#linuxcnc | Logs for 2012-07-24

Back
[00:00:29] <JT-Shop> no, I uploaded it to the wrong place
[00:00:49] <JT-Shop> ok try now
[00:02:30] -!- phantoneD [[email protected]] has joined #linuxcnc
[00:02:39] -!- Farthen has quit [Excess Flood]
[00:03:12] -!- Farthen [Farthen!~Farthen@2a01:4f8:101:2a4:0:bc28:b2e1:9] has joined #linuxcnc
[00:04:36] -!- phantoxeD has quit [Read error: Operation timed out]
[00:04:44] phantoneD is now known as phantoxeD
[00:07:24] <Tom_L> i can probably work with that
[00:07:34] <Tom_L> there's no ball on it but the stem is there
[00:13:23] -!- skunkworks__ [skunkworks__!~chatzilla@str-bb-cable-south-3-102.dsl.airstreamcomm.net] has joined #linuxcnc
[00:13:41] -!- rob_h has quit [Ping timeout: 248 seconds]
[00:15:06] <Tom_L> well crap. i'm having trouble getting the surfaces to a flat profile
[00:31:45] -!- r00t-Shed [[email protected]] has joined #linuxcnc
[00:32:11] <r00t-Shed> jdh, did you cut any knobs?
[00:32:45] <r00t-Shed> i think mine is going to be a little bit too big
[00:32:50] <r00t-Shed> http://i.imgur.com/jwtyz.png
[00:34:10] <djdelorie> is that millimeters, or inches?
[00:34:22] <r00t-Shed> inches but i accident mm in cad
[00:35:00] <Tom_L> JT-Shop what's the thread end diameter?
[00:35:35] <r00t-Shed> dj linuxcnc thinks its a 35inch knob
[00:35:57] <djdelorie> and that's too big? ;-)
[00:36:07] <r00t-Shed> easy to grab!
[00:36:44] <Tom_L> i'm not having much luck with this model. the lathe package is basically 2.5d
[00:36:59] <Tom_L> so i'm finding out
[00:43:51] -!- Valen [[email protected]] has joined #linuxcnc
[00:50:36] -!- geografa has quit [Quit: geografa]
[01:03:57] -!- phantoneD [[email protected]] has joined #linuxcnc
[01:07:15] -!- phantoxeD has quit [Ping timeout: 255 seconds]
[01:17:52] <r00t-Shed> http://i.imgur.com/M0jqw.png
[01:18:00] <r00t-Shed> that looks better
[01:18:19] -!- phantoxeD [[email protected]] has joined #linuxcnc
[01:19:12] -!- phantoxeD has quit [Read error: Connection reset by peer]
[01:19:27] <r00t-Shed> now for another round of "Will It Cut!"
[01:19:30] -!- phantoxeD [[email protected]] has joined #linuxcnc
[01:21:37] -!- phantoneD has quit [Ping timeout: 240 seconds]
[01:33:49] <gmagno> erm... is there any home command in gcode? I mean, an instruction that would tell the parser that from that moment on it should consider that position as the zero reference (home)?
[01:36:13] <gmagno> scary silence here...
[01:36:17] <gmagno> :-|
[01:36:23] <djdelorie> SSHHHH!!!
[01:36:31] <gmagno> :-X
[01:37:22] <gmagno> djdelorie, you've been helping me a lot :) what can you tell me about this question?
[01:37:30] <djdelorie> it's self-referential?
[01:38:10] <djdelorie> there are eight words in it, and you forgot to capitalize the first one?
[01:38:46] <djdelorie> or did you mean the gcode question?
[01:38:47] <Tom_itx> JT-Shop you asleep?
[01:39:11] <gmagno> djdelorie, the gcode question, what else?
[01:39:29] <djdelorie> I was telling you about the question "what can you tell me about this question?"...
[01:39:48] <djdelorie> I don't know gcode itself that well, I know that "touching off" in linuxcnc sets the part-origin...
[01:39:51] <gmagno> bah... sometimes you complicate life
[01:39:54] <gmagno> :)
[01:41:24] <gmagno> I'm doing a gui for the grbl controller: http://postimage.org/image/z91ju28c5/ and I'm trying to implement a feature similar to the homing used by linuxcnc
[01:52:47] <Connor> okay, can someone point me into the right direction for setting up auto tool changer using the tool table etc ??
[01:54:10] -!- Brandonian has quit [Quit: Brandonian]
[01:55:56] <jdh> Not Me(tm)
[01:55:57] <Connor> Yes? No? Maybe? Go Away? :)
[01:56:12] <jdh> but, the plugs/etc went out today.
[01:56:22] <Connor> Cool.
[01:56:36] <Connor> I need to find a source for cheap scrap alumn...
[01:57:20] <Connor> I need to start design a temp setup for the cylinder until I can get the belt driven spindle working.
[01:57:28] <r00t-Shed> nice
[01:57:33] <jdh> no junk yard there?
[01:57:43] -!- Guthur [[email protected]] has joined #linuxcnc
[01:59:07] <Connor> I just need to find a machine shop or metal supplier who has shorts..
[01:59:35] <djdelorie> you can buy shorts online, but that kinda defeats the purpose...
[01:59:35] <Connor> I need some steel too.
[02:00:01] <Connor> Speedy Metals is nice.. but.. would rather have a local source.
[02:00:45] <jdh> shipping sucks for steel
[02:01:01] <Connor> jdh: My design for the draw bar is kinda cool..
[02:01:41] <Connor> Going take too plates and cut a circle in them (so they're each have half of it).
[02:02:10] <Connor> Those get sandwiched between two other plates with a little slack so they can slide back and force.
[02:02:28] <Connor> those plates will have a large hole large enough for the tophot of the draw bar to go through.
[02:02:44] <Tom_L> what tool plane does a lathe use?
[02:02:56] <jdh> xz
[02:03:45] <Tom_itx> G18
[02:03:51] <Connor> then going to have two bars with 45degree angles cut on them go through the top plate and will engage the plates that can move.. pushing them together.
[02:04:29] <jdh> I have briefly thought of power drawbars, but just can't picture it.
[02:04:46] <Tom_itx> feed tube
[02:05:16] <Tom_itx> oh he's working on spindle?
[02:05:37] <Tom_itx> my local guy has all the aluminum you could dream of
[02:06:18] -!- davec_ [[email protected]] has joined #linuxcnc
[02:06:30] -!- SWPadnos_ [[email protected]] has joined #linuxcnc
[02:06:31] <Tom_itx> up to blocks around 4' x 2' x 3'
[02:06:32] -!- jthornton_ [[email protected]] has joined #linuxcnc
[02:06:32] -!- JT-Shop-2 [[email protected]] has joined #linuxcnc
[02:06:32] -!- cylly [[email protected]] has joined #linuxcnc
[02:06:33] <Tom_itx> mmm
[02:06:33] -!- pjm__ [[email protected]] has joined #linuxcnc
[02:06:33] <Tom_itx> JT-Shop-2?
[02:06:55] -!- Loetmichel has quit [Read error: Connection reset by peer]
[02:06:55] -!- JT-Shop has quit [Read error: Connection reset by peer]
[02:06:56] -!- jthornton has quit [Read error: Connection reset by peer]
[02:06:56] <Connor> so first 3/4" stroke of the cylinder will cause the tophat to be captured and the last 1/4" will compress the belleville springs.
[02:06:56] <Connor> jdh once I figure it all out I'll have it done up in cad and will send it to you.
[02:07:03] -!- pjm has quit [Read error: Connection reset by peer]
[02:07:03] -!- RagingComputer has quit [Ping timeout: 264 seconds]
[02:07:03] -!- SWPadnos has quit [Ping timeout: 264 seconds]
[02:07:07] SWPadnos_ is now known as SWPadnos
[02:07:08] -!- Guthur has quit [Read error: Connection reset by peer]
[02:07:16] <Tom_itx> i saw some full length round bar there the other day around 12" diameter
[02:07:17] -!- tronwizard has quit [Ping timeout: 248 seconds]
[02:07:19] -!- HighSpeedLowDrag has quit [Ping timeout: 264 seconds]
[02:07:19] -!- adb has quit [Ping timeout: 264 seconds]
[02:07:19] -!- uwe_ has quit [Ping timeout: 264 seconds]
[02:07:19] -!- mal`` has quit [Ping timeout: 264 seconds]
[02:07:26] <Connor> Tom_itx: Nice.
