#linuxcnc | Logs for 2012-02-27

Back
[00:00:43] -!- Tom_L [Tom_L!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[00:00:47] -!- zlog has quit [Ping timeout: 252 seconds]
[00:01:30] -!- zlog [[email protected]] has joined #linuxcnc
[00:01:33] -!- Tom_itx has quit [Ping timeout: 260 seconds]
[00:04:08] -!- theorb [[email protected]] has joined #linuxcnc
[00:04:51] -!- theorbtwo has quit [Ping timeout: 265 seconds]
[00:04:56] theorb is now known as theorbtwo
[00:05:09] -!- zlog_ [[email protected]] has joined #linuxcnc
[00:05:22] Tom_L is now known as Tom_itx
[00:05:42] -!- MattyMatt2 [MattyMatt2!~matt@cpc4-birk6-0-0-cust799.1-3.cable.virginmedia.com] has joined #linuxcnc
[00:06:05] -!- seb_kuzminsky has quit [Ping timeout: 272 seconds]
[00:08:04] -!- Tom_L [Tom_L!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[00:09:10] -!- Tom_itx has quit [Disconnected by services]
[00:09:16] Tom_L is now known as Tom_itx
[00:09:34] -!- zlog_ has quit [Ping timeout: 260 seconds]
[00:09:49] -!- zlog_ [[email protected]] has joined #linuxcnc
[00:09:57] -!- zlog has quit [Ping timeout: 244 seconds]
[00:12:52] -!- zlog [[email protected]] has joined #linuxcnc
[00:13:52] -!- zlog has quit [Remote host closed the connection]
[00:15:00] -!- rob_h has quit [Ping timeout: 265 seconds]
[00:15:14] -!- Tom_itx has quit []
[00:15:42] -!- Tom_itx [Tom_itx!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[00:15:46] -!- zlog_ has quit [Read error: Connection reset by peer]
[00:16:26] -!- zlog [[email protected]] has joined #linuxcnc
[00:19:22] -!- cstop [[email protected]] has joined #linuxcnc
[00:22:49] -!- mikegg [[email protected]] has joined #linuxcnc
[00:23:58] -!- Jim_ has quit [Remote host closed the connection]
[00:29:43] -!- A2Sheds has quit [Quit: puff of smoke]
[00:36:18] -!- tlab [[email protected]] has joined #linuxcnc
[00:38:17] -!- factor [factor!~factor@r74-195-184-248.msk1cmtc01.mskgok.ok.dh.suddenlink.net] has joined #linuxcnc
[00:41:21] -!- mhaberler has quit [Read error: Connection reset by peer]
[00:41:32] -!- mhaberler [[email protected]] has joined #linuxcnc
[00:45:09] -!- |n0b0dy| has quit [Ping timeout: 245 seconds]
[00:50:14] -!- |n0b0dy| [|n0b0dy|[email protected]] has joined #linuxcnc
[00:54:39] -!- phantoxe has quit []
[00:58:19] -!- sumpfralle has quit [Quit: Leaving.]
[00:58:44] -!- sumpfralle [[email protected]] has joined #linuxcnc
[01:00:00] -!- mhaberler has quit [Quit: mhaberler]
[01:05:49] -!- Tom_L [Tom_L!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[01:07:25] -!- seb_kuzminsky [[email protected]] has joined #linuxcnc
[01:10:13] -!- zlog has quit [Remote host closed the connection]
[01:10:17] -!- Tom_L has quit [Client Quit]
[01:10:20] -!- Tom_itx has quit []
[01:11:57] -!- A2Sheds [A2Sheds!~ly@unaffiliated/l84supper] has joined #linuxcnc
[01:12:21] -!- Tom_itx [Tom_itx!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[01:12:21] -!- tlab has quit [Quit: Leaving]
[01:12:33] -!- zlog [[email protected]] has joined #linuxcnc
[01:12:42] -!- Tom_L [Tom_L!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[01:24:09] -!- sumpfralle has quit [Read error: Operation timed out]
[01:38:20] <skunkworks__> ?
[01:38:29] -!- Roguish has quit [Ping timeout: 248 seconds]
[01:38:38] <skunkworks__> huh. from my perspective I thought I wasn't connected
[01:42:54] -!- seb_kuzminsky has quit [Ping timeout: 260 seconds]
[01:57:09] <cstop> non
[01:57:40] -!- danimal_laptop [[email protected]] has joined #linuxcnc
[01:57:50] <danimal_laptop> hi
[02:00:36] <Jymmm> ping
[02:03:11] -!- seb_kuzminsky [[email protected]] has joined #linuxcnc
[02:03:25] <Jymmm> Hi seb_kuzminsky!
[02:04:31] <seb_kuzminsky> hi there :-)
[02:10:30] <joe9> need some advice, please? I am thinking about this: "Light-Pressure Drill-Feed Attachment" #3100A45 http://www.mcmaster.com/#catalog/118/2422 and using it with either of these 2 drill bits (http://www.mcmaster.com/#2841A81 or http://www.mcmaster.com/#2860A94).
[02:10:45] <joe9> Any suggestions on which would be a better drill bit choice?
[02:11:12] <joe9> or, what do you think of this adapter? http://www.mcmaster.com/#30505A5
[02:11:28] <joe9> I am trying to drill through holes with that drill bit.
[02:21:22] -!- ries has quit [Quit: ries]
[02:40:12] <Connor> Which book is the "bible" of Machining?? and can it be gotten in ebook/pdf form ?
[02:41:29] <cstop> machineries Hand Book is a useful standard. No idea about ebook etc/
[02:45:45] <Tom_L> Connor i think you can get it on cd
[02:45:58] <Tom_L> but i like the machinist handbook
[02:46:07] <Tom_L> number (insert current number)
[02:46:23] <Tom_L> Machinery's Handbook
[02:46:47] <Tom_L> 28 maybe?
[02:46:52] <Tom_L> 29 who knows by now
[02:47:45] <archivist> I have number 13
[02:47:56] <Tom_L> i have 25
[02:48:03] <Tom_L> you are dated
[02:50:21] <archivist> I was wrong too, number 8 and 14
[02:50:49] <Tom_L> all the basics are there
[02:50:52] <Tom_L> they just add new stuff
[03:00:07] <joe9> My drill press belt has "Haimen V belt M24". I googled it and it seems to be a V belt with effective length of 24 inches. What does the "M" of the "M24" mean?
[03:01:06] <joe9> got it, sorry for the bother. "Vee belts are measured by section and length ."
[03:02:10] -!- skunkworks__ has quit [Remote host closed the connection]
[03:04:53] -!- cstop has quit [Quit: Leaving]
[03:05:12] <joe9> but, McMasterCarr does not have a "M" section.
[03:25:20] -!- Tom_itx has quit [Ping timeout: 260 seconds]
[03:25:59] -!- elmo40 has quit [Remote host closed the connection]
[03:27:54] -!- Tom_itx [Tom_itx!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[03:27:57] -!- Tom_afk [Tom_afk!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[03:28:15] -!- Tom_itx has quit [Disconnected by services]
[03:28:33] -!- elmo40 [elmo40!~Elmo40@CPE002129acb2d3-CM001bd7a89c28.cpe.net.cable.rogers.com] has joined #linuxcnc
[03:28:35] -!- Tom_L has quit [Disconnected by services]
[03:28:41] Tom_afk is now known as Tom_L
[03:29:03] -!- zlog has quit [Ping timeout: 252 seconds]
[03:29:03] -!- Tom_itx [Tom_itx!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[03:30:45] -!- zlog [[email protected]] has joined #linuxcnc
[03:57:27] -!- FinboySlick has quit [Quit: Leaving.]
[04:10:59] <danimal_laptop> any plasma experts in here?
[04:11:25] <danimal_laptop> trying to get my plasma cutter working, but it wont arc.
[04:11:40] <danimal_laptop> it has voltage between the nozzle and ground
[04:11:45] <danimal_laptop> and has air
[04:11:53] <danimal_laptop> torch is new
[04:13:03] <danimal_laptop> the plasma cutter is 30A but the tip is rated for 90-100a, will it not work with a nozzle rated that high?
[05:05:45] -!- Tom_L has quit []
[05:08:21] -!- psha[work] [psha[work][email protected]] has joined #linuxcnc
[05:36:38] |n0b0dy| is now known as |n00by|
[05:36:53] |n00by| is now known as |n0b0dy|
[05:38:39] -!- sirHOAX has quit [Quit: ..and.from.darkness.came.light..]
[06:22:05] -!- ve7it has quit [Remote host closed the connection]
[06:30:59] -!- mhaberler [[email protected]] has joined #linuxcnc
[06:44:50] -!- pingufan [[email protected]] has joined #linuxcnc
[06:45:12] <pingufan> Good morning from Austria!
[06:46:18] <pingufan> I am currently trying to use my tooltip sensor the first time, but my EMC2 refuses the following line of code: g43.1 z[#5063 - #1000]
[06:47:20] <pingufan> It sais that commands G43.1 ... don't have to contain X-,Y-,Z-, ... words.
[06:48:00] <pingufan> I got an example G-Code program for testing and this program contains that line.
[06:51:28] <pingufan> I use an older version of EMC2 (AXIS 2.3.5), because newer EMC causes troubles on my PC.
[06:51:44] <pingufan> Can somebody, please, help me?
[06:52:45] <iwoj> Hey doods.
[06:55:06] -!- iwoj has quit [Read error: Connection reset by peer]
[06:55:11] <pingufan> Hey!
[06:55:24] -!- iwoj [[email protected]] has joined #linuxcnc
[06:55:37] <iwoj> I've managed to get my X and Y axes moving, but my Z axis only moves in the
[06:55:45] <iwoj> positive direction.
[07:00:43] <anonimas1> elmo40: 118deg and hss
[07:02:37] -!- _abc_ [[email protected]] has joined #linuxcnc
[07:02:40] -!- _abc_ has quit [Changing host]
[07:02:40] -!- _abc_ [_abc_!~user@unaffiliated/ccbbaa] has joined #linuxcnc
[07:04:05] -!- The_Ball has quit [Read error: Operation timed out]
[07:04:14] -!- The_Ball [[email protected]] has joined #linuxcnc
[07:31:48] <Thetawaves> my work piece seems to be migrating
[07:35:13] <Jymmm> South for the winter?
[07:37:18] <Thetawaves> figured it out, missing steps when i plunge into the the work piece for the first cut of that level, it is rubbing against the edge causing lost steps
[07:45:20] -!- DJ9DJ [DJ9DJ!~Deejay@unaffiliated/dj9dj] has joined #linuxcnc
[07:45:37] <DJ9DJ> moin
[07:58:57] -!- capricorn_one has quit [Remote host closed the connection]
[08:01:08] -!- mhaberler has quit [Read error: Connection reset by peer]
[08:06:39] -!- mhaberler [[email protected]] has joined #linuxcnc
[08:26:50] -!- mhaberler_ [[email protected]] has joined #linuxcnc
[08:27:08] -!- mhaberler has quit [Ping timeout: 260 seconds]
[08:28:20] -!- Valen [Valen!~Valen@2001:44b8:3199:9100:21e:8cff:fe63:55df] has joined #linuxcnc
[08:28:38] -!- mhaberler [[email protected]] has joined #linuxcnc
[08:30:29] -!- mhaberler_ has quit [Read error: Connection reset by peer]
[08:30:29] -!- mhaberler has quit [Read error: Connection reset by peer]
[08:32:01] <mrsun> just issuing "M3" does that mean start spindle at max rpm or at lowst?
[08:32:03] <mrsun> lowest
[08:35:11] <pjm> i think u have to issue a speed too, unless a previous speed was issued
[08:35:35] <pjm> on my machine if i type M3 it wont turn the spindle unless i type M3 S1000 or so
[08:36:02] -!- mhaberler [[email protected]] has joined #linuxcnc
[08:40:59] -!- pingufan has quit [Read error: Operation timed out]
[08:41:56] <mrsun> hmm ok, playing around with pcb-gcode and all it issues in the gcode is M3 to start spindle
[08:42:01] <mrsun> that kinda sucks :P�
[08:42:26] -!- pingufan [[email protected]] has joined #linuxcnc
[08:42:55] <Valen> some spindles probably don't have a speed
[08:43:02] <Valen> check out what the manual says for the m3
[08:51:03] -!- mhaberler has quit [Read error: Connection reset by peer]
[08:51:38] -!- mhaberler [[email protected]] has joined #linuxcnc
[08:58:24] -!- m42 [m42!~M_42@unaffiliated/m42] has joined #linuxcnc
[08:59:05] <_abc_> Speaking of which, what M code is commonly used to pause machines?
[08:59:09] <_abc_> Especially Chinese ones?
[08:59:58] <_abc_> M01 ?
[09:00:08] <_abc_> M00 ?
[09:00:21] <_abc_> I mean a stop which permits continuation by the operator
[09:01:12] <Jymmm> MORE BABY MORE?
[09:02:30] -!- mhaberler has quit [Ping timeout: 260 seconds]
[09:02:50] <_abc_> Some Chinese machines seem to think it's okay to just not implement certain codes and continue with no warning. NOT GOOD.
[09:03:11] <_abc_> Oh, and, there is no manual. They don't know what they copied, apparently.
[09:03:17] * _abc_ leaves
[09:03:29] -!- rob_h [[email protected]] has joined #linuxcnc
[09:04:15] <Jymmm> trees
[09:08:00] <mrsun> ahh now spindle works just as good cw as ccw =)
[09:09:01] <Jymmm> what about anti-c/cw?
[09:09:25] <mrsun> huh ? :P
[09:09:35] <mrsun> thats what i ment, clockwise, counter clock wise
[09:09:37] <Jymmm> Just askin =)
[09:09:43] <Jymmm> exactly
[09:10:32] <mrsun> now i just would need a cabinett for the vfd and make some cables
[09:11:09] <Jymmm> I got nothing funny to say bout that, try again.
