers-O.htm
[21:56:16] <anonimasu> *yawns*
[22:22:27] <JymmmmEMC> jmkasunich: You got no BAWLS!
[22:25:25] <JymmmmEMC> http://www.a1nutrition.com/graphics/Products/Bawls/bawls.jpg =)
[22:25:47] <JymmmmEMC> You guys just coding at feat or ???
[22:25:50] <JymmmmEMC> fest
[22:30:17] <JymmmmEMC> .VlY8VlY8VlY8VlY8VlY8Vly8.fHmc.C3jXChnZChjXdNfW.
[22:30:31] <skunkworks> what was that?
[22:30:56] <JymmmmEMC> Sorry... was testing a barcode scanner
[22:31:02] <toastydeath> a secret code, clearly
[22:31:11] <ds2> .XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
[22:31:22] <JymmmmEMC> One of those unmodified CueCat ones
[22:33:05] <toastydeath> it would be cool to buy some used surgical lamps
[22:33:15] <toastydeath> and run them on tracks over machines
[22:33:48] <toastydeath> too bad surgical lamps are expensive
[22:33:52] <toastydeath> i wonder if work would split the diff
[22:34:20] <toastydeath> er
[22:34:21] <toastydeath> split the cost
[23:15:12] <JymmmmEMC> toastydeath: I only have one thing to say.... WHAT?!
[23:15:21] <jmkasunich> jon elsone is here!
[23:15:47] <jmkasunich> elson even
[23:16:15] <JymmmmEMC> jmkasunich: Surprised or glad to see =)
[23:16:46] <skunkworks> mainly - he supplies the printer ;)
[23:16:56] <JymmmmEMC> oh, heh
[23:17:26] <JymmmmEMC> Heh, do my eyes deceive me.... A female presense at fest (or just passing thry)???
[23:17:32] <toastydeath> jymmmmemc:
[23:17:33] <toastydeath> ?
[23:17:42] <jmkasunich> jon's wife
[23:17:52] <jmkasunich> and his offspring units
[23:17:58] <JymmmmEMC> toastydeath: whatever you were talking about in respect to medical lighting
[23:18:33] <JymmmmEMC> jmkasunich: Ah, gotcha. Probably the only way a female would show up.... wonder if bribed or drugged her? LOL
[23:18:43] <toastydeath> that's not really a question, dude
[23:18:55] <toastydeath> at that point it's just an exclamation in a quizzical tone
[23:19:03] <JymmmmEMC> toastydeath: ah
[23:19:20] <toastydeath> do you have a real question regarding my statement
[23:19:26] <toastydeath> or just disbelief
[23:20:08] <toastydeath> http://www.dotmed.com/images/auctionpics/3815/1.jpg
[23:20:15] <toastydeath> that is a surgical lamp
[23:20:40] <toastydeath> the heads can be focused at various lengths, and are shadowless
[23:21:16] <toastydeath> they'll say you have from like, 1 foot to 7 feet, and you get 30" of shadowless depth in that range
[23:21:26] <toastydeath> 1-7' being the focal range
[23:45:44] <CIA-2> 03swpadnos 07TRUNK * 10emc2/src/hal/components/sample_hold.comp: New sample and hold component.
[23:48:09] <CIA-2> 03jepler 07TRUNK * 10emc2/src/hal/classicladder/module_hal.c: hal_exit in rtapi_app_exit