[02:07:32] -!- uwe_ [[email protected]] has joined #linuxcnc
[02:07:32] -!- Guthur [[email protected]] has joined #linuxcnc
[02:07:36] -!- adb [[email protected]] has joined #linuxcnc
[02:07:39] <jdh> without thinking too much about it, would a one-sided cam-action thing work?
[02:07:52] -!- tronwizard [[email protected]] has joined #linuxcnc
[02:08:00] -!- beawesomeinstead has quit [Ping timeout: 248 seconds]
[02:08:00] -!- Skurlat has quit [Ping timeout: 248 seconds]
[02:08:03] -!- RagingComputer [[email protected]] has joined #linuxcnc
[02:08:17] <Connor> jdh: Probably. I was thinking of a keyhole design.. but decided the movement was going to be too much..
[02:08:32] -!- HighSpeedLowDrag [HighSpeedLowDrag!~HighSpeed@host-184-167-245-185.dur-co.client.bresnan.net] has joined #linuxcnc
[02:08:38] <jdh> you could trade off stroke for pressure
[02:08:39] -!- cevad has quit [Ping timeout: 253 seconds]
[02:08:52] <Connor> how so ?
[02:10:01] <Connor> In the design I'm thinking of, I might even need the full 3/4" of stroke from the 1"
[02:10:07] <jdh> if you had a 2" stroke at half the required pressure, you could lever the cam to give half the stroke and twice the pressure
[02:10:26] <Connor> Oh. well.. Yea.
[02:10:54] <Connor> but, that would require even more complex mechanical design.
[02:11:05] <Connor> not as simple as a direct force pinch style.
[02:11:25] -!- r00t-Shed has quit [Ping timeout: 252 seconds]
[02:11:39] <jdh> so, your cylinder floats above the spindle when not in use?
[02:11:46] <Connor> yup.
[02:12:20] <jdh> I got another 'free' issue of Digital Machinist. It's almost interesting.
[02:12:29] <Connor> I even figured out a way to not have to use air to return it back. Just put a few PSI in the 1 return stage and cap it.
[02:12:35] -!- Tom_L has quit []
[02:12:55] <jdh> it won't hold
[02:13:03] <jdh> might for a while though. Put a spring on it?
[02:13:33] -!- r00t4rd3d [r00t4rd3d!~r00t4rd3d@unaffiliated/r00t4rd3d] has joined #linuxcnc
[02:13:40] <Connor> Naahh.. I'll just re-pressurize it.. once in a a while.
[02:14:06] <Connor> Those things are pretty air tight...
[02:14:11] <jdh> need a check valve or something to pressurize it.
[02:14:37] -!- GH-12341 [[email protected]] has joined #linuxcnc
[02:14:58] <Jymmm> jdh: If I took a 10ft pipe filled it with water, would the bottom of the pipe be equiv pressure as being 10ft underwater?
[02:15:00] <Connor> Heck atmosphere PSI almost was enough to full retract it..
[02:15:07] -!- GH-12341 has quit [Read error: Connection reset by peer]
[02:16:20] <pcw_home> Jymmm: If its vertical , yes
[02:16:54] -!- GH-1234 has quit [Ping timeout: 264 seconds]
[02:17:02] <jdh> because, it woudl be 10ft underwater!
[02:17:08] -!- elmo40 [elmo40!~Elmo40@CPE0017ee09ce6d-CM001bd7a89c28.cpe.net.cable.rogers.com] has joined #linuxcnc
[02:17:34] <pcw_home> its just a tall narrow tank...
[02:17:34] <jdh> or, about 1.3ATA
[02:17:45] -!- Guthur has quit [Remote host closed the connection]
[02:18:00] <Jymmm> Ok, I want to "test" something that say they are waterproof to 3m
[02:18:17] <Tom_itx> Jymmm you don't watch enough mythbusters
[02:18:17] <jdh> not water resistant?
[02:18:19] <Connor> wouldn't it matter on the size of the pipe ?
[02:18:30] <Tom_itx> remember that vertical tank they made?
[02:18:52] <Connor> which one? the one that busted? or the one out of the tubing ? :)
[02:18:58] <Jymmm> No, says waterproof to 3m for 20minutes
[02:19:08] <Tom_itx> the one they shot bulltet into
[02:19:09] <Jymmm> 30min
[02:19:12] <Tom_itx> bullets*
[02:19:19] <jdh> I wouldn't do it if you like whatever it is,.
[02:19:34] <r00t4rd3d> http://i.imgur.com/WQW6C.jpg
[02:19:37] <Jymmm> why?
[02:19:37] <r00t4rd3d> :D
[02:20:20] <jdh> I've had a lot of waterproof stuff that isn't. A lot of times, it says that the 3m is just static pressure. No splash, no abrupt pressure change
[02:21:15] <Jymmm> And that's what I want to test for =) 30day return policy FTW
[02:21:24] <ReadError> r00t4rd3d: thought you got pissed and left earlier ;)
[02:23:05] <r00t4rd3d> went out to the garage and logged on
[02:23:30] -!- mazafaka has quit [Ping timeout: 264 seconds]
[02:24:27] -!- mazafaka [mazafaka!~mazafaka_@unaffiliated/mazafaka] has joined #linuxcnc
[02:24:42] <ReadError> i want to cut a bad ass aluminum nuckle set
[02:24:50] <ReadError> not really to use but just to see how bad ass i can make some
[02:24:59] -!- sumpfralle has quit [Ping timeout: 252 seconds]
[02:25:06] <jdh> how about a bad ass MDF knuckle set
[02:25:12] <ReadError> i actually wanted to like
[02:25:14] -!- sumpfralle1 has quit [Ping timeout: 260 seconds]
[02:25:21] <ReadError> make a delrin+aluminum iphone case
[02:25:22] <Jymmm> s/MDF/EPS/
[02:25:26] <ReadError> with the set built in
[02:25:35] <ReadError> so like on the side
[02:25:50] <jdh> Read: http://www.engadget.com/2012/07/20/igills-iphone-dive-computer/#continued
[02:26:17] -!- i_tarzan [[email protected]] has joined #linuxcnc
[02:26:50] <jdh> make one of those
[02:29:49] <Jymmm> jdh: Yeah, but can you make a phone call with it?
[02:30:07] <Jymmm> Hello, 911?
[02:30:37] <Jymmm> Hello Dominos, do you deliver?
[02:30:38] <jdh> I can make calls maybe 10 miles out, if I hold the phone up fairly high
[02:31:56] <Jymmm> underwater?
[02:32:09] <jdh> no, on my boat, standing up.
[02:32:21] <Jymmm> awww, where's the fun in that?
[02:33:47] <Jymmm> I wonder if that dice omputer at 130ft voids your iphone warrnaty?
[02:34:35] <jdh> I actually have a $1900 dive computer, but don't tell my wife.
[02:35:48] <Jymmm> nor the cost of all those tanks in your garage =)
[02:36:18] <jdh> I've sold 6 or so fairly recently
[02:36:30] <Jymmm> 80lb?
[02:37:01] <jdh> they weighed a lot more than that
[02:37:08] <Jymmm> capacity
[02:37:23] <jdh> cubic feet
[02:37:27] <Jymmm> I have a 40lb N2 tank
[02:37:46] <jdh> two sets of double 130's, 1 set of 85's
[02:37:53] <Jymmm> ah
[02:38:02] <jdh> 40 lb?
[02:38:05] -!- ScribbleJ has quit [Ping timeout: 246 seconds]
[02:38:11] <jdh> or 40 cubic feet?
[02:38:48] <Jymmm> your right
[02:38:56] <Jymmm> cf
[02:39:16] <Jymmm> I'm confusing with propane tank 5gal / 20lbs
[02:39:25] <jdh> is it 5 gallons?
[02:39:38] <Jymmm> Well 19.x
[02:39:49] <r00t4rd3d> https://www.google.com/#hl=en&safe=off&output=search&sclient=psy-ab&q=john+hudson+diving&oq=john+hudson+diving&gs_l=hp.3...3356.14033.1.14632.24.19.3.2.2.0.122.1920.10j9.19.0...0.0...1c.0KM0__4sUyg&psj=1&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.,cf.osb&fp=b8007472273293c9&biw=1600&bih=722
[02:39:57] <jdh> I got a non-empty one filled the other day, never coudl tell how much was in it. They put in like 3.4 gallons, but no idea how they knew it was full
[02:39:59] <Jymmm> since you can't fill a propane tank 100%
[02:40:00] <r00t4rd3d> is any of that you jdh?