[09:12:30] <mrsun> haha :P
[09:13:47] -!- mhaberler [[email protected]] has joined #linuxcnc
[09:18:32] -!- _abc_ has quit [Ping timeout: 244 seconds]
[09:27:49] -!- mhaberler has quit [Read error: Connection reset by peer]
[09:30:23] -!- mhaberler [[email protected]] has joined #linuxcnc
[09:33:11] -!- mhaberler_ [[email protected]] has joined #linuxcnc
[09:33:11] -!- mhaberler has quit [Read error: Connection reset by peer]
[09:33:11] mhaberler_ is now known as mhaberler
[09:40:22] -!- mhaberler has quit [Read error: Connection reset by peer]
[09:40:46] -!- mhaberler [[email protected]] has joined #linuxcnc
[09:43:58] -!- mhaberler has quit [Read error: Connection reset by peer]
[09:47:50] -!- mhaberler [[email protected]] has joined #linuxcnc
[09:49:55] -!- mhaberler_ [[email protected]] has joined #linuxcnc
[09:49:56] -!- mhaberler has quit [Read error: Connection reset by peer]
[09:49:56] mhaberler_ is now known as mhaberler
[09:51:48] -!- phantoxe [[email protected]] has joined #linuxcnc
[09:54:01] -!- mhaberler has quit [Read error: Connection reset by peer]
[09:54:18] -!- mhaberler [[email protected]] has joined #linuxcnc
[10:23:09] -!- maximilian_h [[email protected]] has joined #linuxcnc
[10:23:09] -!- maximilian_h has quit [Client Quit]
[10:31:49] -!- seb_kuzminsky has quit [Ping timeout: 248 seconds]
[10:39:10] -!- mhaberler has quit [Quit: mhaberler]
[10:42:32] <elmo40> anonimas1: you should use carbide. and check those pages out for a better speed&feed
[10:53:58] -!- maximilian_h [[email protected]] has joined #linuxcnc
[10:54:04] -!- maximilian_h [[email protected]] has parted #linuxcnc
[11:03:38] -!- seb_kuzminsky [[email protected]] has joined #linuxcnc
[11:05:22] <seb_kuzminsky> is it true that gantrykins machines don't honor soft limits while in teleop/world mode? or do i have a sleepy misconfiguration somewhere? (in joint mode, after homing, the soft limits are respected)
[11:07:11] -!- bedah [[email protected]] has joined #linuxcnc
[11:09:07] <mrsun> gah fengrave wont vcarve just the letters, it V carves everything :P
[11:09:10] <mrsun> why =)
[11:10:22] <pingufan> hello. Can someone, please, help me with automatic tool length compensation? I posted in (my) earlier morning, but I still cannot get it working until now.
[11:13:30] <pingufan> I got a testing program (G-Code program), but it appears to me that several commands are not supported by AXIS 2.3.5
[11:16:55] <pingufan> Is somebody here familiar with tool probing and how it has to be done in 2.3.5 ?
[11:24:30] -!- Rogue_ [Rogue_!42bff3ba@gateway/web/freenode/ip.66.191.243.186] has joined #linuxcnc
[11:28:13] <awallin> pingufan: looks like G43.1 takes values in IJK format. at least on 2.3.5 (this may have changed for later versions)
[11:31:04] <pingufan> Hmm - I am not shure what this changes. How do I code then this part?
[11:31:19] <pingufan> (I am a newbe)
[11:32:02] <awallin> K would correspond to Z-axis. so try G43.1K123.45
[11:32:25] <jthornton> G38.2 Z-1.0 (probe down a maximum of 1.0 units, if no contact by then error)
[11:32:36] <pingufan> The variables used by the toll probe are the same?
[11:32:43] <pingufan> tool probe
[11:33:16] <pingufan> I have here: #5063
[11:34:48] <pingufan> So I simply replace g43.1 z[#5063-#1000] with g43.1 k[#5063-#1000] and that's it ?
[11:35:27] <awallin> try that..
[11:36:21] <jthornton> G43.1 only takes axes letters
[11:36:34] <pingufan> Currently I run a longer milling job, must wait until it is finished.
[11:36:54] <pingufan> jthornton: What does this mean in practice?
[11:37:47] <jthornton> I don't understand your question
[11:37:49] <pingufan> jthornton: my AXIS 2.3.5 does not accept x,y,z with G43.1
[11:38:29] <jthornton> oh, 2.3 is very old and may not even have G43.1
[11:39:14] <jthornton> I don't even have docs for 2.3 any more
[11:39:40] <pingufan> Actually it sais that G43.1 does not alloe X,Y,Z so it seems that it knows this command. Otherwise it would say "Unknown G Word"
[11:40:02] <jthornton> what do your docs say about it?
[11:41:02] <pingufan> My problem is that a newer version (I tried it before) does not work with my hardware. This might have changed again, but I don't like surprises.
[11:41:35] <jthornton> then you will have to read the 2.3 docs and figure out how it works
[11:41:51] <awallin> did you try IJK? that is what the 2.3.x docs say http://www.linuxcnc.org/docview/2.3/html/ no use speculating before you tried that..
[11:42:10] <jthornton> wow, you found them
[11:43:08] <pingufan> awallin: I must wait until the running milling job is finished. (PCB milling is awfully slow.)
[11:43:34] <jthornton> not much to speculate on now "To use a tool length offset from the program, use G43.1 I- K-, where I- gives the X tool offset (for lathes) and K- gives the Z tool offset (for lathes and mills). "
[11:45:47] <pingufan> Thank you a lot. The variable (where the tool-probe stores the value is still the same? (#5063) ?
[11:46:03] <jthornton> I have no idea, you will have to read your docs
[11:46:38] <jthornton> it will give you something to do while the PCB mills :P
[11:47:03] <pingufan> Is there a replacement for (print, blah #1000) which works in 2.3.5? (msg, ....) works, but doesn't print the value of #1000.
[11:47:56] <jthornton> you might read your docs and see if debug is supported
[11:48:20] <pingufan> Ah, this is "debugging". Good to know.
[11:50:07] -!- cncbasher [cncbasher!~quassel@cpc15-hart9-2-0-cust101.11-3.cable.virginmedia.com] has joined #linuxcnc
[11:58:22] <pingufan> Reading the right manual is indeed helpful. :) Should work as expected when I only replace z with k
[12:02:31] -!- factor has quit [Read error: Connection reset by peer]
[12:02:34] <jthornton> yes, many things can and do change between versions
[12:04:30] -!- m42 has quit [Quit: m42]
[12:09:40] -!- jbunch has quit [Ping timeout: 276 seconds]
[12:11:27] <pingufan> Has much important stuff changed between 2.3.5 and the current version, or was it primarily fixing bugs?
[12:15:11] <jthornton> http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Released
[12:20:40] -!- factor [factor!~factor@r74-195-184-248.msk1cmtc01.mskgok.ok.dh.suddenlink.net] has joined #linuxcnc
[12:30:40] <Valen> pingufan: do you hang out on the piclist?
[12:30:54] <Valen> i know your name from somewhere
[12:34:19] -!- mhaberler [[email protected]] has joined #linuxcnc
[12:36:41] <pingufan> Which piclist?
[12:36:54] <Valen> THE piclist ;->
[12:37:00] <Valen> email list
[12:37:04] -!- servos4ever [servos4ever!~chatzilla@74-45-201-222.dr01.hnvr.mi.frontiernet.net] has joined #linuxcnc
[12:37:18] <Valen> [email protected]
[12:37:33] <pingufan> piclist sais nothing to me.
[12:37:51] <Valen> nevermind, probably nothing
[12:38:02] <pingufan> What is this piclist's theme?
[12:38:10] <Valen> pic microcontrollers
[12:38:27] <pingufan> Then it might be that I appear there. :)
[12:54:18] -!- mrsun_ [mrsun_!~mrsun@c-c03de253.4551536--62697410.cust.bredbandsbolaget.se] has joined #linuxcnc
[12:54:25] <mrsun_> awallin, you there ?
[12:55:14] -!- pingufan has quit [Quit: Konversation terminated!]
[12:58:18] <awallin> mrsun_: hi
[12:58:53] <mrsun_> awallin, ello =) trying to run your ttt2medial script and getting error =)
[12:59:16] -!- mhaberler has quit [Quit: mhaberler]
[12:59:18] <awallin> ok.. pastebin your error ?
[12:59:27] <mrsun_> http://pastebin.com/LYMdh0fE
[13:00:04] <awallin> yeah, that changed... and apparently I did not update the script. hold on.
[13:00:30] -!- mhaberler [[email protected]] has joined #linuxcnc
[13:00:43] <mrsun_> awallin, great =)
[13:01:55] -!- mhaberler has quit [Client Quit]
[13:02:11] <awallin> here's the change https://github.com/aewallin/linuxcnc-scripts/commit/e16a6804dd2fcb6e68f9f9e25ee6762ad054c845 or you can do a pull
[13:04:11] -!- mhaberler [[email protected]] has joined #linuxcnc
[13:04:28] <mrsun_> nice =)
[13:04:37] <mrsun_> should write a real engraving app around that stuff =)
[13:05:50] -!- psha[work] has quit [Quit: Lost terminal]
[13:10:21] <awallin> truetype-tracer doesn't support kerning. that's a real problem. should switch to pango or cairo or something.
[13:22:16] -!- mhaberler has quit [Read error: Connection reset by peer]
[13:22:35] -!- mhaberler [[email protected]] has joined #linuxcnc
[13:23:28] <awallin> mrsun_: any luck with that script? if/when you change the text you need to change the scale also, to keep it within the unit-circle. and if you get the kerning-problems (overlapping characters) then there is not much that can be done (change font)
[13:23:29] -!- Valen has quit [Quit: Leaving.]
[13:25:56] -!- mhaberler has quit [Client Quit]
[13:32:16] <joe9> does anyone have experience with this: http://www.mcmaster.com/#3100a45 ?
[13:32:52] <DJ9DJ> to continue, please log in...
[13:38:35] <mrsun_> awallin, works great =)
[13:38:40] <mrsun_> very nice carvings =)
[13:42:13] <MattyMatt2> will ECP work for parport mode? stupid bios shows a list of 4 modes in the help pane, but the menu options only have 3
[13:42:46] <awallin> mrsun_: nice. send me some pictures if you do some cutting!
[13:44:22] <MattyMatt2> emc2 crash log also suggested bios needs an upgrade anyway. I hope lenovo support pre-lenovo thinkpads :p
[13:44:57] <mrsun_> awallin, it was just a test, trying to find a program to make a candy box for the dog with its name on and i want the text to look nice =)
[13:45:51] <mrsun_> awallin, where is cut depth set in the script? :)
[13:46:42] <awallin> I guess it assumes z=0 to be the stock surface. then it assumes a 90degree cutter, and the cut-depth is set so that the width of the letter comes out right
[13:47:28] <mrsun_> awallin, got a 60 degree cutter ...
[13:47:29] <mrsun_> i think it is
[13:47:41] <mrsun_> can i set the cutter degrees somehow ? :)
[13:48:29] <MattyMatt2> you could fake that by scaling your Z steps
[13:49:33] <MattyMatt2> that's an evil solution tho
[13:50:28] -!- ries [[email protected]] has joined #linuxcnc
[13:50:30] <awallin> the z-values seem to come out of openvoronoi on lines 22 and 29 of ttt2medial.py you could scale there with a suitable number
[13:51:34] -!- gene77 has quit [Read error: Operation timed out]
[13:56:39] -!- m42 [m42!~M_42@unaffiliated/m42] has joined #linuxcnc
[14:01:08] <MattyMatt2> oh ffs, 2nd thinkpad has same bios problem. no EPP selectable
[14:02:14] <MattyMatt2> and a weirdness. latency test works from inside stepconf but fails silently from gnome menu
[14:03:00] <MattyMatt2> and I got a jitter spike of 300k ns in both threads :p
[14:03:18] -!- Cylly [[email protected]] has joined #linuxcnc
[14:03:30] <MattyMatt2> not that I care about that too much at the moment
[14:04:21] <awallin> laptop -> bad idea...
[14:04:25] <MattyMatt2> no more old thinkpads off ebay for me
[14:04:52] -!- Loetmichel has quit [Ping timeout: 265 seconds]
[14:05:03] <MattyMatt2> even modern ones with 2+ cores?
[14:05:28] <MattyMatt2> of course modern ones have no parports, so I guess not :)
[14:06:28] <MattyMatt2> k, time to buy a psu for my old p3. at least it has an mga400 in it
[14:06:33] <awallin> too much power-saving stuff I think
[14:07:03] -!- pingufan [[email protected]] has joined #linuxcnc
[14:07:37] <Thetawaves> MattyMatt2, get an atom based system
[14:08:24] -!- gene77 [[email protected]] has joined #linuxcnc
[14:08:40] <MattyMatt2> no cash for new hardware really. I'd need a screen etc. that's really why I'm using a lappy where I am
[14:08:51] -!- Rogue_ has quit [Quit: Page closed]
[14:13:29] <MattyMatt2> if mesa did a pci card with an atom on, at no more increment than the chip price, I'd be tempted
[14:13:56] -!- adb has quit [Ping timeout: 240 seconds]
[14:16:34] <MattyMatt2> someone is making a fpga/opencore controller for repraps. getting full emc2 on that would be neat
[14:16:53] <awallin> keeping up with the rate at which intel pushes out new chips might be a challenge
[14:17:38] <MattyMatt2> yeah they stopped making 386sx a couple of years ago too :)
[14:18:15] <MattyMatt2> I think they still have sufficient inventory for long term support tho
[14:20:56] -!- psha [[email protected]] has joined #linuxcnc
[14:21:47] -!- mhaberler [[email protected]] has joined #linuxcnc
[14:24:08] <joe9> each drill bit is $13. isn't that expensive? http://www.mcmaster.com/#2860a94
[14:25:02] <Thetawaves> your first mistake is using mcmaster
[14:25:18] <mikegg> try harbor freight :)
[14:25:30] <Thetawaves> or amazon
[14:26:08] <JT-Shop> good drill bits are not cheap, harbor freight sells cheap bits
[14:26:30] <JT-Shop> mcmaster is not the lowest but they have everything :)
[14:27:08] <mikegg> yeah, I bought a tap set from HF. It's good for tapping delrin. not much else...
[14:27:52] <Thetawaves> i have found some high quality stuff on amazon
[14:27:55] -!- adb [[email protected]] has joined #linuxcnc
[14:27:56] <JT-Shop> I bought a couple of drill bit sets that came from China, I returned them as soon as I opened the box
[14:28:10] <Thetawaves> the trick is to not but the cheapest pos available
[14:28:38] <joe9> mikegg: thanks.
[14:28:53] <JT-Shop> joe9: you looking for circuit board bits?
[14:29:00] <joe9> JT-Shop: yes.
[14:29:02] <Thetawaves> i am
[14:29:23] <JT-Shop> http://www1.mscdirect.com/eCommerce/NavigationServlet/Holemaking/Drilling-Drill-Bits/Circuit-Board-Drill-Bits/_/N-77h4l?refinement=4291252744&searchandizedOk=Y
[14:29:36] -!- FinboySlick [[email protected]] has joined #linuxcnc
[14:29:47] <joe9> what do you think of this? does anyone have experience with it: http://www.mcmaster.com/#3100a45 ? I am thinking of buying it for my big drill press.
[14:29:48] <Thetawaves> i wonder about these http://www.amazon.com/Carbide-Engraving-Bits-Degree-0-1mm/dp/B005LYVUH2/ref=pd_sim_sbs_hi_9
[14:31:42] <mikegg> joe9: do you have a chuck for it? looks neat, but I wouldn't want to shell out +$200 for the chuck
[14:33:04] <joe9> mikegg: I am thinking of buying this chuck http://www.mcmaster.com/#2812a11
[14:33:15] <joe9> $69'ish.
[14:33:39] <JT-Shop> I've used a similar one for drilling tiny holes
[14:34:14] <JT-Shop> the real cheap ones don't center the bit well... if at all
[14:34:30] <joe9> JT-Shop: what do you think? worth it? I am trying to make a 5mm (diameter) 0.5mm slot and plan on using this for it.
[14:34:39] <joe9> and, also some 0.5mm through holes.
[14:35:08] <theorbtwo> I expect you can get a 0.5mm bit much cheaper then a 0.1mm bit.
[14:35:33] <Thetawaves> why not go the other way and get a bunch for cheap? http://www.goldmine-elec-products.com/products.asp?dept=1273
[14:36:03] <joe9> JT-Shop: will it help if I use this bit instead? http://www.mcmaster.com/#2841a81 for the 0.5mm through holes
[14:36:44] <JT-Shop> help=fit my current chuck?
[14:39:17] <joe9> JT-Shop: I was thinking of the "centering". These bits might be easier to center.
[14:39:31] <joe9> given that they have the thicker shank.
[14:41:12] <joe9> mikegg: the msc center in Mableton GA. Is it comparable to McMasterCarr? Have you used them to pick up stuff?
[14:42:13] <JT-Shop> just depends on your drill chuck I assume
[14:42:54] <mikegg> is it in Mableton? I know there is one somewhere around here. I think i've been there once. Not quite as big as McMaster, but definitely competitive
[14:43:26] <joe9> ok, thanks. it seems cheaper. do not know about the quality of the products, though.
[14:44:12] <jdhnc> joe9: never used one of those belts, I've heard they work though.
[14:44:26] <joe9> jdhnc: thanks.
[14:48:25] <joe9> mikegg: mcmastercarr.com is better organised than mscglobal.
[14:48:57] <joe9> mikegg: just chatted with mscglobal.com rep, and, yes, they have willcall as long as the item is available in that location.
[14:49:35] <jdhnc> I have a friend in atlanta that gets same day UPS from mcmaster
[14:51:53] <mikegg> oh yeah, their dynamex courier will get it to you before lunch if you're in the city.
[14:52:13] <joe9> is it free, or, is there a charge?
[14:52:26] <jdhnc> normal ups shipping charges
[14:52:30] <mikegg> hah, you pay for it
[14:53:12] -!- m42 has quit [Quit: m42]
[14:53:48] -!- mhaberler has quit [Read error: Connection reset by peer]
[15:02:46] <JT-Shop> mcmaster sends all freight directly to the UPS hub so it goes out that night and saves a day on shipping
[15:03:18] <joe9> the website is also pretty slick.
[15:03:28] <joe9> has all the needed parts linked up.
[15:05:39] <jdhnc> $d00d said UPS has a hub at the atlanta mcmaster warehouse
[15:07:00] <joe9> not surprised, they have a lot of container trucks there.
[15:09:03] <mikegg> also lots of hookers
[15:09:42] <danimal_laptop> hi
[15:09:58] <joe9> mikegg: really. need to keep my eyes open this time.
[15:10:44] <danimal_laptop> hi JT-Shop
[15:11:17] <MattyMatt2> I'm making an edm drill for tiny holes
[15:11:46] <JT-Shop> Hi Dan!
[15:11:51] <danimal_laptop> how goes it
[15:11:53] <MattyMatt2> just needs a collet and a psu that does cut out from the solenoid
[15:12:01] <MattyMatt2> ^n't
[15:12:12] <JT-Shop> good, did you get your plasma to fire off?
[15:12:25] <danimal_laptop> not yet
[15:12:38] <danimal_laptop> just woke up
[15:12:57] <danimal_laptop> thinking i need to change the tip to a smaller one
[15:13:40] <danimal_laptop> it's got a 100a thermadyne torch on a 30a cutter
[15:14:45] <JT-Shop> my hypertherm had different tips for different amp settings
[15:14:58] <JT-Shop> is it a machine torch or a hand torch?
[15:15:05] <danimal_laptop> hand
[15:15:09] <joe9> mikegg: do you have a preference between these 2 drill bits, assuming I have the other attachments for both: http://mcmaster.com/#2860A94 or http://mcmaster.com/#2841A81
[15:15:35] <joe9> the one with the shank is cheaper, but, I am not sure why it is cheaper.
[15:15:46] <joe9> less accuracy?
[15:16:04] <joe9> if you had a choice, which one do you prefer?
[15:16:16] <MattyMatt2> they lose fewer while grinding them >:)
[15:16:17] <danimal_laptop> i get voltage between the electrode and ground clamp, it's got good air pressure, not sure what else it can be. the torch is new
[15:16:44] <joe9> MattyMatt2: was that for me?
[15:16:48] <MattyMatt2> arrr
[15:17:12] <JT-Shop> the plasma is used?
[15:17:14] <MattyMatt2> do you need deep holes? if not I'd go for the shanked ones every time
[15:17:17] <danimal_laptop> yea
[15:17:26] <danimal_laptop> its an old one with a new torch
[15:17:32] <joe9> MattyMatt2: not deep holes. just 1/32inch.
[15:17:45] <JT-Shop> does it have to drag on the surface to start the arc?
[15:17:49] <joe9> or, at the most 1/16 inch.
[15:18:19] <joe9> MattyMatt2: thanks a lot.
[15:18:23] <MattyMatt2> those sizes are large enough to use straight shank
[15:18:25] <JT-Shop> mine will pop a small start arc out even if your not near the metal (not good for the tip)
[15:18:50] <MattyMatt2> below 1/32" I'd use shanked
[15:18:51] <danimal_laptop> not sure, it has a drag cone wich isnt listed in the parts manual for anything under 50a
[15:19:11] <danimal_laptop> that might put the electrode too far away
[15:19:23] <danimal_laptop> for that few of amps
[15:19:27] <JT-Shop> mine has a drag tip too but it is only to keep the proper distance while you cut
[15:19:36] <MattyMatt2> or actually I'd make an edm drill :) that's what I've done. I got sick of busting tiny drills
[15:19:40] <JT-Shop> do you have a manual on the plasma
[15:20:19] <danimal_laptop> http://thermadyne.com/IM_Uploads/DocLib_3772_0-4989.pdf
[15:20:25] <danimal_laptop> page 6-6
[15:20:31] <danimal_laptop> parts list for the torch
[15:20:45] <danimal_laptop> i do not have a manual for the plasma, only the torch
[15:21:05] <joe9> I found the taper-shank drill bits. Why not just use them instead of bothering with the chuck & arbor?
[15:21:30] <MattyMatt2> expensive is the only reason
[15:21:44] <joe9> ok, thanks.
[15:22:18] <MattyMatt2> make sure your spindle is running true tho, as there's no other way to correct it
[15:22:41] -!- psha has quit [Read error: No route to host]
[15:22:52] -!- psha [[email protected]] has joined #linuxcnc
[15:23:01] <MattyMatt2> so one of those would be good to measure your quill's runout
[15:23:29] <joe9> MattyMatt2: oh, ok. good idea. I am planning on buying a new chuck and arbor and see how bad it is.
[15:23:52] <joe9> I read that it is not a big deal to change the spindle bearings.
[15:24:10] <JT-Shop> Dan The torch includes a 'Parts - In - Place' (PIP) circuit. When the shield cup is properly installed, it closes a switch. The torch will not operate if this switch is open.
[15:24:50] <MattyMatt2> yeah if they are cheap radial bearings you're OK, but you might need a press to fit them
[15:25:13] <joe9> MattyMatt2: Anyway, I think it is not the spindle but the chuck or chuck/arbor connection. The reason I say this is, runout at the quill = 0.002 inches, runout at the beginning of the arbor (quill/arbor connection): 0.002 inch, runout at end of arbor (arbor/chuck connection) = 0.0002 inches.
[15:25:17] <danimal_laptop> JT-Shop: yea, i saw that
[15:25:29] <joe9> MattyMatt2: runout at chuck = 0.015 inches.
[15:25:40] <danimal_laptop> however the torch has voltage at the electrode when the trigger is depressed
[15:25:50] <JT-Shop> you have a cutmaster a120 torch but the plasma is a different model?
[15:26:05] <joe9> MattyMatt2: that makes me think that it is the chuck or the chuck/arbor connection.
[15:26:14] <joe9> MattyMatt2: would you concur?
[15:26:27] <danimal_laptop> the torch is a sl100, and yea, its on some old plasma made by sip
[15:26:45] <MattyMatt2> seems possible. there's a finite error everywhere always, but that does sound like the worst one in your setup
[15:27:29] <joe9> MattyMatt2: given that they were all harborfreight ones and which I bought used, I figure putting in a new chuck/arbor is a good idea.
[15:28:04] <MattyMatt2> there's a UK place selling sets of 3 chucks on MT1 or 2 for £10. andypugh reckons they're OK
[15:28:15] <joe9> that is pretty cheap
[15:28:41] <jdhnc> joe9: not really sure what you are doing, but perhaps it woudl be worthwhile to invest in something appropriately sized for the job and with more precision than typical HF stuff?
[15:28:46] <joe9> I am about to pay $69 for mine: http://mcmaster.com/#2812a11
[15:29:34] <joe9> jdhnc: I agree. I am trying to do the best I can given what I have. If I can get something reasonably good, I want to just build a cnc machine. I have the bom for that, too.
[15:30:11] <joe9> In the meantime, I am trying to get the drill press to work. I have a good vise that is pretty smooth. (upgraded from a crappy one)
[15:30:35] <danimal_laptop> JT-Shop: they have the 30a consumables at the local airgas, i think i might try them. someone on practical machininst confirmed that it might not arc with the 100a tip
[15:30:48] <joe9> jdhnc: and, the drill press runout at the spindle/quill is 0.002 inches, which I consider good enough for drilling 0.5 mm (0.02 inch) holes.
[15:30:58] <MattyMatt2> everything can be improved if you have lots of spare time and little money
[15:31:10] <JT-Shop> yea, that cold be it... but some of that stuff is magic
[15:31:37] <joe9> jdhnc: and the simplest cost-effective solution, would be to get a new chuck/arbor and try.
[15:31:51] <joe9> jdhnc: do you agree?
[15:32:00] <joe9> MattyMatt2: I agree.
[15:32:17] <jdhnc> I agree, if the new arbor & chuck are better.
[15:32:33] <MattyMatt2> did you manage to separate your chuck & arbour?
[15:32:44] <jdhnc> if they aren't, you just wasted more money
[15:32:49] <joe9> if not, I will just return the stuff at McMaster and start looking at milling machines.
[15:33:05] <joe9> MattyMatt2: no, I could not separate the old chuck/arbor.
[15:33:25] -!- GoSebGo has quit [Quit: Bye]
[15:33:41] -!- GoSebGo [[email protected]] has joined #linuxcnc
[15:33:47] <MattyMatt2> McMaster don't sell crap afaik, so it should be better than an average used one
[15:33:48] <joe9> jdhnc: I am picking this stuff, so, no shipping charges.
[15:34:37] <jdhnc> putting a 'precision' chuck on a HF drill press just doesn't inspire much confidence for me :)
[15:35:04] <jdhnc> I've been trying to give away my chinese 13" drill press with no luck
[15:35:07] <MattyMatt2> I'd gamble on the £10 for 3. unless they've already been graded the odds are that one at least has low runout
[15:35:08] <joe9> MattyMatt2: no, I am not sure if the old arbor will fit the new chuck and if the bad part is the chuck/arbor connection, I do not want to risk it with an old arbor.
[15:35:31] <mazafaka> "HF" = ?
[15:35:37] <MattyMatt2> joe9, I was thinking more like a new arbor & the old chuck
[15:35:45] <mazafaka> 'High Force' ?
[15:36:13] -!- theorbtwo has quit [Ping timeout: 244 seconds]
[15:36:23] <jdhnc> maz: harbor freight
[15:36:27] <mazafaka> oh
[15:37:12] <joe9> MattyMatt2: no, that would not work in my case, as I want to use the "drill press attachment" http://mcmaster.com/#3100a45 and it needs special chucks, I think.
[15:37:22] <MattyMatt2> I'm lucky my old lathe and old B&D have compatible jacobs chucks, so they can share
[15:37:28] <mazafaka> apply low feedrate per revolution, high speed and use it to drill blanks and flanges
[15:37:46] <MattyMatt2> I can't see your McM links
[15:38:04] <joe9> jdhnc: but, the drillpress has a runout of 0.002 inches. If you remove the whole "Harbor Freight" thing, it seems not that bad.
[15:38:17] <joe9> jdhnc: this is what I found from reading on the internet.
[15:38:29] <joe9> about the "acceptable runout"
[15:38:41] <MattyMatt2> what taper is it?
[15:39:06] <MattyMatt2> if it's a standard one you can get an arbour anywhere, in all kinds of qualities
[15:39:30] <MattyMatt2> and all kinds of chuck attahments
[15:39:39] <joe9> MattyMatt2: try this: http://www.mcmaster.com/#3100a45
[15:40:15] <MattyMatt2> wow that one worked, but it's the same URL as before
[15:40:24] -!- syyl [[email protected]] has joined #linuxcnc
[15:40:24] <joe9> MattyMatt2: added www.
[15:40:33] <MattyMatt2> aha yeah
[15:40:43] <Jymmm> add MMA too
[15:43:34] <MattyMatt2> that tiny chuck looks like what I need for my edm drill. I was going to make a "zero size" dremel collet
[15:46:16] <MattyMatt2> holding the drilling wire in pointed setscrews may be a better idea tho, so I can adjust it for straightness
[15:46:43] <joe9> any pics?
[15:47:23] <joe9> are you talking about this: http://www.mcmaster.com/#30505a5 ?
[15:48:01] <MattyMatt2> it's just a solenoid with a delrin slide, if you'r talking about my edm drill
[15:48:26] <MattyMatt2> a big soft spring and adjustable stops
[15:48:38] <joe9> no, I meant what you are talking about with this: "pointed setscrews"
[15:48:53] <MattyMatt2> and a big delrin plug on the end while I decide how to do the chuck
[15:48:54] <joe9> MattyMatt2: I think that is a good idea.
[15:49:47] <MattyMatt2> McM wants me to log in now, but the idea is like a tiny 4 jaw chuck, or 2 in a row
[15:50:11] <MattyMatt2> that gives me full control of straightness and runout
[15:52:25] <MattyMatt2> I don't really want to use the edm drill on my lathe tho, in case I end up welding the work to the lathechuck, or the chuck jaws etc
[15:52:58] <MattyMatt2> I guess it'd be safe If I clamped the earth wire direct to the workpiece
[15:56:53] <pcw_home> I would worry that may still get current through the lathe bearings
[15:57:48] <pcw_home> unless you insulate the workpiece/tool from the lathe
[15:57:57] -!- mhaberler [[email protected]] has joined #linuxcnc
[16:00:23] <MattyMatt2> yep, I'll probably not bother with the lathe, and just make a rotatable workpiece holder on the drill itself
[16:00:46] <joe9> MattyMatt2: why did you not go with a Proxxon IB/E
[16:01:02] <MattyMatt2> I'd look very silly if I welded my lathe together to save money on drill bits :)
[16:01:44] <MattyMatt2> proxxon is outa my range
[16:03:05] <MattyMatt2> Id just buy a MF70 for nozzle drilling and tiny milling if I had the cash
[16:04:06] <MattyMatt2> then I'd CNC it :)
[16:04:17] <MattyMatt2> nema17 steppers
[16:05:30] <MattyMatt2> with a geared one as the 4th axis
[16:05:46] <MattyMatt2> that'd be a better mill than my homemade wooden one
[16:06:57] <MattyMatt2> in every way except size
[16:09:42] <Jymmm> "Size does matter", That's what she said anyway.