[02:40:07] <jdh> dunno, it's one uglyass url
[02:40:20] <r00t4rd3d> google search
[02:40:31] <djdelorie> there's a plugin to unwrap the url for you...
[02:40:54] <Jymmm> jdh: When I get my 20lb tank refilled, it read 4.7 gallons on avg.
[02:41:05] <Jymmm> sometiems 4.5gallons
[02:41:10] <jdh> none of them looklike me.
[02:41:35] <Jymmm> jdh: I believe it's the back pressure that stops the filling.
[02:41:46] <Jymmm> auto shutoff
[02:41:51] <jdh> so, what does a normalish empty tank weigh
[02:42:13] <djdelorie> if a propane tank is "full" there's no room for vapor to form, so the tank just stops working
[02:42:17] <jdh> she filled it on a scale, but didn't set it.
[02:42:19] <Jymmm> 20lbs is the propane, net weight
[02:42:35] <djdelorie> my tank is 18 lbs empty, 38 lbs full
[02:42:43] <jdh> cool
[02:42:52] <djdelorie> it shoudl have a "tare" marked on the tank, that's the empty weight
[02:43:05] * Jymmm looks...
[02:43:14] <jdh> I have 3 tanks. I like to make sure the one I'm using on the smoker is full enough to last as long as needed.
[02:43:40] <Jymmm> TW 16.6 lbs
[02:43:51] <djdelorie> that would be it - Tare Weight
[02:44:00] <jdh> heh... guess I could have looked for that.
[02:44:29] <Jymmm> I didn't know, I only know about the certification date
[02:44:48] <jdh> cut3d did a nice job on that stl file for the clamp knob
[02:44:50] <Jymmm> top right of the collar, MM-YY
[02:45:06] <jdh> or it looks like it would if this demo version would save toolpaths
[02:45:31] <Jymmm> 10-12 == October 2012, bust be recert every 10 years
[02:45:54] <jdh> propane tanks get retested?
[02:46:00] <Jymmm> Yeah
[02:46:02] <jdh> surely not
[02:46:17] <Jymmm> well, they can hydro them
[02:47:05] <Jymmm> I buy used tanks off craigslist, if it's getting up there or has expired, I just exchange them at Lowes, then refill after that
[02:47:13] <jdh> when mine start looking bad, I take them to the exchange place
[02:47:24] <jdh> or if I need a full one and the cheap fill place is closed
[02:47:58] <jdh> last one I got a lowes/blue-rino felt half full. Didn't weigh it
[02:48:04] <Jymmm> I refill the 20# tanks for $16.34 out the door. that's with 4.6 gallons
[02:48:07] -!- demacus_ [[email protected]] has joined #linuxcnc
[02:48:13] <Jymmm> they onyl fill them to 15lbs =)
[02:48:22] <Jymmm> says so on the label if you read it
[02:48:55] <jdh> $13.25 at the grill store, they have a sign saying they fill them unlike the trade in places.
[02:49:24] <Jymmm> $13 for exchange or refill?
[02:49:32] <jdh> fill
[02:49:42] <Jymmm> thats cheap
[02:49:47] <jdh> I think the exchange is like $28 here
[02:50:08] <jdh> they close at 5:30 during the week, 4:00 on saturdays
[02:50:10] <Jymmm> $22 out the door exchange at lowes
[02:50:22] <Jymmm> @15lbs
[02:50:56] <jdh> http://www.mpja.com/email/07-24-12.asp?r=245198&s=8
[02:51:51] -!- demacus has quit [Ping timeout: 248 seconds]
[02:52:15] -!- skunkworks__ has quit [Remote host closed the connection]
[03:13:50] <Tom_itx> ok, that's not so bad for the first time messin with it
[03:20:03] -!- FinboySlick [[email protected]] has joined #linuxcnc
[03:21:44] <gmagno> ttl, bye
[03:21:46] -!- gmagno has quit [Quit: Leaving]
[03:27:17] -!- phaedrusbjb has quit [Quit: ChatZilla 0.9.88.2 [Firefox 13.0.1/20120614114901]]
[03:37:54] -!- Thetawaves has quit [Quit: This computer has gone to sleep]
[03:43:38] -!- JessicaRN [JessicaRN!4cf844c1@gateway/web/freenode/ip.76.248.68.193] has joined #linuxcnc
[03:43:39] -!- Thetawaves [[email protected]] has joined #linuxcnc
[03:44:10] <JessicaRN> hola folks. has anyone used pycam to generate gcode from stls?
[03:45:18] <Thetawaves> on occasion
[03:45:33] <JessicaRN> is it worth the dl?
[03:46:17] <Thetawaves> huh
[03:46:30] <Thetawaves> why don't you give it a try
[03:46:59] <JessicaRN> I'm hoping to create some stls from autodesk's online photo modeler app and then cut them on a fireball? (last statement: is it worth the time to download it?)
[03:47:14] <JessicaRN> what did you think of it?
[03:47:22] <JessicaRN> was it a decent app?
[03:48:03] <Thetawaves> i am a contributor/maintainer
[03:48:14] <Thetawaves> there is a lot of work being done on it right now
[03:48:15] <JessicaRN> of pycam?
[03:48:19] <JessicaRN> cool
[03:48:25] <Thetawaves> it has moved a long long way since the last stable release
[03:48:42] <JessicaRN> so, what are it's main weaknesses at the moment?
[03:49:00] <Thetawaves> nothing, it is godzilla.
[03:49:08] <JessicaRN> lol
[03:49:23] <JessicaRN> it can cut out my mom...
[03:49:25] <JessicaRN> cool
[03:49:46] <Thetawaves> there are other solutions
[03:49:58] <Thetawaves> but if you like to program, pycam is the easiest to get started on
[03:50:00] <JessicaRN> but seriously, when you compare it to bobcam or rhino, how does it stand up?
[03:50:08] <Thetawaves> lol what the fuck
[03:50:20] <Thetawaves> no where near
[03:50:48] <JessicaRN> please expand?
[03:50:49] <Thetawaves> we are open source CNC
[03:50:56] <JessicaRN> yeah, i know.
[03:51:07] <JessicaRN> thats why i ask about the limits of the app
[03:52:04] <JessicaRN> the long and short, will it take an stl file and make a mill toolpath in gcode?
[03:52:08] <Thetawaves> this would be OBVIOUS if you downloaded it and tried it out for your self.
[03:53:22] <JessicaRN> theta, you know, i get that. but there are like 7000 apps out there that all claim to be the best thing since sliced bread. I'm only in here asking questions so I can save a little time and limit my search. doesnt that sound reasonable?
[03:53:49] <uw> pycam is pretty good
[03:53:57] <uw> thats all i use to gen gcode
[03:54:18] <uw> however they dont damn respond to you on their irc chan, which is annoying
[03:54:35] <JessicaRN> you dont go out and drive every car ever manufactured before you decide to buy one. you read reviews and ask ppls opinions before you go shopping.
[03:54:50] <uw> well, thats kinda difffernt
[03:54:54] <uw> cause pycam is free
[03:55:07] <uw> if i could buy a car or get a free one, i wouldnt be really comparing options
[03:55:35] <JessicaRN> uw, if they are all as huffy as theta then I doubt the support is very helpful.
[03:55:58] <uw> oh on pycam? yea i dunno what hes mad at lol
[03:56:03] <Valen> if it took you 30 hours to learn to drive the free car only to find out it didn't do something you needed it would be kinda crappy
[03:56:29] <Valen> i think the general take away is most cam programs are kinda crappy
[03:56:29] <JessicaRN> uw, what do you think of it? what are the big limitations? what are the strengths?
[03:56:31] <uw> fortunately for me, personally, id still be happier with the free car.
[03:56:43] <JessicaRN> valen, thanks for that.
[03:56:55] <r00t4rd3d> pycam is slow to render stuff
[03:56:55] <uw> JessicaRN, well, its not always perfect. sometimes you have to fix what it generates manually
[03:57:10] <Valen> until you get to mastercam or something like that they all suck in their own special ways and they are all good at paticular things
[03:57:12] <Thetawaves> r00t4rd3d, tried it recently?
[03:57:19] <uw> it can be slow, on like 50k and up moves, ill admit
[03:57:20] <r00t4rd3d> i use it every day
[03:57:50] <JessicaRN> uw, poor optimization?