[16:12:36] <MattyMatt2> mine isn't quite big enough to do a guitar body. that's a minor bummer
[16:14:09] <MattyMatt2> but that'd be an expensive hobby unless I get the knack of making valuable ones straight away
[16:16:27] <MattyMatt2> I'll stick to my business of making wooden versions of things that usually made in plastic
[16:17:29] <MattyMatt2> "advanced biopolymer composite" aka plywood
[16:18:00] <Jymmm> Wooden DVD's ?
[16:18:16] <MattyMatt2> DVD players would have a market
[16:18:42] <MattyMatt2> nice mahogany or teak front in the living room
[16:20:06] <MattyMatt2> with vintage LCD TVs
[16:20:32] <Jymmm> wooden bandaids?
[16:20:37] <MattyMatt2> with a fresnel on the front to make them look curved :)
[16:21:28] <Jymmm> wooden fresnel ?
[16:21:40] <MattyMatt2> now you're being silly
[16:22:12] <Jymmm> You're the one that said it, I'm only giving examples.
[16:23:04] <MattyMatt2> wooden keyboards I'm up for
[16:23:39] <Jymmm> already been done http://technabob.com/blog/wp-content/uploads/2007/06/wood_keyboard.jpg
[16:24:07] <MattyMatt2> I don't care, as long as the market isn't saturated
[16:24:20] <mrsun> awallin, hmm you have no documentation of how to use these libs do you ? :)
[16:24:46] <Jymmm> mrsun: Use the Source Luke!
[16:24:51] <mrsun> hehe =)
[16:24:59] <awallin> mrsun: not much. since nobody uses them. Not sure if that is cause or effect..
[16:25:02] <mrsun> almost always something to come with do you ? :P
[16:25:10] <mrsun> awallin, hehe =)
[16:25:55] <MattyMatt2> the 2nd user should write the docs, the author is too close to it
[16:26:05] <Jymmm> anyone know how to cut 1/8" and 1/4" cork sheet cleanly by chance?
[16:26:19] <MattyMatt2> without a waterjet?
[16:26:31] <Jymmm> w/o a waterjey
[16:26:33] <Jymmm> t
[16:27:03] <MattyMatt2> sharp wet xacto I think
[16:27:21] <MattyMatt2> and care not to drag and tear
[16:27:33] <Jymmm> It sorta kinda works, but rips a little still
[16:27:49] <MattyMatt2> maybe detergent too?
[16:28:00] <syyl> straight cuts?
[16:28:06] <Jymmm> yes
[16:28:35] <MattyMatt2> a paper guillotine would do it
[16:29:10] <syyl> clamp it down with a straightedge on a wooden board
[16:29:27] <syyl> and cut with an xacto knive
[16:29:32] <syyl> no chance to rip
[16:29:50] <Jymmm> it still seems to tear a bit, nothing like the factory edge.
[16:30:14] <syyl> otherwise go for a big sheetmetal shear ;)
[16:31:06] -!- tom3p [[email protected]] has joined #linuxcnc
[16:32:02] <Jymmm> I'll have to try a rotary cutter and see if that make a difference.
[16:32:11] <syyl> round blade?
[16:32:18] <syyl> good idea
[16:32:46] <jdhnc> yag?
[16:33:01] <Jymmm> co2
[16:33:08] <MattyMatt2> will scorch the edges
[16:33:47] <tom3p> joe9 there's 2 tools for sensitive drilling, the unit you found at McMaster and the Westhoff.
[16:33:48] <tom3p> The Westhoff allows much deeper small hole drilling , its like a manual gundrill
[16:33:55] <MattyMatt2> maybe less than wood tho, as cork is such a good insulator
[16:37:45] <mrsun> awallin, theres one thing with the text engraving tho, the straight lines should imo have another carve line that cuts them straight
[16:37:57] <mrsun> else you get strange Vs down in T joints etc
[16:38:35] -!- nots has quit [Ping timeout: 265 seconds]
[16:39:05] <awallin> maybe... do you have a pic that shows this? the current algorithm is a medial-axis, and afaik from a geometrical point of view correct.
[16:40:19] <mrsun> hmm might be correct, just a feeling i had =)
[16:40:45] <mrsun> http://www.vectric.com/WebSite/Vectric/vcp/images/vcarve_letter_t_animated.gif <-- looking at that it looks just like your paths
[16:41:00] <mrsun> might be the fact that it assumes 90 degree V bit that makes my lettering a bit strange =)
[16:42:37] -!- sir-h0ax [[email protected]] has joined #linuxcnc
[16:44:04] sir-h0ax is now known as sirHOAX
[16:44:26] <mrsun> awallin, but there was no way to set the actual tool for the stuff or? as not all V bits are 90 degrees :P
[16:45:22] -!- nots [[email protected]] has joined #linuxcnc
[16:47:06] <MattyMatt2> I got a 90, a 60 and a 45 in my set
[16:47:26] <mrsun> only got a 60 atm myself :(
[16:50:06] <awallin> mrsun: I pointed out the two lines with z-coords in ttt2medial.py earlier. just multiply with whatever you want there.
[16:50:31] <mrsun> awallin, yes but that only plunges the cutter deeper, does it take into acount that its not 90 degrees? :P
[16:50:49] <awallin> if the opening-angle is 60deg I would guess you need to push it deeper into the stock to make the same width-of-cut as with a 90deg cutter
[16:51:17] <awallin> what else would you want it to do as a function of cutter-angle?
[16:51:37] <mrsun> hmm might be true =)
[16:52:04] <mrsun> so realy what i need to do is to calculate how many times further down the point would have to be to get the same width as a 90 degree
[16:53:24] <jdhnc> does it do overlap for areas that are wider than tool width at that depth?
[16:53:39] -!- nots has quit [Ping timeout: 240 seconds]
[16:53:56] <mrsun> 1.224 would be the factor then i guess =)
[16:53:56] <awallin> jdhnc: no we assume the cone has required width
[16:54:30] <awallin> mrsun: z = r / tan(alfa) where r is the correct depth for 90deg cutter and alfa is the cutter half-angle. maybe.
[16:55:18] -!- ve7it [[email protected]] has joined #linuxcnc
[16:55:22] -!- nots [[email protected]] has joined #linuxcnc
[16:57:54] <mrsun> awallin, calculated the C side length of a triangle at 45 degree half angle, A side 5mm and same with a 30 degree half angle and came up with the 1.224 factor =)
[16:58:53] <mrsun> gonna try it =)
[17:01:19] <awallin> I'm voting for 1/tan(30) = 1.732
[17:03:49] -!- nots has quit [Ping timeout: 248 seconds]
[17:04:24] <pcw_home> Sorry the K street lobbyists will only accept 1/tan(30) = 2
[17:06:48] <awallin> pcw_home: that must be an inch/metric thingy then... :)
[17:06:55] <mikegg> the tax man keeps .268 ?
[17:08:15] <awallin> mrsun: have to run. post some pics if you get something cut!
[17:13:40] <MattyMatt2> I plan to set up a traditional drawing board, but I want encoder on the ruler, back projection, and a drawing tablet built in
[17:14:31] <mrsun_> awallin, ye seems that that didnt cut deep enough that i used, and i dont know if the bit is actualy 60 degree either, it can be 55 or whatever
[17:14:43] <mrsun_> do not find any means of measuring it with either :(
[17:15:37] <mrsun_> http://i43.tinypic.com/23ur6na.jpg
[17:15:39] <mrsun_> awallin,
[17:16:07] <MattyMatt2> take a close up pic of the tool :)
[17:16:57] -!- nots [[email protected]] has joined #linuxcnc
[17:18:04] <MattyMatt2> or plunge cut a hole and measure the width
[17:18:23] <archivist> and depth
[17:19:46] <archivist> with a vernier one could measure the length and width without cutting
[17:20:21] <jdhnc> I tried that with one of mine, could never find a definite palace to measure from
[17:20:51] <MattyMatt2> my V bits are half a cone
[17:21:03] <jdhnc> mine too
[17:21:32] <MattyMatt2> I can't tell if they are exactly half a cone, and could cut both ways
[17:21:35] <archivist> I cheat and use a measuring microscope
[17:23:37] <MattyMatt2> I'm tempted to turn my old microscope into one, but I'd rather use one of those webcam types
[17:24:10] <jdhnc> we have a bunch of 'dino-cams' we use for press tooling inspection
[17:25:15] <MattyMatt2> any webcam can focus pretty close if the lens screws out
[17:25:46] <archivist> I got lucky and found an angle measuring eyepiece
[17:28:04] -!- nots has quit [Ping timeout: 246 seconds]
[17:32:23] <mrsun_> http://i44.tinypic.com/1z70zrr.jpg thats how it looks, now what do i do with it? :P=
[17:32:30] <mrsun_> bad pic tho =)
[17:32:33] <tom3p> i've used centering scopes that mount in spindles, but here's a projector, like a tiny shadowgraph http://www.practicalmachinist.com/vb/schaublin-cazeneuve-weiler-graziano-mori-seiki-lathes/isoma-scopes-146339/
[17:33:05] <mrsun_> awallin, http://i42.tinypic.com/21abtoo.jpg thats with the 1/tan(30) ... looks quite good, but the little dots by the left bottom of Z, wth is that? :/
[17:33:21] <mrsun_> insted of taking the cut from the ouside, it goes from the inside 0Z down to that point
[17:33:46] <mrsun_> imo it should go from either outside cutting down into the Z or from lower in the Z cutting out to the top of that point
[17:36:06] <danimal_laptop> JT-Shop: no dice with the new tip
[17:37:27] <danimal_laptop> i did notice a short between the electrode and the tip. is that supposed to be like that? i thought the tip was connected to the pilot, wich was in the same circuit as the grounding clamp
[17:37:53] -!- m42 [m42!~M_42@unaffiliated/m42] has joined #linuxcnc
[17:38:11] <ssi_> I found a hardinge HNC to buy! Now I just gotta figure out how to get it home :P
[17:38:14] ssi_ is now known as ssi
[17:38:19] <danimal_laptop> sweet!
[17:38:27] <danimal_laptop> great little lathe i love mine
[17:38:28] <ssi> it's a thousand miles from me
[17:38:39] <JT-Shop> ship it
[17:38:40] <danimal_laptop> LOL yea thats a bit of a haul
[17:38:42] <ssi> yeah I've been looking wistfully at them ever since you sold me on it
[17:38:43] <ssi> heheh
[17:39:00] <ssi> my only concern about trying to freight it is the guy that has it can't load it
[17:39:11] <JT-Shop> http://www.plasma-cutter.com/technical.htm
[17:39:19] <ssi> I'm not sure what'd cost to have a trucker load it and freight it
[17:39:27] <ssi> getting into teh territory of rigging, and that shit aint cheap
[17:39:43] <jdhnc> rent a truck, go pick it up.
[17:39:48] <JT-Shop> truckers can't load usually, you would need to find a rigger
[17:39:53] <ssi> have access to a truck and trailer
[17:39:57] <JT-Shop> danimal_laptop: how heavy is the HNC?
[17:39:58] <ssi> just need to figure out logistics
[17:40:05] <mrsun_> why is it that 1/tan(30) on for example google, or python functions does not produce the same result as my calculator ? :)
[17:40:08] <ssi> the machine is like 2500lb, the control another 750
[17:40:17] <jdhnc> mrsun: rads vs. degrees?
[17:40:17] <danimal_laptop> yep, what he said
[17:40:17] <ssi> mrsun_: degrees vs radians?
[17:40:28] <mrsun_> ahh might be
[17:40:30] <JT-Shop> you can drag that onto your trailer with a couple of comealongs
[17:40:43] <ssi> the guy with it said he sold another one a month ago and that's how they did it
[17:40:49] <danimal_laptop> i can push my machine around by hand on the floor
[17:41:03] <danimal_laptop> ssi, flat bed tow truck.
[17:41:11] -!- nots [[email protected]] has joined #linuxcnc
[17:41:15] <ssi> that'd be nice, but probably prohibitive
[17:41:17] <ssi> that's how I moved my mill
[17:41:27] <danimal_laptop> its going to cost more than the machine to move it
[17:41:30] <danimal_laptop> no matter what
[17:41:31] <ssi> oh I'm sure it will
[17:41:38] <ssi> just trying to control how many times more :)
[17:41:46] <danimal_laptop> lol
[17:42:00] <danimal_laptop> pull the servo amps out and ditch the control
[17:42:08] <danimal_laptop> you dont need any of it
[17:42:09] <ssi> the amps are in the control?
[17:42:16] <danimal_laptop> that'll save you 750lbs
[17:42:18] <danimal_laptop> yes
[17:42:21] <danimal_laptop> on the door
[17:42:29] <ssi> I'm not concerned about the control tbh... the truck we have has a liftgate
[17:42:29] <danimal_laptop> 2 GE hiak amps
[17:42:32] <ssi> can put the control in the bed easily
[17:42:44] <danimal_laptop> not worth the hassle lol
[17:42:48] <ssi> what's the footprint dimensions of the machine?
[17:42:56] <danimal_laptop> hold on ill check
[17:42:59] <ssi> htx :D
[17:43:01] <ssi> thx even
[17:44:14] <danimal_laptop> about 6 feet long
[17:44:19] <danimal_laptop> 3.5 feet wide
[17:44:24] <danimal_laptop> 68" tall
[17:44:36] <danimal_laptop> fits in the bed of a pickup
[17:44:53] <ssi> most of the weight toward the headstock end?
[17:45:15] <danimal_laptop> i moved mine in a small penske box truck with a lift gate
[17:45:21] <danimal_laptop> yes
[17:45:25] <ssi> lift gate lifted it ok?
[17:45:34] <danimal_laptop> it was a little sketchy
[17:45:39] <danimal_laptop> but it worked
[17:45:44] <ssi> hrm
[17:46:14] <ssi> that truck probably has a stronger gate than our truck
[17:46:18] <danimal_laptop> i got the smallest one with a lift gate
[17:46:19] <ssi> but taht'd be amazing if it were doable
[17:46:34] <danimal_laptop> it was a 2000lb capacity lift gate
[17:47:06] <ssi> that'd be pretty amazing... way easier than dealing with a trailer
[17:47:23] <MattyMatt2> the exact figure is important if you're renting, for insurance purposes
[17:47:40] <ssi> nah I'm trying to avoid renting :)
[17:48:41] <danimal_laptop> you can probably always help it some with a jack
[17:49:07] <ssi> yeah
[17:49:18] <ssi> then the only other concern becomes how unhappy will a 3/4 ton truck be with 2500lb in the bed
[17:49:41] <mrsun_> awallin, strange looking at the gcode backplot from emc that thing i was talking about looks like it behaves as it should
[17:50:11] -!- phantoxe has quit []
[17:50:33] <danimal_laptop> ssi: very, but i moved more with a ford ranger lol
[17:50:37] <mrsun_> hmm or not
[17:50:37] <mrsun_> sigh
[17:50:41] <danimal_laptop> not 1000 miles
[17:51:04] <ssi> hehehe
[17:51:16] <ssi> so for reference, a penske truck is about $1400 one way
[17:51:22] <ssi> none of these show liftgates, but I'm sure one can be had
[17:51:23] <mrsun_> might be something with the font maybe
[17:51:46] <ssi> not counting the plane tickets
[17:51:58] <ssi> can do it with our truck for $500 in fuel
[17:52:50] <mikegg> ssi: where is it?
[17:53:04] <ssi> CT
[17:53:10] <ssi> DONT SNIPE IT FROM ME BRO :D
[17:53:16] <mikegg> hah
[17:53:42] <danimal_laptop> rent a trailer
[17:53:45] <ssi> have a trailer
[17:53:49] <mikegg> I'll never leave my South Bend !
[17:54:04] <ssi> ah, you're a lathe monogamist
[17:54:06] <danimal_laptop> use that, it's safer than moving it in the bed
[17:54:14] <ssi> yeah, you're right
[17:54:18] <danimal_laptop> and more legal
[17:54:29] <MattyMatt2> attach the trailer wheels and bar to the lathe
[17:54:30] <danimal_laptop> highway patrol and mess with you
[17:54:38] <danimal_laptop> haha MattyMatt2
[17:54:46] <danimal_laptop> good idea
[17:54:47] <ssi> get some good heavy duty casters
[17:54:50] <ssi> and a tow strap
[17:54:52] <mikegg> I bought mine in SC. Broke it down in to as many pieces as possible and put it on a single axle trailer
[17:55:17] <ssi> biggest thing I've moved is my 9x42 mill.. used a rollback for that, and only had to move it 50 miles
[17:55:18] <JT-Shop> http://gnipsel.com/shop/hardinge/hardinge-gallery.xhtml
[17:55:28] -!- tom3p has quit [Quit: Ex-Chat]
[17:55:28] <ssi> moved a reid 2C surface grinder from mobile to atlanta, and that was interesting
[17:55:31] <ssi> but that sucker is top heavy
[17:55:36] <danimal_laptop> ssi, take my advice on the cabinet, there is nothing worth anything in there except for the amps
[17:55:42] <ssi> ok
[17:55:47] <ssi> guy said I could leave it with him
[17:55:51] <archivist> dont leave a southbend just become polygamous
[17:56:08] <JT-Shop> about 5k with all the crap that was inside
[17:56:14] <ssi> CHNC is a little fancier
[17:56:18] <danimal_laptop> ssi: all the good stuff is in the side cabinets on the lathe
[17:56:19] -!- m42 has quit [Quit: m42]
[17:56:41] <ssi> good stuff being what... the spindle drive, coolant pump drive, etc?
[17:56:49] <danimal_laptop> i have the manuals for my lathe, it's 2500 lbs
[17:56:59] <danimal_laptop> no spindle drive, it's mechanical
[17:57:11] <ssi> oh right it's got that two clutch two speed thing
[17:57:22] <danimal_laptop> i mean solid state relays and even the servo power supply i believe
[17:57:33] <danimal_laptop> should be in the right side cabinet on the lathe
[17:57:33] <ssi> gotcha
[17:57:48] <ssi> guy says its in working condition
[17:57:55] <mikegg> I wonder what kind of TIR this would hold: http://www.ebay.com/itm/110723601666?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1233wt_1164
[17:57:57] <ssi> he had four of them and had them in production
[17:58:05] -!- m42 [m42!~M_42@unaffiliated/m42] has joined #linuxcnc
[17:58:29] <danimal_laptop> they're all solid core wire inside for the most part
[17:58:36] <danimal_laptop> mine had a bunch of broken wires
[17:58:47] <ssi> yikes who thought that was a good idea
[17:58:51] <danimal_laptop> GE
[17:58:59] <danimal_laptop> is it a ge control?
[17:59:07] <ssi> yeah
[17:59:13] <ssi> GE 550T
[17:59:17] <danimal_laptop> giant one, like 7 feet tall?
[17:59:20] <danimal_laptop> yea
[17:59:32] <danimal_laptop> does it have a u-stor on it?
[17:59:40] <ssi> I don't know what you mean
[17:59:45] <danimal_laptop> memory thing on the front
[17:59:50] <ssi> oh, yes it does
[18:00:03] <danimal_laptop> keep that, i sold mine for like $100
[18:00:06] <ssi> haha ok
[18:00:11] <danimal_laptop> gas money lol
[18:00:13] <ssi> so basically just keep the door, eh
[18:00:29] <danimal_laptop> just pull the amps off, they're pretty easy to get to
[18:00:31] <ssi> honestly, if we're gonna trailer the machine home, it's trivial to liftgate the control into the bed and strap it
[18:00:53] -!- IchGuckLive [[email protected]] has joined #linuxcnc
[18:00:58] <danimal_laptop> 750lbs extra might hurt your gas mileage and transmission life
[18:01:01] <IchGuckLive> hi all around the globe
[18:01:05] <ssi> praps!
[18:01:06] <danimal_laptop> hi
[18:01:10] <ssi> did you use the resolvers?
[18:01:13] <danimal_laptop> yes
[18:01:17] <danimal_laptop> they work good
[18:01:25] <danimal_laptop> i put an encoder on the spindle though
[18:01:34] <ssi> mesa?
[18:01:48] <danimal_laptop> its hard to put encoders on the axis because of the tach and all that crap
[18:01:58] <danimal_laptop> no, pico, it was before mesa had them
[18:02:10] <ssi> I mean for teh interface, not the encoder sry
[18:02:43] <danimal_laptop> ah, yes
[18:02:45] <ssi> just curious what you have to do for the resolvers
[18:02:50] <ssi> is there some sort of converter?
[18:03:02] <danimal_laptop> yea the pico boards, thats what i meant
[18:03:06] <ssi> ohh ok
[18:03:15] <ssi> http://pico-systems.com/resolver.html
[18:03:16] <danimal_laptop> mesa has some now though
[18:03:16] <ssi> that?
[18:03:19] <danimal_laptop> yes
[18:03:31] <danimal_laptop> cradek uses the pico boards too
[18:03:41] <ssi> that's a good reason to use them
[18:03:49] <ssi> the two of you will be a wealth of knowledge :D
[18:04:07] <danimal_laptop> we both got ours befre mesa made them though. i would have gone mesa if he had them
[18:04:13] <danimal_laptop> mainly for the support
[18:04:20] <ssi> gotcha
[18:04:22] <danimal_laptop> and i think mesa is cheaper
[18:04:36] <ssi> I'm using a mesa interface on my little g0602, been very happy with their stuff so far
[18:05:00] <ssi> but I don't really know anything about servo systems or resolvers, so it'll be an adventure
[18:05:00] <danimal_laptop> yea, i've built 3.5 machines so far with the mesa stuff. still have to finish the .5
[18:05:19] <danimal_laptop> good lathe to start on, it wasnt too hard.
[18:05:37] <danimal_laptop> the biggest pain was the tool turret
[18:05:38] -!- nots has quit [Ping timeout: 252 seconds]
[18:05:43] <ssi> so what encoder did you use on the spindle?
[18:05:57] <danimal_laptop> just a cheapie
[18:06:02] <danimal_laptop> i dont know
[18:06:20] <ssi> I scratchbuilt one for my 602:
[18:06:20] <ssi> http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/205204_655375525742_71107655_34534452_5631970_n.jpg
[18:06:25] <ssi> works surprisingly well :D
[18:06:32] -!- syyl_ws [[email protected]] has joined #linuxcnc
[18:06:39] <danimal_laptop> if you use the mesa resolver card, i believe you'll have enough channels to use the resolver on the spindle as well
[18:06:54] <ssi> the mesa one supports six resolvers
[18:06:58] <danimal_laptop> i only went encoder because the pico boards are way more expensive than a cheap encoder
[18:07:32] <danimal_laptop> nice encoder!
[18:07:36] <ssi> thx :D
[18:07:52] <ssi> I used my scratchbuilt cnc plasma table to cut the disk
[18:08:00] <ssi> I have this huge bootstrapping problem
[18:08:07] <ssi> need machines to build machines
[18:08:08] <IchGuckLive> danimal_laptop: tol turret on Arduino Hal command ?
[18:08:24] <cncbasher> anyone good with solidworks ? taking a 2d dxf to 3d
[18:08:42] <danimal_laptop> IchGuckLive: classicladder
[18:08:46] <danimal_laptop> brb
[18:08:54] <JT-Shop> another perfect thread brought to you by the E.M.C.
[18:09:25] <IchGuckLive> cncbasher: use heekscad its free
[18:09:30] <ssi> JT-Shop: :D
[18:09:38] <ssi> I've got my threading down pat on my g0602
[18:09:47] <JT-Shop> cncbasher: you basically have to draw the solids from your dxf prints
[18:09:48] <archivist> cncbasher, since using solidworks /me has never touched another dxf, so cannot help at the moment
[18:10:13] <ssi> my boss asked me to make him a desk toy, so I made him a captured nut widget
[18:10:21] <IchGuckLive> JT-Shop: heekscad can extrude dxf sketches
[18:10:28] <ssi> http://sphotos.xx.fbcdn.net/hphotos-ash4/417616_799707338632_71107655_35427711_928588899_n.jpg
[18:10:37] <JT-Shop> cncbasher: unless it is really a 2.5 D part and you can extrude it
[18:10:57] <IchGuckLive> also pycam can do this in basic way
[18:11:16] <cncbasher> trying to join the sketches .. and they wont
[18:11:50] <IchGuckLive> cncbasher: can you upload the dxf ?
[18:11:59] <JT-Shop> that don't sound right "join the sketches"
[18:12:10] <archivist> ssi, well hidden join somewhere :)
[18:12:20] <IchGuckLive> i think he will extrude from one sketch to the other
[18:12:21] <ssi> yep :D
[18:12:49] <ssi> it's 3/8-20 in the center, and 5/8-11 outer thread
[18:12:53] <mikegg> i was going to guess witchcraft
[18:12:57] <ssi> SORCERY
[18:13:06] <archivist> ssi, I must make another box joint set of pliers
[18:13:08] -!- nots [[email protected]] has joined #linuxcnc
[18:13:39] <ssi> eh?
[18:14:12] <archivist> "impossible to take apart" as put together hot and forged
[18:14:19] <ssi> I see
[18:14:36] <ssi> this one can be taken apart if you really wanted to... I didn't threadlock it or anything
[18:14:46] <ssi> but I did use knipex pliers to put it together, and then machined the ends
[18:14:56] <ssi> and as slick as they are, you'd have to use vise grips or something to disassemble it
[18:16:17] <ssi> so I got fed up with sucking at threads, and I wrote an iphone app that takes a thread and spits out tolerance ranges and infeed data, both straight and compound, both full-form and sharp-V
[18:16:24] <ssi> and now I get my numbers right the first time every time :)
[18:16:40] <JT-Shop> neat, I just guess
[18:16:52] <ssi> yeah guessing wasn't working great for me :D
[18:16:59] <archivist> ssi http://www.jewelerssupplies.com/product5523.html
[18:17:01] <ssi> I also got some wires and actually measure PDs
[18:17:14] <JT-Shop> does the app work on any iphone?
[18:17:19] <ssi> yeah
[18:17:26] <ssi> but I haven't submitted it or anything yet
[18:17:43] <ssi> I can get it submitted if you're interested in it
[18:17:55] <JT-Shop> yea, that would be neat
[18:18:05] <mikegg> I'd be interested too
[18:18:06] <ssi> it only does UN threads right now
[18:18:10] <JT-Shop> do you need a mak to write an app for an iphone?
[18:18:16] <ssi> yeah, more or less
[18:18:29] <JT-Shop> that leaves me out then
[18:19:12] <ssi> what I'll probably do is put this app on the store for money
[18:19:14] <ssi> two bucks or so
[18:19:15] <JT-Shop> ssi: that would be so cool to have thread data on your phone
[18:19:18] <ssi> and then give you guys redeem codes
[18:19:30] <ssi> lord knows you guys have helped me out enough :)
[18:19:40] <JT-Shop> cool, no marathon ads then
[18:19:45] <ssi> haha no, no ads
[18:19:51] <ssi> I hate ads in apps
[18:19:55] <JT-Shop> me too
[18:20:18] <JT-Shop> I delete them pretty fast when I figure that it is an ad monster
[18:20:26] <ssi> the only reason I haven't put it on the store as yet is that I wanted to get metric written first
[18:20:34] <ssi> but I haven't had time
[18:20:50] <ssi> btw the rules for how you calculate tolerances on UN threads are freakin insane
[18:21:02] <ssi> extremely complicated
[18:23:03] <danimal_laptop> gunna make it for android? lol
[18:23:25] <ssi> wasn't planning on it, but maybe I will :)
[18:23:34] <ssi> I've never done any android work
[18:24:17] <mrsun_> http://i44.tinypic.com/1ze9q88.jpg yey best so far =)
[18:24:40] <ssi> nice :D
[18:24:55] <ssi> someone needs to come motivate me into finishing my mill conversion :(
[18:28:11] <joe9> tom3p: thanks.
[18:28:43] <Cylly> re @ home.
[18:30:07] Cylly is now known as Loetmichel
[18:39:00] <mrsun> now if there was only a program written around awallins work it would be so great =)
[18:39:04] <mrsun> hes doing amazing work
[18:39:11] <ssi> what sort of work?
[18:39:15] <JT-Shop> cncbasher: if you want to send me the files I can take a look at them
[18:39:28] <mrsun> ssi, he is writing opencamlib, openvoronoi and stuff
[18:39:40] <ssi> I see
[18:39:44] -!- acemi [acemi!~acemi@unaffiliated/acemi] has joined #linuxcnc
[18:39:44] <mrsun> his stuff that generated the toolpaths for that
[18:39:50] <ssi> I still havent gotten a firm grasp on lathe cam yet
[18:40:39] -!- _abc_ [_abc_!~user@unaffiliated/ccbbaa] has joined #linuxcnc
[18:41:31] <_abc_> Does anyone know where I can buy small diameter carbon steel rod, ready to be made into specialized mill bits?
[18:41:44] <Spida> whats small?
[18:42:32] <pcw_home> That openvoronoi stuff looks really neat. I thought that that vcarved text might have been created with it
[18:45:55] <danimal_laptop> JT-Shop: figured out my high frequency circuit isnt working on the plasma
[18:48:17] <jthornton> can you fix it Dan?
[18:48:45] <danimal_laptop> i dont know
[18:48:47] <danimal_laptop> hope so
[18:48:58] <danimal_laptop> not exactly sure how they work
[18:51:04] <jthornton> I'm real sure that I don't know how they work :)
[18:53:29] <pcw_home> I think most are a glorified spark ignition system
[18:53:47] <danimal_laptop> thats what i thought
[18:54:07] <danimal_laptop> should i just replace it with an automotive coil? lol
[18:55:02] <danimal_laptop> wonder if that will work. it's just for the pilot
[18:55:09] <pcw_home> Theres a little more involved but all of the pieces should be replaceable
[18:55:10] <danimal_laptop> so it's momentary
[18:55:33] <danimal_laptop> pcw_home: it's an old plasma, there's not even any info online about it.