[03:57:58] <Thetawaves> r00t4rd3d, to be clear, you use the development version in the repository?
[03:58:08] <r00t4rd3d> no
[03:58:25] <Thetawaves> i made quite a few commits to speed it up a few months ago
[03:58:31] <uw> JessicaRN, Honestly, not really sure. Its really not bad though, I mean, i can deal with it
[03:58:32] <JessicaRN> valen, what is the current gold standard for cam apps?
[03:58:32] <Thetawaves> haven't made it into the standard version
[03:58:39] <r00t4rd3d> i mainly use it on windows
[03:58:42] <Valen> JessicaRN: probably mastercam
[03:58:44] <JessicaRN> uw, thx
[03:58:50] <Valen> i think its about $10-15k per seat
[03:59:04] <uw> yea see ^
[03:59:16] <Valen> we use rhinocam
[03:59:18] <Valen> v1
[03:59:20] <Thetawaves> r00t4rd3d, yeah, i made it so the toolpath can rotate/move in real time
[03:59:20] <JessicaRN> a flight to shenzen is cheaper... bet you can find it there for $35!
[03:59:29] <uw> ill take a car that is kinda slow with a seat that pinches the balls over some bullshit thats 10-15k
[03:59:38] <Valen> its got some shocking lack of optimisations
[03:59:40] <r00t4rd3d> cut2d is very nice but not free
[03:59:47] <Valen> but its easy to use
[04:00:00] <r00t4rd3d> cut2d is very easy too
[04:00:11] <JessicaRN> valen, have you used rhinos free offering? what are it's limitations?
[04:00:14] <Valen> I also use pcb2gcode
[04:00:22] <Valen> rhino has free stuff now?
[04:00:26] <JessicaRN> yeah
[04:00:34] <JessicaRN> called freemill
[04:00:36] <JessicaRN> i think
[04:01:00] <Valen> well blow me down
[04:01:06] <JessicaRN> is most of what you do cutting pcbs? do you do any complex 3d shapes?
[04:01:18] <Valen> mostly 3d
[04:01:33] <r00t4rd3d> http://i.imgur.com/WQW6C.jpg
[04:01:40] <JessicaRN> uw, luckily I don't have to worry 'bout pinched jiblets
[04:02:29] <JessicaRN> valen, i want to use this for art projects. lots of complex curves and such.
[04:02:57] <Valen> hows pycam at importing models these days?
[04:03:26] <JessicaRN> i'm going to try and start with stls generated by autodesks photo modeler and then modify and cut from those.
[04:03:26] <Thetawaves> it uses inkscape to do the translation
[04:03:30] <uw> haha fair enough!
[04:04:01] <uw> Valen, expect to edit them some...
[04:04:19] <Valen> thats what burnt me for it last time, i use rhino to model it
[04:04:43] <uw> i use autocad and yea, some mods are usually needed
[04:04:45] <Valen> if your doing 2d stuff then look at inkscapes gcode export plugins and such
[04:04:46] <uw> not much though
[04:05:37] <JessicaRN> i might do a pcb now and then, but mostly i'll be cutting sculptural pieces.
[04:05:56] <r00t4rd3d> my favorite programs are Microcarve, Cut2d and Sketchup with Phlatscript plugin.
[04:06:13] <Valen> if its all 2d/2.5d then you could even look at heightmap stuff
[04:06:46] <JessicaRN> funny thing? I own an old gerber prototyping machine. I'm planning on bumping the z axis from .5" to about 6"
[04:07:06] <JessicaRN> microcarve? What is that?
[04:07:19] <r00t4rd3d> image to gcode app
[04:07:33] <JessicaRN> is it 2.5d
[04:07:34] <JessicaRN> ?
[04:07:36] <uw> JessicaRN, whats the make and model on that machine?
[04:07:42] <uw> if you care to share
[04:07:49] <r00t4rd3d> http://microcarve.microcarve.biz/
[04:08:35] <r00t4rd3d> yeah 2.5d
[04:08:47] <r00t4rd3d> cut3d
[04:08:50] <JessicaRN> uw, dunno. I only had about 45 minutes to pick it up so i left a bunch of the guts. I only grabbed the x-y-z platform and the power supply
[04:08:53] -!- dhoovie [[email protected]] has joined #linuxcnc
[04:09:01] <r00t4rd3d> is another app, I have it but havent tried it yet
[04:09:13] <JessicaRN> so the model number is no longer with the stuff.
[04:09:31] <uw> oh no! you left guts?
[04:09:39] <uw> guts are important
[04:09:48] <JessicaRN> sadly, i did not get the drivers. I'll need to make my own. the steppers are funky
[04:10:06] <uw> bipolar type?
[04:10:18] <uw> its all good they work just fine
[04:10:24] <JessicaRN> yeah, guts are important, but it was a last minute salvage operation and time was limited
[04:10:26] <uw> my mill is keepin it real with bipolars
[04:10:49] <uw> oh so it was free?
[04:10:51] <uw> nicee
[04:11:29] <JessicaRN> well, kinda. i bought a whole house full of misc crap from the estate of a mad scientist.
[04:11:29] -!- draig has quit [Read error: Connection reset by peer]
[04:11:33] -!- draig_ [[email protected]] has joined #linuxcnc
[04:11:50] <JessicaRN> i got a SEM out of the deal as well. sold that and paid for all the rest!
[04:12:02] <uw> nice
[04:12:24] <uw> you have already peaked my interested at "mad scientist estate sale"
[04:12:26] <JessicaRN> so, do you have an original gerber as well?
[04:12:40] <uw> no but i am looking for one
[04:12:47] <uw> very much so
[04:12:47] <JessicaRN> ahhh...
[04:12:51] <uw> as well as a pick and place
[04:13:00] <JessicaRN> a pnp would be nice
[04:13:11] -!- FinboySlick has quit [Quit: Leaving.]
[04:13:46] <uw> sho would
[04:13:47] <JessicaRN> i used to have a mitsubishi movemaster arm that was designed for pnp. bought it salvage for $200 and sold it for $2500
[04:14:02] <L84Supper> you never hear stories about slightly irked or mildly neurotic scientists, just mad ones
[04:14:11] <JessicaRN> lol
[04:14:25] <uw> haha yea those movemasters
[04:14:41] <uw> wow 2500 is pretty good
[04:15:09] <uw> i would want the arm, but for that profit margin id probably sell it too
[04:15:43] <JessicaRN> this guy was a biology phd who framed houses for a living. his whole home was converted into a lab and tinkerer's workshop. his family had no idea what to do with all the stuff and i was there at the right time. i made an offer for the whole lot.
[04:16:19] <uw> awesome, any pics?
[04:16:37] <uw> i recently did a simlar thing to a guy who used to work at westinghouse
[04:16:56] <JessicaRN> i have about 4 centerfuges, a few spectrometers, etching tanks, the gerber, the SEM, a sputter coater, and a ton more
[04:17:06] -!- Valen has quit [Quit: Leaving.]
[04:17:25] <JessicaRN> no pics posted now, but i'll be posting soon. want to sell a bunch of it.
[04:17:32] <mozmck> uw: I have a couple pick and place machines I need to get rid of
[04:17:34] <L84Supper> have you tried the SEM yet?
[04:17:41] <JessicaRN> i have a nice chemistry fume hood I'm selling soon
[04:17:48] <uw> mozmck, where are you located just curious?
[04:17:55] <mozmck> north texas
[04:18:01] <JessicaRN> sold the SEM first off. it paid for everything else
[04:18:06] <L84Supper> JessicaRN, where are they located? (the hoods)
[04:18:11] <JessicaRN> Indiana
[04:18:15] <JessicaRN> I have just one
[04:18:19] <L84Supper> oh really
[04:18:24] <JessicaRN> yeah
[04:18:32] <L84Supper> <--- Chicago
[04:18:40] <L84Supper> what size hood?
[04:18:43] <uw> mozmck, rats, a little far for me (nyc area) do you know the make/model?
[04:18:51] <JessicaRN> sec, i'll get the specs
[04:19:51] <JessicaRN> L84Supper: it looks like this one: http://www.ebay.com/itm/Kewaunee-Scientific-Air-Flow-Fume-Hood-38-KSE-k-s-e-lAB-/190532376221
[04:20:32] <JessicaRN> it's yours for 8 bills if you wanna come get it
[04:20:55] <JessicaRN> i'm 4.5 hours from the southside of chi
[04:21:13] <mozmck> uw: panasonic CM62P
[04:21:33] <mozmck> Here are some pictures: http://www.mcknight-instruments.com/zenphoto/other/pick-and-place/
[04:21:39] <L84Supper> too small for me
[04:21:44] <JessicaRN> shame
[04:22:19] -!- elmo40 has quit [Quit: Leaving.]