[18:56:07] <pcw_home> hers a home made one: http://www.casano.com/projects/hfstart/index.html
[18:57:11] -!- m42 has quit [Quit: m42]
[18:57:54] -!- syyl_ws has quit [Quit: Verlassend]
[18:58:45] <pcw_home> can you take a picture of the existing one?
[18:59:29] <pcw_home> probably easiest to fix what you already have
[18:59:30] <A2Sheds> danimal_laptop, how's the new updated shop going?
[18:59:45] <danimal_laptop> pcw_home: i can try
[18:59:52] <danimal_laptop> A2Sheds: no progress lol
[18:59:55] <danimal_laptop> been busy
[19:00:06] <A2Sheds> same here
[19:00:14] <danimal_laptop> brb lemme see if i can grab some pics
[19:01:50] <danimal_laptop> ok got pics
[19:01:53] <danimal_laptop> uploading now
[19:02:44] -!- theorbtwo [[email protected]] has joined #linuxcnc
[19:06:12] <danimal_laptop> pcw_home: http://www.flickr.com/photos/66828621@N02/sets/72157629468486855/
[19:06:54] <danimal_laptop> has voltage, i think the spark gap thing is possibly the culprit?
[19:10:42] <danimal_laptop> there's ac voltage between the 2 terminals on the spark gap block
[19:11:10] <danimal_laptop> but it's not buzzing like it should
[19:18:29] <jdhnc> what happens when you touch both of them?
[19:18:41] <danimal_laptop> my hair stands up
[19:18:48] <jdhnc> mpegs?
[19:20:43] <danimal_laptop> lol
[19:21:14] <danimal_laptop> the ceramic rings on it were cracked, not sure if that matters
[19:21:46] <pcw_home> If the spark gap distance is wrong that may be the problem
[19:23:06] <pcw_home> be very careful, the voltage across the spark gap is supposed to be many 1000s of volts (dont try to measure with VOM)
[19:23:26] <jdhnc> we have some welders that use cut-off spark plugs for arc starting
[19:23:49] <danimal_laptop> yea not messing with it with it pluged in lol
[19:24:27] <pcw_home> does the high voltage transformer (second photo split bobbin transformer) have primary (110,220v) power ?
[19:24:50] -!- phantoxe [[email protected]] has joined #linuxcnc
[19:25:20] <pcw_home> maybe the control logic is not turning it on
[19:25:56] <danimal_laptop> not sure, i thought so since there's voltage at the electrode.
[19:26:04] <danimal_laptop> i can go check
[19:26:46] -!- _abc_ has quit [Quit: Lost terminal]
[19:28:55] <pcw_home> Dont do the neutron dance...
[19:29:28] <danimal_laptop> lol
[19:31:40] <pcw_home> I would guess that something in the control is supposed to turn on the HF start circuit if the torch is on but theres no plasma current
[19:32:38] -!- GoSebGo has quit [Quit: Bye]
[19:33:11] -!- GoSebGo [[email protected]] has joined #linuxcnc
[19:35:51] <danimal_laptop> there's current at the electrode
[19:36:44] <ssi> danimal_laptop: you doing a cnc table?
[19:40:01] <danimal_laptop> na
[19:40:24] -!- Gast264 [[email protected]] has joined #linuxcnc
[19:40:25] <danimal_laptop> i epoxied the ceramic rings back together so i can reassemble it. time for lunch while it cures
[19:40:41] <danimal_laptop> be back in a bit! thanks for the guidance so far
[19:41:20] <ssi> the HF start on my tig welder sometimes causes my lathe spindle to start D:
[19:42:08] <Gast264> hallo everybody, have a question concerning parport connection
[19:43:29] <Gast264> parport0 claim failed emc2
[19:43:59] <Gast264> we have this error: parport0 claim failed emc2
[19:44:59] <danimal_laptop> lol
[19:51:09] -!- pingufan has quit [Quit: Konversation terminated!]
[19:52:29] -!- psha has quit [Quit: Lost terminal]
[19:58:20] <Gast264> other driver is using parport0
[19:58:31] <Gast264> how to switch it off?
[19:59:26] <jdhnc> what is using it?
[19:59:59] <jdhnc> rmmod lp;rmmod parport;rmmod parport_pc ?
[20:02:19] <Gast264> ok, we solved that, many thanks for the hint!
[20:03:12] <jdhnc> better solution is find out where/why lp loaded and get rid of it.
[20:11:30] -!- PCW [[email protected]] has joined #linuxcnc
[20:16:34] -!- vladimirek [[email protected]] has joined #linuxcnc
[20:21:08] <Gast264> we solved it, 3 axis running on emc2!!! yeah
[20:22:05] <joe9> jdhnc: you are correct. the drill press issue does not seem to be not the chuck or the arbor. It seems to the runout from the spindle/quill (0.002inches), which is getting magnified when the chuck is on it.
[20:22:23] <joe9> with the new smaller chuck and arbor, the runout is still 0.01 inches.
[20:24:28] <joe9> does anyone have any thoughts on changing the spindle bearing of a drill press. Is it a big deal? Unlike the machine-gods here, can a mere noob mortal like me do it?
[20:25:17] <mikegg> are you sure it's the bearings?
[20:25:55] <joe9> mikegg: don't know. It is definitely not the arbor. and, most probably not the chuck. as both the old and new chucks have a runout.
[20:26:02] <joe9> what else can it be?
[20:26:11] <mikegg> without an arbor or hydraulic press.....you'll need a big hammer
[20:26:52] <joe9> the manual talks about "bent bit or worn spindle bearings or drill bit not in chuck properly or chuck not properly installed"
[20:27:10] <joe9> I think I have covered all the above except for the spindle bearings.
[20:27:12] <mikegg> if the spindle bearings are worn, you should be able to measure some play
[20:27:35] <joe9> mikegg: at the tip of the spindle/quill, it measures a runout of 0.002 inches.
[20:27:37] <mikegg> put an indicator on it somewhere and see if you can wiggle it by hand?
[20:28:30] <joe9> I tried wiggling it by hand, it was wiggling. but, once I tightened the screw that adjusts the wiggle, it has not wiggled atleast to my touch/feel.
[20:28:44] <joe9> mikegg: that is how I am measuring runout.
[20:29:11] <joe9> put a dial indicator on the quill/spindle, and rotate the top belt-held portion.
[20:29:22] <joe9> I removed the belts to avoid other issues.
[20:29:30] <joe9> mikegg: does that make sense?
[20:29:48] -!- Gast264 has quit [Ping timeout: 244 seconds]
[20:30:03] -!- syyl_ws [[email protected]] has joined #linuxcnc
[20:30:15] <joe9> mikegg: there is a 0.002 inch runout at the quill. But, adding an arbor and chuck, I think, is amplifying that runout.
[20:30:32] <joe9> when I add a transfer punch to the chuck, I can see the wobble with my eyes.
[20:30:44] <joe9> even at the chuck, the runout is 0.010 inches.
[20:30:59] <mikegg> the arbor might not be fully seated?
[20:31:02] <joe9> at the arbor end, the runout is 0.003 inches.
[20:31:37] <mikegg> so between the arbor and two different chucks you are adding .007 runout?
[20:32:02] <joe9> with the arbor, at the arbor end, runout = 0.003 inches.
[20:32:14] <joe9> big chuck runout = 0.015 inches
[20:32:23] <joe9> small chuck runout = 0.010 inches
[20:33:13] <mikegg> seems a little high, but it might just be the chucks
[20:33:15] <joe9> with the new arbor, I did not want to destroy the arbor and hence hand pressed it, ensuring that it was a snug fit. It was tight enough that I could not pull it out with the hand. I had to use a wedge key.
[20:33:29] <joe9> mikegg: the small chuck is a new one.
[20:34:51] -!- skunkKandT [[email protected]] has joined #linuxcnc
[20:34:52] <joe9> i just bought it this morning from Mcmastercarr just to test the whole setup.
[20:38:51] <mikegg> is it an older drill press? my R8 arbors were really sticky. I polished the bore with a dremel and a soft fuzzy wheel. worked wonders
[20:40:32] <jdhnc> sounds like the arbors are fine
[20:40:55] <jdhnc> tried bluing the arbor and checking the arbor/chuck fitup?
[20:42:31] <jdhnc> mt3?
[20:43:26] -!- vladimirek has quit [Remote host closed the connection]
[20:44:14] <joe9> mikegg: it is a central machinery 38142 drill press. I bought it used from a carpenter.
[20:44:38] <joe9> I would not be surprised if he abused it enough and got rid of it when he noticed the spindle/quill was off.
[20:44:49] <joe9> jdhnc: yes, the arbors are fine.
[20:45:36] <joe9> jdhnc: I tried with the old arbor + old chuck and the new arbor + new chuck with similar runout (0.010 inches).
[20:45:52] <joe9> at this point, it might be something else other than the chuck/arbor.
[20:46:38] <IchGuckLive> hi joe9
[20:46:47] <IchGuckLive> how is your mill growing
[20:47:05] <joe9> IchGuckLive: hello. I am working on the drill press. put the mill to hold at the moment for the next few weeks.
[20:47:10] <joe9> IchGuckLive: thanks for asking.
[20:47:25] <IchGuckLive> O.o
[20:49:03] <joe9> jdhnc: "tried bluing the arbor and checking the arbor/chuck fitup?" what is bluing? or, did you mean gluing?
[20:49:22] <joe9> I could not figure out how to check the chuck/arbor runout without attaching to the drillpress.
[20:49:28] <joe9> Is there a way to do that?
[20:49:49] -!- IchGuckLive [[email protected]] has parted #linuxcnc
[20:54:51] <mrsun> hmm, got a svg file that i want carved now, dunno how the heck to do that :P
[20:55:06] <mrsun> the awallin script worked fine for just outputting some text, but i want more ... :P
[20:56:17] <mikegg> with bluing, you would paint the arbor with special compound that rubs off easily. Then insert it into the chuck, pull out it and look at what's left to see if the two parts are mating properly
[20:56:19] <mrsun> realy starting to think about buying something like vcarve pro or something =)
[20:56:57] <mrsun> and use real bluing compound, its non abrasive =)
[20:57:21] <jdhnc> prussian blue in solution
[20:57:30] <mrsun> mm
[20:57:36] <joe9> mikegg: do you think I should do that? given that I have similar readings with different chuck+arbor combo's.
[20:57:38] <jdhnc> get a spray can from mcmaster!
[20:58:02] <jdhnc> mrsun: I bought a copy of cut2d, it is very nice for what it does.
[20:58:06] <mikegg> yeah, that's a good idea - I was waiting for someone more experienced to weigh in on the issue :)
[20:58:29] <mikegg> I don't have any bluing compound - dry erase marker?
[20:58:40] <joe9> jdhnc: mikegg: do you know if homedepot carries that bluing compound?
[20:58:53] <mrsun> cut2d is light version of vcarvepro ? :)
[20:58:57] <joe9> mcmastercarr and harborfreight are an hour's drive for me.
[20:59:15] <joe9> just curious if there is something else that I can get locally.
[20:59:21] <jdhnc> mrsun: it does 2d CAM
[20:59:37] <mrsun> jdhnc, ye just asking cause they had a cut2d to vcarvepro upgrade option :P
[20:59:43] <jdhnc> maybe 2.5d
[21:00:18] <mrsun> vcarvepro is a bit expensive for the limited use i ahve still for it tho
[21:00:33] <mrsun> and one more problem, not a single windows box in my house =)
[21:01:00] <jdhnc> it runs in virtualbox
[21:01:21] <jdhnc> I've heard cut2d works in wine, but didn't try it.
[21:01:42] <mrsun> supposed to do yes, vcarvepro also, but wine is almost always dodgy :/
[21:02:27] <mrsun> only thing that has worked flawlessly for me is World of Warcraft =)
[21:02:44] <jdhnc> I'm sorry.
[21:05:00] <jdhnc> joe9: dry-erase might work, never tried it. Might not tell you anything anyway. If the arbors are true, it's proably just inherent in the chucks. They are not known for precision.
[21:05:32] <joe9> jdhnc: thanks. will check it.
[21:10:38] -!- cncbasher [cncbasher!~quassel@cpc15-hart9-2-0-cust101.11-3.cable.virginmedia.com] has parted #linuxcnc
[21:12:55] <jdhnc> get an X2 and some collets. Then you can CNC it later
[21:13:09] <jdhnc> it will still be an X2, but it will be much coole.
[21:13:12] <jdhnc> or cooler.
[21:13:25] <joe9> jdhnc: was that for me?
[21:13:33] <mrsun> omg for programs that is hardcoded to one freakin size
[21:13:33] <jdhnc> yep
[21:13:49] <joe9> what is X2? a milling machine or drill press or chuck?
[21:13:50] <mrsun> yes linuxcnc, and yes some inkscape plugins
[21:14:03] <joe9> jdhnc: i want to get to cnc at some point.
[21:14:13] <joe9> and your suggestion is right up the alley
[21:14:14] <jdhnc> joe9: small seig mill, sold by Harbor freight, grizzly, others.
[21:14:37] <jdhnc> I found one on craigslist for $200, still new in grease.
[21:14:53] <joe9> jdhnc: really, good to know. thanks. will check it.
[21:15:05] <joe9> HF has it for $500.
[21:15:08] <jdhnc> but, I've searched craigslist every day for 3 years before I found it :)
[21:15:41] <jdhnc> afaik, they don't stock them in stores anymore, you have to order them.
[21:16:50] <joe9> haha..
[21:18:22] -!- m42 [m42!~M_42@unaffiliated/m42] has joined #linuxcnc
[21:18:41] <mrsun> i dont get it wy there is so freakin many gcode generating programs for windows but like none of any quality for linux :/
[21:22:00] <jdhnc> s/gcode generating //
[21:22:46] <mrsun> dont know the quality of the windows programs but hell, all i want is a V carve program for linux :(
[21:22:53] <mrsun> and a 3d milling program
[21:22:56] <mrsun> etc :P
[21:29:25] <joe9> if i am going to change the spindle bearing, are there any other mods that I can do to make the drill-press better?
[21:29:34] <joe9> such as multiple spindle, etc.
[21:31:44] <mikegg> if it has radial contact bearings, try to replace them with angular..
[21:32:06] <mikegg> but that can get complicated
[21:33:44] <jdhnc> It's a $175ish drill press
[21:34:19] -!- m42 has quit [Quit: m42]
[21:34:24] <jdhnc> the bearings won't help the chuck
[21:35:22] <joe9> jdhnc: what do you recommend?
[21:35:42] <jdhnc> not throwing more money at a cheap chinese drill press?
[21:35:51] <jdhnc> unless you have a need for a marginally better chinese drill press.
[21:35:58] <joe9> http://www.youtube.com/watch?v=gWwmgC_TkBQ found this video to replace a drill press spindle.
[21:36:05] <mikegg> hah
[21:36:35] <jdhnc> how much did you pay for it?
[21:37:13] <joe9> jdhnc: $100.
[21:37:32] <joe9> it is a big chunk of steel. I think a little here and there might make it better.
[21:37:38] <joe9> s/steel/metal/
[21:37:41] <joe9> pretty solid.
[21:38:09] <joe9> jdhnc: let me atleast check the spindle bearings. Don't you think that it is a good idea to do that?
[21:38:21] <joe9> jdhnc: everything else seems pretty tight.
[21:38:54] <jdhnc> good bearings will cost more than the drill press.
[21:39:25] <joe9> jdhnc: most of the good machines (milling or drilling) are in the $500 range.
[21:42:26] <jdhnc> for some definition of 'good' :)
[21:46:52] <mikegg> it really depends on what you want to do with it. which is something I routinely overlook. for some projects, chinese is good enough..
[21:47:29] <ssi> nothing wrong with chinese machines... but $500 is pretty low-end
[21:53:13] -!- jstenback has quit [Remote host closed the connection]
[21:53:34] -!- jstenback [jstenback!~jstenback@2620:101:8003:200:224:e8ff:fe39:34c2] has joined #linuxcnc
[21:57:29] <MattyMatt2> joe9, that's more than I paid for mine :) Silverline is almost a synonym for Second Rate
[21:58:21] <MattyMatt2> I got bored with getting sniped on nice old Meddings ones
[22:02:25] <mrsun> hmm inkscape and f-engrave worked together quite niceley ...
[22:08:10] <DJ9DJ> gn8
[22:08:50] -!- DJ9DJ has quit [Quit: bye]
[22:10:12] -!- syyl_ws has quit [Quit: Verlassend]
[22:11:19] <mrsun> hmm in my case when it comes to my drillpress its not the spindle bearings thats moving, its the actual quill hole that is oversized ...
[22:13:31] -!- FinboySlick has quit [Quit: Leaving.]
[22:14:43] -!- GoSebGo has quit [Ping timeout: 246 seconds]
[22:20:17] <MattyMatt2> same here, just been to check mine over
[22:20:38] <MattyMatt2> that vid gives me the confidence to take it apart and shim it
[22:22:10] <MattyMatt2> and fit an encoder while I'm at it
[22:22:22] <joe9> just opened up the spindle and I see same play (runout = 0.002 inches) in the quill that I noticed when it was in the drillpress. I figure it is the bearings at this point.
[22:22:32] <joe9> that is getting amplified when I put the chuck in it.
[22:22:47] -!- acemi has quit [Quit: WeeChat 0.3.2]
[22:23:10] <danimal_laptop> dang it doesnt look like this plasma's gunna work
[22:23:19] <joe9> let me get the bearings out and see how they are
[22:23:38] <MattyMatt2> what is that in ABEC terms? up to ABEC 7 bearings aren't too expensive
[22:24:38] <MattyMatt2> I'd be surprised if you can measure a bare bearing without a long lever to revela the play
[22:28:45] <joe9> i do not know if this is a bad/good thing. when I hit the spindle to remove it with the bearings. The spindle moved out, but the bearings are still in the quill.
[22:29:09] <joe9> I guess that means the bearings are too lose around the spindle,
[22:29:21] <joe9> now, I have to figure out how to get the bearings out of the quill.
[22:30:01] -!- jstenback has quit [Remote host closed the connection]
[22:30:06] <joe9> any suggestions, folks.
[22:30:20] <jdhnc> bearing puller
[22:30:22] <joe9> both the top and bottom bearings are in the hollow quill.
[22:30:30] -!- jstenback [jstenback!~jstenback@2620:101:8003:200:224:e8ff:fe39:34c2] has joined #linuxcnc
[22:30:36] <joe9> jdhnc: ok, thanks.
[22:30:51] <joe9> jdhnc: quick question, does it mean that the bearings are loose?
[22:30:55] <MattyMatt2> was the slop due to the spindle being undersized?
[22:31:17] <MattyMatt2> fit it back in and see if that's the problem
[22:31:37] <jdhnc> they are plain radial ball bearings?
[22:31:49] <joe9> jdhnc: yes, I think so. how can I tell?
[22:32:09] <MattyMatt2> rubber seals?
[22:32:11] <joe9> MattyMatt2: or, the bearings were not binding to the spindle for some other reason.
[22:32:56] <MattyMatt2> should be a close fit with some friction at least
[22:34:15] <MattyMatt2> you can put the spindle in one bearing and use it as a lever to see if the bearings have play
[22:34:35] <joe9> just checked the bearings, they have metal bottom and inside (I cannot see the other sides).
[22:35:02] <joe9> MattyMatt2: I am sure it is a close fit, as I had to hammer the spindle to get it out.
[22:35:18] <joe9> in the video, hammering the spindle removed both the spindle and bearings
[22:35:32] <joe9> whereas, for me, the spindle slipped out. not the bearings with it.
[22:35:35] <MattyMatt2> there should be a number stamped on the metal shield (followed by Z or ZZ to tell you the metal shield is a metal shield ;)
[22:36:25] <jdhnc> maybe a dowel through the opposite end, and gently tap out the bearing
[22:36:42] <MattyMatt2> yep delrin dowel is what I'd use
[22:36:45] <joe9> "ckbe 6204Z"
[22:36:58] <MattyMatt2> sweet, that's a common cheap size
[22:37:35] <MattyMatt2> at least the cheap ones are cheap
[22:37:40] <joe9> on the other end, "pl8 6201z"
[22:37:53] <MattyMatt2> and another
[22:38:14] <MattyMatt2> vxb will sell you replacements of various qualities
[22:38:35] <MattyMatt2> ckbe and pl8 are the manufacturer I think
[22:38:56] <MattyMatt2> 6204 and 6201 are the sizes
[22:39:01] -!- factor has quit [Read error: Connection reset by peer]
[22:39:29] <MattyMatt2> Z is the metal shield, which is optional
[22:39:55] <MattyMatt2> probably best for a drill press, but the RS type are more waterproof if you ever use coolant
[22:40:56] <joe9> the bottom bearing, I can put my finger in it. When I try to move my finger, I detect a slight sideways movement.
[22:41:09] -!- Valen [Valen!~Valen@2001:44b8:3199:9100:21e:8cff:fe63:55df] has joined #linuxcnc
[22:41:23] <MattyMatt2> I'd be tempted to replace the bottom one with a thrust bearing
[22:41:39] <MattyMatt2> taper roller type etc
[22:42:05] <jdhnc> huh?
[22:42:43] -!- factor [factor!~factor@r74-195-184-248.msk1cmtc01.mskgok.ok.dh.suddenlink.net] has joined #linuxcnc
[22:42:59] <MattyMatt2> tempted I say :) I'd think it though and take advice and work out how I'd tighten them
[22:43:22] <joe9> jdhnc: you mentioned a dowel yesterday too. Do you think a "dowel" is a must-have tool? I have the machinist's transfer punch. Is the transfer punch a good alternative?
[22:43:37] <jdhnc> joe9: it's a piece of round wood.
[22:44:01] <jdhnc> so you don't scratch/mar/etc the surfaces.
[22:44:03] <joe9> that i have.
[22:44:11] <joe9> good idea, thanks. will do so.
[22:44:26] <MattyMatt2> I'd use round delrin stock because I have some and it won't splinter
[22:44:35] -!- pfred1 [pfred1!~pfred1@unaffiliated/pfred1] has joined #linuxcnc
[22:45:33] <jdhnc> you can get an angular contact bearing for $104
[22:45:50] <pfred1> I looked all over LinuxCNC's website and I couldn't find links to any tarballs of the source tree
[22:46:37] <jdhnc> pfred1: http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Installing_EMC2#Getting_the_source_with_git
[22:46:44] <pfred1> so then I finally broke down and used that filthy dirty git nonsense
[22:46:49] <jdhnc> heh
[22:47:05] <MattyMatt2> one reason I'd choose angled/tapered needle is you can tighten them like a bike wheel to remove all slop, even if the bearings are cheap
[22:47:17] <pfred1> does anyone even look at that code?
[22:47:31] <jdhnc> I can't see what a thrust bearing would mate against.
[22:48:19] <pfred1> the last news item in the NEWS file is dated 2009.06.13
[22:48:26] <joe9> jdhnc: got the bearings out. the "wooden dowel" was a brilliant idea.
[22:49:13] -!- ewidance [[email protected]] has joined #linuxcnc
[22:49:35] <joe9> now, I need to tell if the bearings are really bad.
[22:49:39] <pfred1> this is what heads the TODO file: "THINGS THAT ARE DESIRABLE FOR THE NEXT MAJOR RELEASE (EMC-2.4)"
[22:49:58] <pfred1> joe9 what color are they?
[22:50:06] <joe9> silver
[22:50:17] <pfred1> are they scored or scratched?
[22:50:53] <pfred1> if no goto grease tub and repack
[22:51:14] <jdhnc> sealed
[22:51:28] <pfred1> then pop the seal
[22:51:42] <pfred1> I never met a bearing seal I couldn't remove
[22:51:52] <joe9> i do not see any scratches, but, I can see a little play when I exert sidewards pressure.
[22:51:56] <joe9> Is that expected?
[22:52:06] <joe9> little play to the side using my fingers.
[22:52:39] <joe9> jdhnc: yes, sealed.
[22:52:40] <pfred1> I think manufactuers seal bearings just so you can't repack them
[22:52:54] <pfred1> just jamb an awl int othe seal it'll pop off
[22:54:07] -!- Fox_Muldr has quit [Ping timeout: 265 seconds]
[22:54:20] <joe9> when I press on the bearing from the top/bottom, I can see that it moves a little.
[22:54:27] <pfred1> I've had to scrape away that black crud they use on the seals to hold them in sometimes too
[22:54:48] <joe9> let me check youtube.com for some instructional videos on checking bearings.
[22:55:10] <pfred1> until you can get down to the balls of the matter there isn't much you can do
[22:55:11] <MattyMatt2> cheap ones are only $1.95 at vxb
[22:55:16] -!- FinboySlick [[email protected]] has joined #linuxcnc
[22:55:44] <pfred1> but if they're not yellow or blue or black and they're not all scored all you need ot do is repack them
[22:55:49] -!- Fox_Muldr [[email protected]] has joined #linuxcnc
[22:55:53] -!- GoSebGo [[email protected]] has joined #linuxcnc
[22:55:55] <MattyMatt2> they only do cheap, stainless or ceramic though, you want good quality steel ones
[22:56:04] <jdhnc> cheap ones are cheap
[22:56:31] <MattyMatt2> I'm presuming in a cheap drill press that's what they are
[22:56:51] <pfred1> heck I took apart a bosch router recently and it had cheap imported bearings in it
[22:56:51] <joe9> they are not yellow or blue or black and not scored.
[22:57:04] <joe9> Is it a big deal to repack them?
[22:57:14] <pfred1> got grease?
[22:57:17] <jdhnc> or would tehy benefit from repacking
[22:57:17] -!- cmorley has quit [Read error: Operation timed out]
[22:57:25] <pfred1> yeah they're run like new
[22:57:27] <MattyMatt2> ah vxb have a C3 spec one for $6.88
[22:57:29] <joe9> pfred1: as you are aware, I had a runout of 0.002 inches with these bearings.
[22:57:34] <joe9> I am trying to get rid of that.
[22:57:54] <joe9> I do not mind spending some money < $100 to get rid of this runout.
[22:57:54] <pfred1> repack them you'd be surprised what some grease can do
[22:58:04] <joe9> i have a lot of grease.
[22:58:11] <pfred1> do it
[22:58:17] <joe9> ok, thanks. will do.
[22:58:23] <pfred1> I repacked my mill's spindle and it helped a lot
[22:58:36] <pfred1> it is probably due again
[22:58:43] <MattyMatt2> fill your boots http://www.ebay.com/itm/Lot-15-SKF-Federal-Mogul-Bearings-G72-MSA-6204-RSJ-6201-2RSJ-6585-/290674449990
[22:59:07] <pfred1> I use wheel bearing grease
[22:59:18] <joe9> pfred1: I do not mind repacking them. When the current runout is 0.002inches, will repacking them remove that? It needs to be so accurate, am not sure if I can ever get these bearings to that accuracy.
[22:59:24] <joe9> pfred1: does that make sense?
[22:59:44] <pfred1> are they bone dry?
[23:00:07] <joe9> no, I have not opened them still.
[23:00:10] <pfred1> like are they spinning really easily
[23:00:20] <pfred1> you should be able to tell if they're loaded or not
[23:00:25] <joe9> pfred1: no, they are not.
[23:00:32] <pfred1> a loaded bearing won't even spin
[23:00:34] -!- Thetawaves has quit [Quit: This computer has gone to sleep]
[23:00:36] <joe9> they are pretty tight. they stop spinning as soon as I let go.
[23:00:56] <pfred1> then maybe they're just sloppy
[23:01:16] <pfred1> it sounds to me like you might not get all you're looking for out of a repack
[23:01:29] <joe9> good to know. thanks.
[23:01:46] <pfred1> might get something if they were empty I might have said it should work but as you describe it I don't know
[23:02:10] <joe9> what are the best bearings which are accurate (at <= $100)?
[23:02:20] <pfred1> grease can do a lot but if you already have some it isn't a miracle salve
[23:02:44] <MattyMatt2> SKF are one of the good known brands
[23:03:11] <pfred1> so this is a drill press?
[23:03:16] <joe9> yes, drill press.
[23:03:22] <joe9> central machinery 38142
[23:03:53] -!- syyl has quit [Quit: Leaving]
[23:05:07] <MattyMatt2> ah C3 is only ABEC 3. you can get better than that
[23:05:40] <MattyMatt2> so I guess the $2 ones are ABEC 1 or worse
[23:05:59] <pfred1> I'm looking at hte exploded view of it where the heck are the lower bearings?
[23:06:33] <joe9> #12 in page 4
[23:06:34] <pfred1> there is just the #9 on the spindle I see
[23:06:54] <pfred1> ah 12 slips all the way down
[23:06:57] <joe9> #9 is the small one and #12 is the big one at the bottom.
[23:07:04] <joe9> yes.
[23:07:07] <pfred1> yeah there is uppers and lowerso n spindles
[23:07:11] <pfred1> the lower is the one that matters
[23:07:30] <pfred1> the upper well do you drill up there?
[23:08:00] <pfred1> I'll say this right now the scuzz that passes for grease in china you're always better off replacing it
[23:08:03] <joe9> there is a little bit of play on the lower one.
[23:08:23] <pfred1> I think it is how they get rid of their toxic waste
[23:09:19] <pfred1> seriously they use really low performance lubricants
[23:09:21] <joe9> it looks pretty tightly sealed. I doubt I will have the accuracy by changing the grease of this ball bearing.
[23:09:37] <joe9> It might be a pita to get the seal out.
[23:09:47] <pfred1> oh yeah they don't make it easy
[23:09:53] <MattyMatt2> I think a branded abec3/3+ 6204 will sort you out. looks like $7 will do it from various suppliers
[23:09:58] <pfred1> then run the one you popped up
[23:10:29] <jdhnc> mcmaster has bearings.
[23:10:50] <joe9> no, they are different sizes (up = PL8 6201z and bottom = CKBC 6204Z)
[23:11:09] <pfred1> don't drill usually align themselves when they contact work?