[04:23:08] <mozmck> bbl
[04:26:20] <JessicaRN> L84Supper: you need any other lab stuff?
[04:26:56] <uw> JessicaRN, did you get any chemicals?
[04:27:08] <L84Supper> JessicaRN, high shear mixers, viscometers, stainless tanks
[04:27:15] <JessicaRN> yeah, a bunch of etchant stuff
[04:28:15] <L84Supper> ferric chloride?
[04:28:33] <uw> nitric acid?
[04:28:42] <JessicaRN> L84Supper: yeah, like a 5 gal jug of powder.
[04:29:08] <JessicaRN> L84Supper: I have a few large dewars. could you use those?
[04:29:12] -!- vladimirek [[email protected]] has joined #linuxcnc
[04:29:37] <JessicaRN> uw, no nitric
[04:30:02] <uw> ok
[04:30:15] <JessicaRN> i do a lot of my own etching w/ muratic acid
[04:30:40] <djdelorie> mmm... chemicals...
[04:30:51] <JessicaRN> L84Supper: the dewars are stainless
[04:30:53] <L84Supper> also might need some Polymerization Reactors
[04:31:16] <JessicaRN> no idea what those are so i doubt i have them!
[04:34:28] <L84Supper> stainless tanks with lids that are plumed for gases and fluid exchange
[04:34:50] <L84Supper> http://www.godrejped.com/godrej/processEquipment/ProductImages/Polymer-Reactor.jpg
[04:34:55] <JessicaRN> nope. only have the dewars
[04:35:18] <JessicaRN> whatcha makin?
[04:35:26] <L84Supper> polymers
[04:35:37] <JessicaRN> heh
[04:35:43] <JessicaRN> yeah... for what
[04:36:25] <L84Supper> http://www.shcm.es/ing/imagenes_grandes/BAYER%202000.jpg this looks like a fuel tank from a Saturn V
[04:36:53] <L84Supper> JessicaRN, we make photopolymers for 3D printers and also for inks, coatings etc
[04:37:03] <JessicaRN> if you are into that, do you know anything about synthisizing uv curable resins for rp applications? that stuff is SOOO expensive. it would be nice to make it myself
[04:37:20] <L84Supper> heh, how about $40/L?
[04:37:28] <JessicaRN> ahhh... so yes, you do know about that stuff!
[04:37:43] <L84Supper> http://bucktownpolymers.com/polymers.html
[04:37:52] <JessicaRN> $40/L is a pretty good price compared to some I've seen
[04:38:30] <L84Supper> I have hundreds of formulas
[04:39:15] <JessicaRN> can the inexperienced home chemist tackle any of them?
[04:40:20] <L84Supper> DIY heh, sorry no
[04:40:34] <JessicaRN> sux 2 b me
[04:40:48] <L84Supper> safety and also have to buy in large volumes
[04:40:54] <JessicaRN> yeah
[04:41:06] <toner> oooh
[04:41:12] <JessicaRN> so, what part of chi you in? is bucktown your company?
[04:41:13] <toner> polymer manufacture?
[04:41:14] <L84Supper> they don't like to sell chemicals in small containers unless they are $5000/L then it;s ok
[04:43:12] <L84Supper> http://code.google.com/p/lemoncurry/wiki/main
[04:44:16] <JessicaRN> yeah, i've seen that. sexy
[04:44:42] <JessicaRN> makes cnc milling look like stone tools and sticks
[04:44:55] <JessicaRN> so, what part of chi you in? is bucktown your company?
[04:44:57] <L84Supper> will be printing printed circuit boards from fluids later this year
[04:45:21] <L84Supper> no plating, etching, laminating or drilling
[04:45:31] <JessicaRN> tres cool
[04:45:54] <djdelorie> with through-vias?
[04:46:25] <L84Supper> multilayer with through, blind and buried vias
[04:46:37] <djdelorie> sweet
[04:46:51] <djdelorie> resolution?
[04:47:15] <L84Supper> 1/10 UL
[04:47:29] <djdelorie> ultraliters?
[04:47:36] <L84Supper> heh
[04:47:49] <djdelorie> what's that in trace/space rules?
[04:47:50] <L84Supper> UL is 3 mil trace /space
[04:48:02] <L84Supper> 75um for the metric folks
[04:48:15] <djdelorie> so 0.3mil features. Cool. When will it be ready for other DIY'ers?
[04:48:32] <L84Supper> 5um trace space should be pretty common soon
[04:49:00] <JessicaRN> L84Supper: will you be offering the fab services or just the chemicals?
[04:49:17] <L84Supper> printers and fluids
[04:49:43] <L84Supper> there should be some DIY wikis by the end of the year
[04:50:06] <L84Supper> the main problem with DIY are the chemicals
[04:50:19] <JessicaRN> yeah
[04:50:23] <djdelorie> worse than the usual pcb chemicals?
[04:50:49] <L84Supper> I was a bit surprised by the lack of machine building/design skills
[04:51:01] <L84Supper> actually much safer
[04:51:34] <L84Supper> if you've sen the reprap variations you know what i mean
[04:51:53] <JessicaRN> so, what are your printers gonna run?
[04:51:56] <djdelorie> my lab already includes hcl, cucl, sodium carbonate, sodium hydroxide, stannous boroflourate, and probably a few other things...
[04:52:23] <JessicaRN> djdelorie: you need to buy my fume hood...
[04:52:25] <JessicaRN> ;)
[04:52:30] <L84Supper> so I'm not sure how realistic <5mil trace and space DIY might be, some here should be able to do it, others .... not so much
[04:52:35] <djdelorie> I need to buy ANOTHER fume hood at least
[04:52:42] <djdelorie> the first one didn't survive the acids
[04:52:46] <JessicaRN> lol
[04:53:06] <JessicaRN> http://www.ebay.com/itm/Kewaunee-Scientific-Air-Flow-Fume-Hood-38-KSE-k-s-e-lAB-/190532376221 mine looks like this
[04:53:14] <djdelorie> I do 5/5 traces with UV films and a little care
[04:53:16] <JessicaRN> that is not my listing
[04:54:16] <djdelorie> I just put a bathroom fan in a wooden headboard: http://www.delorie.com/pcb/lab/img_0213.html
[04:54:48] <JessicaRN> i just met a man gonna die of cancer...
[04:55:01] <djdelorie> who, me?
[04:55:10] <JessicaRN> yep!
[04:55:56] <JessicaRN> so will i, prolly.
[04:56:07] <JessicaRN> you live, you die... repeat
[04:56:16] <djdelorie> I don't use that stuff that often. And family medical history disagrees too ;-)
[04:57:09] <JessicaRN> good for you.
[04:57:21] <djdelorie> more likely to die of something else, that's all :-P
[04:58:06] <JessicaRN> my history says I'll be an alcoholic who dies of a heart attack. I guess I'll drink to that
[04:58:33] <JessicaRN> instaling pycam now.
[05:04:32] -!- Fox_Muldr has quit [Ping timeout: 265 seconds]
[05:04:53] <JessicaRN> Thetawaves: you still here? libgdkglext-win32-1.0-0.dll didn't install. do you know where i can find that seperately?
[05:06:12] -!- Fox_Muldr [[email protected]] has joined #linuxcnc
[05:08:05] -!- geografa has quit [Quit: geografa]
[05:29:18] -!- psha[work] [psha[work][email protected]] has joined #linuxcnc
[05:31:24] <JessicaRN> ok, who knows pycam in here?
[05:34:51] cylly is now known as Loetmichel
[05:35:11] <Loetmichel> gmagno: from the headlights
[05:35:14] <Loetmichel> grr
[05:35:18] <Loetmichel> mornin'
[05:35:39] <JessicaRN> mornin'
[05:36:15] <Loetmichel> *yaaaaawn*
[05:36:21] -!- Thetawaves has quit [Quit: This computer has gone to sleep]
[05:37:24] <Loetmichel> bah, i'm getting old. Worked 14hrs yesterday... Today: feeling every single bone. :-(
[05:37:37] <JessicaRN> what kinda work?
[05:39:18] <toastyde1th> speaking of pycam, i really wish someone would bring back APT machine programming
[05:39:33] <toastyde1th> it looks like all the apt projects died in their infancy
[05:39:36] <Loetmichel> computers
[05:40:04] <JessicaRN> i used to work in IT. I'm an ER nurse now. I run my arse off
[05:40:37] <Loetmichel> JessicaRN: hrhr, my mom was 14 years night nurse. I know ;-)
[05:41:07] <JessicaRN> i work 3p~3a, but i -never- leave on time
[05:41:28] <Loetmichel> i know.
[05:42:13] <Loetmichel> like i said: i am getting old. i worked for 10+ years in Stage rental. 410 work hours a month was "normal"
[05:42:36] <JessicaRN> lol
[05:42:43] <JessicaRN> where was that?
[05:43:24] <Loetmichel> ... to qoute Roger murtaugh : " damn, i am to old for this shit!"
[05:43:43] <Loetmichel> in germany
[05:44:44] <JessicaRN> thats a big place. what part? (unlike most americans I know a little about the rest of the world!) ;)
[05:44:58] <Loetmichel> wuppertal
[05:45:30] <JessicaRN> cool. i've been to hamburg, frankfurt, and munich
[05:45:42] <Loetmichel> but as the company was stage rental we had jobs all over germany, even as ar as maroc
[05:45:59] <Loetmichel> far
[05:46:02] <JessicaRN> *nods*
[05:46:29] <JessicaRN> I want to move back to Europe. I think I'll try Italy next.
[05:47:21] <Loetmichel> (that was a nice job, to nuild a stage with laser show and water show in the desert
[05:47:28] <Loetmichel> (west sahara) ;-)
[05:47:32] <Loetmichel> build
[05:47:48] <Loetmichel> in the middle of nowhere ;-)
[05:48:24] <JessicaRN> I saw a great light/water show at planten un blomen hamburg
[05:50:49] <Loetmichel> <. has to get some decent clothes on and go to company, late already ;-)
[05:51:09] <JessicaRN> have fun
[05:51:17] <Loetmichel> .. still sipping on my triple espresso... ;-)
[06:07:00] <JessicaRN> Loetmichel: do you know pycam?
[06:11:05] <Connor> I like CamBam.
[06:11:19] <JessicaRN> free?
[06:11:42] <Connor> No. But really not that bad $$$ wise.. You can use it free for like 40 or so times.
[06:11:57] <Connor> I had a machine that I ran it on for months.. Just left it up all the time.
[06:12:38] <Connor> Very Easy to use.
[06:12:48] <Connor> much easier than most cam's I've tried.
[06:13:10] <JessicaRN> i'm looking to create stls with autodesk 123d catch and the mill them. you think it can do this?
[06:14:07] -!- davec_ has quit [Ping timeout: 240 seconds]
[06:14:33] <Connor> It reads .dxf, gcode, .3ds, .stl and .gbr (Gerber)
[06:15:04] <JessicaRN> hmm... i'll take a look
[06:15:30] <JessicaRN> the pycam importer has choked on every stl i've tried to open
[06:15:55] <Connor> You using it for CNCing or 3D printing ?
[06:16:02] <JessicaRN> cnc
[06:16:25] <JessicaRN> i wish i had a 3d printer
[06:17:18] <Connor> They're fun.. But a pain to get your settings correct.
[06:17:52] <JessicaRN> i want an SLS machine
[06:18:30] <JessicaRN> or sla
[06:18:47] <JessicaRN> either would be fine, if you have one you want to give away
[06:18:49] <JessicaRN> ;)
[06:19:13] <Connor> I just have a cupcake makerbot..
[06:19:34] <djdelorie> are we back to "building cars with vats of metal powder and big lasers" ?
[06:20:09] <JessicaRN> i dont really like the filament process
[06:20:14] <JessicaRN> hi djdelorie
[06:20:24] <dhoovie> JessicaRN: you could build a lemoncurry
[06:20:25] <dhoovie> http://code.google.com/p/lemoncurry/wiki/main
[06:20:36] <JessicaRN> yeah
[06:20:49] <JessicaRN> nice, but the chemicals are so expensive
[06:20:56] <JessicaRN> i just need to be rich
[06:21:02] <JessicaRN> or marry into money
[06:21:04] <dhoovie> the guy sells it for 50$ a litre i think
[06:21:08] <JessicaRN> *grins*
[06:21:50] <dhoovie> or someone does.... somewhere....
[06:21:52] <dhoovie> :D
[06:22:52] -!- cevad [[email protected]] has joined #linuxcnc
[06:23:15] <JessicaRN> ok, gonna try cambam.
[06:23:49] -!- jpk has quit [Ping timeout: 260 seconds]
[06:23:55] <JessicaRN> dunno if i'm wasting my time. a friend is gonna let me use his 2nd seat of bobcam. dunno if that is any good or not. any thoughts.
[06:24:05] <dhoovie> cambam is great. for 2.5d things
[06:24:21] <dhoovie> never used it for anything else though
[06:25:31] <JessicaRN> only 2.5d?
[06:25:35] <JessicaRN> sucky
[06:25:54] <toastyde1th> most cheap cam packages are shit at everything that isn't 2.5d
[06:26:11] <JessicaRN> anyone used bobcam?
[06:26:22] <dhoovie> yup, tbh never used it for 3d. may work. may....
[06:26:39] <JessicaRN> you likey?
[06:28:03] <toastyde1th> JessicaRN, what exactly are you doing that you care about 3d toolpaths
[06:28:03] -!- draig_ has quit [Read error: Connection reset by peer]
[06:28:18] -!- draig [[email protected]] has joined #linuxcnc
[06:28:18] <toastyde1th> also we might have different definitions of 2.5d
[06:28:32] <JessicaRN> i want to use this mill for sculptural pieces.
[06:28:57] <L84Supper> whats the current price of mastercam?
[06:29:10] <JessicaRN> i'm going to scan found objects using 123d catch and then blend/merge them into art pieces.
[06:29:10] <mrsun> your soul and left foot ?
[06:29:11] <L84Supper> $10K +
[06:29:32] <toastyde1th> JessicaRN, do you have a specific toolpath that you are a looking for?
[06:29:48] <toastyde1th> because on a 3 axis mill, almost every single cam package is going to use a 2.5d toolpath to do contouring
[06:30:10] <JessicaRN> so, just no undercuts?
[06:30:38] <JessicaRN> I'd like to be able to rotate my pieces to get a full 3d cut.
[06:30:58] <toastyde1th> full rotation/undercutting needs a 5+ axis machine, which is why i was curious
[06:31:07] <L84Supper> dhoovie, expensive? the photopolymers are the same price as PLA and dropping
[06:31:31] <JessicaRN> or it needs a 3d machine and someone to manually rotate the piece!
[06:31:41] <toastyde1th> once you have 4 or more axes, then you have a little bit of choice over what kind of toolpath you use
[06:33:03] <JessicaRN> i was under the impression that some of the better apps would allow you to manually rotate your piece and then continue cutting using the same model. am i wrong about this?
[06:33:19] <toastyde1th> no no, you're correct - that's a very standard operation
[06:33:38] <toastyde1th> what I'm referring to is how the machine actually goes about cutting the 3d feature
[06:34:11] <JessicaRN> so, toastyde1th would that be a 2.5 or a full 3d cut?
[06:34:21] <toastyde1th> you can contour with a 2.5d cut
[06:34:41] <toastyde1th> the 2.5d just means the machine goes in a staight line, like X, and moves Z up and down to make the profile
[06:34:42] <JessicaRN> and then rotate and contour another face?
[06:34:46] <toastyde1th> then bumps y up
[06:34:52] <toastyde1th> and makes another pass in X and Z
[06:34:55] <JessicaRN> ahhh
[06:34:56] <JessicaRN> ok
[06:34:59] <toastyde1th> and just keeps doing this until your part is cut
[06:35:19] <JessicaRN> still do complex curves in all three axis?
[06:35:26] <toastyde1th> yes, up to a point
[06:35:42] <JessicaRN> ok, so, just basically no undercutting?
[06:35:50] <toastyde1th> you can undercut with a spherical endmill
[06:35:53] <dhoovie> L84Supper: yeah :D and i love the fact its dropping. hmmm..... moar quality
[06:36:11] <toastyde1th> but you'd have to look at your specific cam package to see if it supports that kind of thing
[06:36:16] <JessicaRN> ok. yeah, i see that
[06:36:36] <JessicaRN> sheesh. i wish i could apprentice with someone
[06:36:36] <toastyde1th> some cam packages handle special endmill shapes, others don't
[06:36:47] <JessicaRN> what do you use?