[23:11:51] <joe9> jdhnc: what do you think of "thrust bearings"? I read about them on wikipedia and they seem to have no issues with lateral travel
[23:12:05] <joe9> so, probably will never develop slop again with the "thrust bearings".
[23:12:12] <pfred1> joe9 are you trying to mill with your drill?
[23:12:29] <pfred1> because that never really works
[23:12:31] <joe9> pfred1: not now, though that would be cool to do in future.
[23:12:37] <pfred1> no don't do it
[23:12:44] <joe9> oh, ok. good to know. thanks.
[23:12:47] <pfred1> drill presses don't have the spindles for it
[23:13:04] <joe9> ok, thanks. will not do so.
[23:13:05] <pfred1> if yo usaw the size of the spindle on my mill which is a POS you'd know
[23:13:26] * MattyMatt2 currently mills with a dremel
[23:13:44] <pfred1> like how big around is your #11 piece?
[23:13:49] <MattyMatt2> and it wasn't the weak point on my machine :p
[23:14:14] <MattyMatt2> probably is now I've fixed up the machine a bit
[23:14:15] -!- skunkKandT has quit [Remote host closed the connection]
[23:14:58] <joe9> pfred1: the bottom hole is around 5 cm.
[23:15:24] <MattyMatt2> 47mm is the OD of a 6204
[23:15:45] <pfred1> oh wait a minute I think what I'm measuring on my mill coorponds to your #13 piece
[23:16:04] <joe9> so, ABEC-7 is the best out there?
[23:16:07] <pfred1> and it is 75mm in diameter
[23:16:45] <pfred1> the spindle shaft
[23:16:57] <joe9> pfred1: the bottom is 1.5 cm
[23:17:07] <joe9> and the top thin portion is 0.5 cm
[23:17:14] <joe9> or 0.6cm 'ish.
[23:17:20] <pfred1> joe9 drill presses are designed to push straight down
[23:17:41] -!- servos4ever has quit [Quit: ChatZilla 0.9.85 [SeaMonkey 2.0.11/20101206162726]]
[23:17:43] <pfred1> they're not designed for laterlal loads at all even if you changed the bearings stuff is just too small
[23:17:49] <joe9> pfred1: it would very cool to have it mill. but, I do not care about it right now. have no plans.
[23:18:11] <joe9> but, at some point in future, when I plan on building a cnc milling machine, I could reuse this.
[23:18:13] <pfred1> yeah people do it and they're unhappy and end up wrecking their machines
[23:18:22] <MattyMatt2> http://www.ebay.com/itm/5204-ZZ-Premium-Double-Row-Bearing-20x47x20-6-ABEC-3-/220322483913
[23:18:33] <MattyMatt2> could you fit a thicker one it?
[23:18:34] <joe9> pfred1: but, if it is a biggie, i am not bothered to make this a mill.
[23:18:41] <pfred1> I mean you'd be able to do soft stuff like plastic
[23:18:55] <joe9> pfred1: if I need it, it would be for milling pcb's.
[23:18:57] <pfred1> but even aluminum might be pushing it
[23:19:09] <pfred1> how high RPM is your mill?
[23:19:13] <pfred1> drill
[23:19:15] <joe9> 3600rpm
[23:19:22] <pfred1> yeah that is beans to a PCB
[23:19:46] <pfred1> the smallest diameter bit you can run is about an 1/8th of an inch
[23:20:02] <pfred1> i mean you can run smaller but you're under driving it
[23:20:19] <joe9> why do you say that? I am planning on drilling using a 0.5 mm bit (1/72inch)
[23:20:32] <joe9> are you talking about milling?
[23:20:36] <pfred1> you need periphery speed to make chips climb the flutes
[23:20:48] <pfred1> or they jamb up
[23:21:13] <joe9> let's forget about milling. I want to get it to drill without a runout.
[23:21:16] <pfred1> I mean it works but it doesn't work as wel las it could or should
[23:21:34] <pfred1> once the bit is on the stock the bit itself should run true
[23:21:54] <pfred1> the nise of the drill bit will act as a bearing
[23:21:55] <joe9> i was drilling 1/32inch holes and was ok with it. other than the runout and issues, it was drilling like butter.
[23:21:57] <pfred1> nose
[23:22:19] <pfred1> yeah don't ever expect a twist drill to yield al lthat accurate a hole
[23:22:23] <MattyMatt2> somebody asked me if his 400k rpm air powered spindle was suitable for pcb work. I said yes and I'm not jealous
[23:22:25] <pfred1> that is why they make reamers
[23:24:04] <pfred1> let's calculate your surface speed with a 1/32 bit
[23:24:59] <pfred1> 29.45 SFPM
[23:25:20] <pfred1> when you should be running 50 or better
[23:25:30] <joe9> pfred1: i was seeing a runout of 0.010 inches at the chuck.
[23:25:37] <pfred1> I'm not saying it won't work it just won't work as well as it should
[23:25:40] <joe9> I figure it is because of the sloppy spindle bearings
[23:26:00] <joe9> I want to get rid of that large runout. a runout of 0.005 inches is ok, imho.
[23:26:24] <pfred1> well you need some or your spindle won't rotate
[23:26:54] <pfred1> try this hold a drill down on some stock and check your runout
[23:27:19] <pfred1> like crank down on the handle on a piece of metal and measure it turning it by hand
[23:27:34] -!- crib has quit [Ping timeout: 252 seconds]
[23:27:38] <pfred1> like don't measure it with the chuck floating in the air
[23:27:49] <pfred1> load it
[23:28:09] <pfred1> because that is all that really matters
[23:30:28] <pfred1> this thing is marketed as a heavy duty drill press not a fine precision instrument
[23:30:52] <pfred1> I'm sure it knocks holes in stuff great
[23:31:51] <pfred1> I'm not so sure you can expect much more of it either
[23:32:21] <joe9> MattyMatt2: i do not need angular bearings as this is just for drilling. do you agree?
[23:32:45] <joe9> pfred1: are you saying that a runout of 0.010 " is ok?
[23:32:54] <joe9> with the chuck not loaded.
[23:33:09] <pfred1> joe9 I'm saying when you're loaded on work your runout is going to change
[23:33:19] <joe9> ok, thanks.
[23:33:56] <pfred1> it isn't something that is intuitive but think about it the drill bit itself is like another bearing and your bearings will be pushed too
[23:34:12] <archivist> with .01" runout either adjust of never use for fine work
[23:34:20] <archivist> fo/or
[23:34:32] -!- crib [[email protected]] has joined #linuxcnc
[23:35:04] <joe9> archivist: that is what I am doing. I have the spindle bearings out.
[23:35:16] <joe9> there is a small sloppyness in the spindle bearings.
[23:35:29] <joe9> I am thinking of replacing with an ABEC-7 bearing and see how it goes.
[23:35:39] <MattyMatt2> angular bearings is a luxury perhaps. they'd last longer doing lots of heavy drilling
[23:35:47] -!- bedah has quit [Quit: Ex-Chat]
[23:35:59] <pfred1> it is a heavy duty drill press
[23:36:14] * pfred1 beats the snot out of drill presses
[23:36:18] <archivist> it is the wrong drill press for fine work
[23:36:25] <joe9> pfred1: I am not disputing what you are saying. I am just trying to make the best out of the situation.
[23:36:48] <pfred1> most drill issues are with the drills themselves
[23:37:01] <pfred1> and i don't mean the drill press
[23:37:09] <joe9> oh, ok. the spindle or quill is off, you say.
[23:37:12] <MattyMatt2> would the double row one fit? it's 6.6mm thicker than a 6204
[23:37:43] <MattyMatt2> presumably 2 rows is twice as good, and the quality sounds nice
[23:37:51] <pfred1> no one in their right mind expects accuracy with twist drills anyways
[23:38:08] <joe9> MattyMatt2: thickness of the shaft is around 1.3 cm
[23:38:26] <MattyMatt2> 6204 is 20mm ID
[23:38:46] <joe9> pfred1: "As to how much run-out is acceptable, I'd say that 2 thou total runout is reasonable for a cheap drill press," from http://forum.canadianwoodworking.com/showthread.php?26529-Drill-Press-Runout-what-is-reasonable
[23:38:49] <MattyMatt2> but I've also seen 6204 - blahblah with 3/4" ID
[23:39:26] <MattyMatt2> 6201 is 12mm ID
[23:39:43] <pfred1> joe9 measured where?
[23:40:07] <archivist> and how
[23:40:10] <pfred1> indeed
[23:40:19] <joe9> pfred1: good point. don't know and how, too?
[23:40:39] <pfred1> all I know is the machine is going to be different just sitting there as opposed to when it is actually engaged in drilling stock
[23:40:42] <archivist> is there any bending or machine flexing happening
[23:40:51] <pfred1> and when it is drilling is all that really matters
[23:41:19] <pfred1> it just isn't the kind of stuff i lose sleep over
[23:41:27] <pfred1> if it stops spinning around then I worry
[23:41:56] -!- mhaberler has quit [Quit: mhaberler]
[23:42:36] <pfred1> I can shake the spindle of my mill and it moves but it cuts accuratly for it
[23:43:00] <pfred1> be cause once it is on work it ain't moving no more!
[23:44:07] -!- jstenback has quit [Remote host closed the connection]
[23:44:12] <MattyMatt2> it's nicer if there's no vibration & stuff tho
[23:44:13] <joe9> in this case, I think the "cylindrical bearings" might be a better choice.
[23:44:15] <archivist> is the spindle ok just a bad chuck
[23:44:37] <archivist> find the fault first
[23:44:38] <MattyMatt2> joe9 yeah if you can get the right size
[23:44:46] <joe9> http://www.thisoldtractor.com/gtbender/bearing.htm
[23:44:52] <joe9> i agree.
[23:45:04] <joe9> archivist: I think it is the spindle bearings at this point.
[23:45:20] <joe9> with a new chuck and arbor, I see the same runout as the old chuck + arbor
[23:45:31] -!- jstenback [jstenback!~jstenback@2620:101:8003:200:224:e8ff:fe39:34c2] has joined #linuxcnc
[23:45:49] <joe9> so, it is not the chuck or arbor. and, the other is the spindle bearing.
[23:46:06] <pfred1> then measure the taper but I still don't think when the chuck is up in the air matters
[23:46:08] <joe9> with the bearing, when I exert sideways pressure, I can see the bearing moving a little.
[23:46:08] <MattyMatt2> or the taper inside the spindle is not true
[23:46:18] <joe9> hence, I am assuming it is the bearing at this point.
[23:46:28] <archivist> remove end float before you measure or replace
[23:46:42] <pfred1> they don't call it a drill PRESS for nothing you know?
[23:46:49] <joe9> archivist: what is "end float"?
[23:46:57] <archivist> play
[23:47:05] <archivist> add a spring
[23:47:28] <archivist> wavy spring at the top
[23:47:43] <joe9> MattyMatt2: where do you get the bearing size?
[23:47:56] <joe9> I cannot seem to find them with google. and mcmaster has inches ratings.
[23:48:02] <joe9> s/ratings/specs/
[23:48:18] <MattyMatt2> ebay :)
[23:48:37] <pfred1> mcmaster doesn't give dimensions in metric?
[23:49:13] <MattyMatt2> just search for 6204 and 6201 and that'll take you to the bearing vendors, and then search their shop for those numbers to get their range
[23:49:23] <joe9> it does, I am trying to figure out what the sizes of "6201Z" correspond to, in metric/sae.
[23:49:32] <joe9> MattyMatt2: ok, thanks.
[23:50:27] <MattyMatt2> Z implies only one side shielded, both sides is usually ZZ
[23:50:41] <pfred1> whoah if you want an Ultra-Precision Angular-Contact Steel Ball Bearings—ABEC-7 you sure are going to have to pay for it
[23:50:55] <pfred1> but they will tell you the metric size
[23:51:01] <joe9> pfred1: they are just around 10 bucks
[23:51:11] <joe9> not, angular contact.
[23:51:12] <pfred1> http://www.mcmaster.com/#standard-ball-bearings/=gfpxtx
[23:51:15] <MattyMatt2> I'm betting a decent abec 3 will be considerably better than what he';s got
[23:51:15] <joe9> though.
[23:51:28] <joe9> MattyMatt2: yes, that is what I am betting on, too.
[23:51:35] <pfred1> Also known as machine tool spindle bearings, these 15° contact angle bearings are made to super-tight ABEC-7 dimensional tolerance standards and can handle very high speeds.
[23:52:06] <MattyMatt2> that's for their $3k drill presses :)
[23:52:20] <pfred1> I bet they're really nice bearings
[23:52:31] <joe9> pfred1: any reason you picked "angular bearings"
[23:52:33] <pfred1> $400 !?!
[23:52:54] <pfred1> joe9 I have expensive taste
[23:53:01] <pfred1> I just wanted to see if it was in metric
[23:53:31] <joe9> MattyMatt2: meant to ask you this. I do not see any bearings. both sides seem sealed, why do you pick "open" and not "double shielded"?
[23:54:23] <joe9> http://www.mcmaster.com/#standard-ball-bearings/=gfq0q9 i am looking at these.
[23:54:33] <MattyMatt2> I don't. you want a shield of some sort but I'd use rubber shields if you're using water coolant
[23:55:05] <MattyMatt2> ZZ is fine afaics
[23:55:14] <MattyMatt2> or Z
[23:55:26] <joe9> i think the builtins seem to be ZZ, though the part says just a Z.
[23:55:35] <joe9> from what I see.
[23:55:53] -!- hatch789 [[email protected]] has joined #linuxcnc
[23:56:05] <MattyMatt2> that's just a naming quirk I think
[23:56:47] <hatch789> hello everyone
[23:57:06] <pfred1> mcmaster probably buys their bearings off vxb and jut jacks up the prices
[23:57:14] <hatch789> I have a question for a first time EMC2 user. Has anyone got a second to see if you can help me out?
[23:57:27] <joe9> let me check vxb.
[23:57:27] <pfred1> hatch789 just ask if anyone knows they'll say
[23:57:45] <MattyMatt2> joe9 I did. they have cheap, stainless or ceramic
[23:58:01] <joe9> they do not have ABEC-7?
[23:58:19] <joe9> pfred1: did you see metric in mcmaster.com?
[23:58:21] <MattyMatt2> yes but ceramic
[23:58:23] <joe9> i see only sae there.
[23:58:36] <MattyMatt2> you probably don't want ceramic in a drill
[23:58:43] -!- Rogue_ [Rogue_!42bff3ba@gateway/web/freenode/ip.66.191.243.186] has joined #linuxcnc
[23:58:45] * pfred1 got all his bearings off vxb
[23:58:50] <joe9> 6201Z = 12X32X10 mm
[23:58:50] <hatch789> OK I have a 7i49 board that I'm trying to connect my servo up to. I have my resolvers wired, but my servo is what I'm confused by. It shows 4 connections. ENA0-, ENA0+, GND0, AOUT0
[23:59:22] <hatch789> SO my question is this. Do I want to use the ENA pair? or do I use the AOUT0 & GND pair?
[23:59:54] * pfred1 is a stepper guy