[06:36:55] <toastyde1th> and i don't have enough exp with cam packages to help, all my exp is with hand-coding in a production environment
[06:36:59] <L84Supper> dhoovie, the old patent holders did nothing for over 20 years, now it's time for a change
[06:37:25] <JessicaRN> you write gcode from scratch toastyde1th ?
[06:37:33] <dhoovie> i like change. change is good. especially when it benefits everyone.
[06:37:41] <toastyde1th> JessicaRN, yes, but it's for parts, not for sculpture/etc
[06:37:58] <toastyde1th> so there's no complex surfaces or contours, it's all straight lines, angles, and circles
[06:38:11] <JessicaRN> how does one code for a curve in 3 axis? like a screw helix?
[06:38:18] <toastyde1th> g2/g3
[06:38:50] <toastyde1th> you tell the machine the two axes that will be the circular motion, and which will be linear
[06:38:52] <JessicaRN> sheesh. i doubt my geometry is that good!
[06:38:53] <dhoovie> also, PLA is sometimes a pain in the butt. and extruders are fussy sometimes. and i hate stringing! but I doubt i will get cheap UV cure resin in this part of the world
[06:38:55] <dhoovie> which sucks
[06:38:58] <toastyde1th> JessicaRN, it's not geometry
[06:39:14] <toastyde1th> gcode is pretty well designed for circular/helical moves
[06:39:14] <JessicaRN> what is it then?
[06:39:27] <L84Supper> dhoovie, what part of the world is that?
[06:39:36] <dhoovie> india :D
[06:39:45] <L84Supper> no problem
[06:39:46] <toastyde1th> it's just putting the machine into the right modes, moving it to the start of the cut, then telling it what kind of cut you're making
[06:39:53] <dhoovie> you'll get resin for sure. but they are going to charge for it
[06:39:59] <JessicaRN> well, so far the only gcode i have written is the really basic g0 stuff
[06:40:11] <L84Supper> dhoovie, give it 6 months
[06:40:18] <toastyde1th> g2/g3 tell the machine to move in an arc
[06:40:23] <toastyde1th> so that you can cut a circle
[06:40:29] <JessicaRN> i guess i need a good gcode tutorial
[06:40:39] <toastyde1th> if you are cutting a circle in X/Y, but tell it to move in Z at the same time
[06:40:46] <JessicaRN> can you suggest a good reference?
[06:40:47] <toastyde1th> it will move in a line in Z, not circular
[06:40:52] <toastyde1th> I learned it the hard way =(
[06:40:56] <dhoovie> well, i still don't have a decent source for abs. unless i import. or I havn't found one. Sooooo.... I don't think I'll be holding my breath
[06:40:59] <L84Supper> dhoovie, whats the import tax from China?
[06:41:05] <toastyde1th> co-worker taught me the basics, then i read the Fanuc manual
[06:41:16] <toastyde1th> i also went to a votech program
[06:41:30] <dhoovie> I really havn't checked to be honest. But it's usually about 20-25%
[06:41:34] <dhoovie> for most things
[06:41:35] <JessicaRN> fanuc?
[06:41:38] <toastyde1th> i am sure there are some good gcode references in the emc wiki
[06:41:46] <toastyde1th> Fanuc is the de facto standard machine control
[06:41:51] <JessicaRN> sounds like an Italian swear word
[06:41:55] <L84Supper> dhoovie, if we find the right partner there we can make it in India
[06:42:20] <JessicaRN> "fanuc you, buddy!"
[06:42:22] <L84Supper> dhoovie, $40 + 25% = $50
[06:42:24] <toastyde1th> haha
[06:42:27] <L84Supper> so not too bad
[06:42:42] <toastyde1th> the one bad thing about knowing fanuc gcode is that emc gcode is fairly different
[06:42:47] <dhoovie> plus shipping? it doesnt turn out cheap in the end. but yeah i guess it's not too bad
[06:42:50] <toastyde1th> it's actually different from most manufactuer controls
[06:43:40] <JessicaRN> Shhh... don't tell anyone, but I'm also using another tool besides EMC
[06:43:46] <JessicaRN> *grins*
[06:43:47] <L84Supper> dhoovie, several components we use for resin is actually made in India, we just need a small factory
[06:43:50] <toastyde1th> lol
[06:44:19] <dhoovie> really? well I hope it happens.
[06:44:40] <dhoovie> and I hope they sell it cheap to the smaller guys :D who only want maybe 10 litres :D
[06:45:08] <L84Supper> dhoovie, most offers from India so far have been a bit sad, but we have been focusing on China, India is next
[06:45:22] -!- DJ9DJ [DJ9DJ!~Deejay@unaffiliated/dj9dj] has joined #linuxcnc
[06:45:41] <dhoovie> yeah, business in India isn't great
[06:45:48] <DJ9DJ> moin
[06:45:48] <JessicaRN> i'm trying cambam now. since i'm running it in a vm, i guess i never have to shut it down. so much for the 40 run limit
[06:46:00] <dhoovie> if i want to buy a mill in India, its double the price for the same one in america :(
[06:46:03] <dhoovie> it's sad
[06:46:16] <L84Supper> dhoovie, trying to get government involvement
[06:46:20] <JessicaRN> india? did any of you see the film "outsourced"? great comedy
[06:46:32] <L84Supper> great film
[06:46:34] <dhoovie> yeah, it was funny.
[06:46:46] <dhoovie> L84Supper: it would be GREAT if you did
[06:47:11] <dhoovie> and if something happened. it would be awesome
[06:47:30] <L84Supper> dhoovie, we have made inroads in the past for printers and cable TV. broadband etc
[06:47:31] <dhoovie> tbh, if you can find the right person to work with it's fairly easy in india
[06:47:53] <dhoovie> but.... you need to find the right person to help you in india
[06:48:04] <dhoovie> L84Supper: in india? sweet!
[06:48:06] <L84Supper> but corruption got in the way, we just need the right connections and partners
[06:48:30] <dhoovie> L84Supper: haha yeah you need to know how to 'play' the system.
[06:48:56] <L84Supper> it generally involves some 20%+ non income generating "partner" to move ahead
[06:48:58] <dhoovie> and by that i don't mean just giving in to corruption. but generally being able to deal with people here
[06:49:09] <Connor> JessicaRN: Exactly how I do it.. I run it in a VM too. :)
[06:49:15] <JessicaRN> L84Supper: sounds like China. I had a bitch of a time trying to do business there. always "ok ok!" but never any results
[06:49:30] <dhoovie> JessicaRN: ohhh its worse
[06:49:32] <JessicaRN> Connor: great minds think alike!
[06:49:56] <L84Supper> JessicaRN, you just need the right partners
[06:50:08] <JessicaRN> Ok, Mr Toad...
[06:50:23] <L84Supper> we just got a factory for free there
[06:50:32] <dhoovie> seriously if anyone wants to do business in india. its a bloody pain. but theres lots of oppurtunite here
[06:50:55] <JessicaRN> Connor: in cambam, how do you specify the tool geometry?
[06:51:04] <dhoovie> Mr. Toad was awesome. loved the part where he goes to eat food with the dhobi (i.e. washerman)
[06:51:05] <dhoovie> was awesome
[06:51:14] <dhoovie> ok gtg be back later
[06:51:18] <dhoovie> cya
[06:51:20] <JessicaRN> ciao
[06:52:45] -!- uw has quit [Changing host]
[06:52:45] -!- uw [uw!~uw@unaffiliated/uw] has joined #linuxcnc
[06:52:57] <L84Supper> JessicaRN, it's like Indiana without the faux capitalists
[06:53:00] <Connor> After you define the machine operation.. You go in to the options of operation and set the type of tool..
[06:53:32] <Connor> what type of endmill you using ?
[06:53:51] <JessicaRN> lol @ L84Supper
[06:54:07] <JessicaRN> Connor: dunno yet. I have a lot of choices
[06:54:18] <JessicaRN> probably a small ball mill
[06:54:29] <Connor> I think Bull nose or ball is in it..
[06:55:16] <Connor> All kinds of Tutorials online and a forum.. I mostly use it for 2.5d stuff..
[06:55:40] <JessicaRN> conner, i just imported a part i d/led from 123d catch, but its orientation is screwy. how can i reorient the part?
[06:56:09] <L84Supper> JessicaRN, China is a bit like Soylent Green with some humanity, they are the true capitalists
[06:56:14] <Connor> Orientation screw in what way? Rotated wrong?
[06:56:31] <JessicaRN> IT'S PEOPLE!!!
[06:56:40] <Connor> I think you can select the whole part using the shift button and highlight..
[06:57:25] <JessicaRN> Connor: the part I d/led is a wall hanging. its default orientation is vertical but for milling I want it to be hort.
[06:57:57] <Connor> highlight the whole part.
[06:58:12] <Connor> edit transform.
[06:58:24] <L84Supper> hmm so lets see, communists that are actually capitalists, and we have a supposed democratic republic turned fascist.... but don't tell anybody
[06:58:25] <Connor> and you should be able to rotate it
[06:58:44] <JessicaRN> hmmm. i cant see to select it
[06:59:11] <Connor> hold down alt key and use the mouse to rotate the axis
[06:59:15] <JessicaRN> it does -act- like i'm selecting it.
[06:59:24] <Connor> it should turn red.
[06:59:44] <JessicaRN> that just rotates the viewing axis
[07:00:23] <L84Supper> anyone try the comedi + EMC stuff?
[07:00:27] <JessicaRN> even "select all" doesnt turn it red
[07:01:23] <Connor> I'm not sure how to rotate it like that...
[07:01:39] <Connor> might be easier to do it in the CAD package and save it back out.
[07:01:41] <JessicaRN> foo
[07:01:52] <JessicaRN> ok
[07:04:41] <Connor> rotate will do it I think..you may have to use the X y or Z buttons on keyboard to select the correct axis to rotate around...
[07:05:39] <JessicaRN> Connor: Here is the part I'm playing with: http://www.123dapp.com/obj-Catch/Sun-Face/725400
[07:05:59] <JessicaRN> I'm trying to get it to lay flat on the xy
[07:06:25] <Connor> I don't have account to download it with.
[07:06:40] <JessicaRN> ok
[07:07:36] <Connor> But, I see what your saying. They have it hanging on the wall.. and you need laying flat on the "table" :)
[07:07:57] <Connor> Would be trivial in Inventor to rotate it.
[07:08:18] <JessicaRN> dont have inventor
[07:08:20] <Connor> Dang.. it's past 3am. Need to get into bed.
[07:08:27] <JessicaRN> yeah, me too
[07:08:33] <Connor> g'night.
[07:08:35] <JessicaRN> you also in EST
[07:08:39] <JessicaRN> g'night
[07:08:40] <Connor> Yea.
[07:08:41] <DJ9DJ> gn8 :)
[07:08:43] <JessicaRN> ty for the help
[07:08:45] <DJ9DJ> its 9 am here :)
[07:08:51] <Connor> But, I work day job. :)
[07:09:02] <JessicaRN> ciao
[07:09:06] <Connor> Fortunately.. I own the Business... so.. I can get up when I want.
[07:09:20] -!- JT-Shop-2 has quit [Ping timeout: 246 seconds]
[07:09:41] -!- jthornton_ has quit [Ping timeout: 246 seconds]
[07:14:00] -!- geografa has quit [Quit: geografa]
[07:16:18] -!- grogan [[email protected]] has joined #linuxcnc
[07:19:14] -!- mhaberler [[email protected]] has joined #linuxcnc
[07:21:29] -!- grogan has quit [Quit: Leaving]
[07:22:32] -!- DJ9DJ has quit [Quit: reboot, brb]
[07:24:07] -!- draig has quit [Quit: draig]
[07:25:34] <JessicaRN> g'nite all. it's late, i'm tired, and the wine is all gone
[07:25:47] -!- DJ9DJ [DJ9DJ!~Deejay@unaffiliated/dj9dj] has joined #linuxcnc
[07:25:54] <DJ9DJ> re
[07:26:14] -!- JessicaRN has quit [Quit: Page closed]
[07:53:18] -!- draig [[email protected]] has joined #linuxcnc
[07:54:08] -!- rob_h [[email protected]] has joined #linuxcnc
[08:06:01] -!- pjm__ has quit [Quit: TTFO]
[08:07:34] -!- JT-Shop [[email protected]] has joined #linuxcnc
[08:07:41] -!- jthornton [[email protected]] has joined #linuxcnc
[08:18:49] -!- linuxcnc-build has quit [Ping timeout: 252 seconds]
[08:35:09] -!- phantoxe [[email protected]] has joined #linuxcnc
[08:37:08] <anonimas1> lunch! :D
[08:56:01] -!- pjm [[email protected]] has joined #linuxcnc
[08:58:16] <Tom_itx> anonimas1
[08:58:32] <Tom_itx> finally loaded that lathe package and played with it last night
[08:59:29] -!- sumpfralle [[email protected]] has joined #linuxcnc
[09:00:12] -!- sumpfralle1 [[email protected]] has joined #linuxcnc
[09:31:38] -!- sumpfralle has quit [Quit: Leaving.]
[09:32:07] <anonimas1> Tom_itx: how did that go?
[09:32:20] <Tom_itx> so far good
[09:32:33] <anonimas1> Tom_itx: i never bother hand coding anymore other then mill parts that's simple
[09:33:18] <Tom_itx> i had to load my machine post files for the lathe as i never had them installed
[09:33:43] <Tom_itx> i picked a generic machine post
[09:33:44] <anonimas1> tho i spent like 2 weeks getting my post to a decent stage where i dont have to worry about it
[09:34:08] <Tom_itx> if i saw a lathe file for linuxcnc i could fix one pretty easy
[09:34:38] <Tom_itx> does yours use G96?
[09:34:48] <Tom_itx> constant surface speed...
[09:35:06] <anonimas1> yes
[09:35:24] <Tom_itx> i think most lathes do
[09:35:35] <anonimas1> only thing not working is the drill cycle so i post that as separate moves
[09:35:54] <anonimas1> the fanuc manuals are abysmal.
[09:36:15] <Tom_itx> heh
[09:36:41] <Tom_itx> i found my old okuma lathe pocket reference the other day
[09:36:44] <anonimas1> as i didnt have a drill chuck when i were working on the post it werent a big deal
[09:37:05] <anonimas1> but all other canned cycles works as expected
[09:37:18] <Tom_itx> have you tried rigid tapping with it?
[09:37:35] <anonimas1> too old control im planning on making a floating chuck for that
[09:38:00] <Tom_itx> get a reversing head for it
[09:38:07] <anonimas1> i have one :)
[09:38:24] <anonimas1> but it's too big to fit the lathe
[09:38:29] <anonimas1> (long)
[09:38:33] <Tom_itx> you don't like it?
[09:38:40] <Tom_itx> oh
[09:39:01] <anonimas1> can only have like 300mm tools sticking out from the turret or else the wall will be near
[09:39:39] <anonimas1> i have only 6 toolspots so space is premium
[09:39:47] <anonimas1> i'll build a rear turret someday
[09:39:51] <anonimas1> err second.
[09:39:55] <Tom_itx> bbl, gotta do a few things here
[09:40:18] <anonimas1> got the plc to send serial commands to another plc to handle things like bar pulling too
[09:40:26] <anonimas1> so i can customize whatever i like
[09:40:28] <anonimas1> :)
[09:40:31] <anonimas1> macro b is neat
[09:42:15] -!- erictheise has quit [Quit: erictheise]
[09:44:35] <anonimas1> I am reassembling the spindle for the big mill now
[09:44:36] <anonimas1> :)
[10:21:37] -!- HighSpeedLowDrag has quit [Ping timeout: 240 seconds]
[10:23:13] -!- draig has quit [Read error: Connection reset by peer]
[10:23:28] -!- draig [[email protected]] has joined #linuxcnc
[10:26:15] -!- Mourner has quit [Ping timeout: 245 seconds]
[10:35:28] -!- vladimirek has quit [Remote host closed the connection]
[10:37:39] -!- mhaberler has quit [Quit: mhaberler]
[10:38:26] -!- Valen [[email protected]] has joined #linuxcnc
[11:07:34] -!- phantoxe has quit [Read error: Connection reset by peer]
[11:07:54] -!- phantoxe [[email protected]] has joined #linuxcnc
[11:17:09] <Tom_itx> anonimas1 how'd you finally get the bearings off?
[11:17:59] <Tom_itx> JT-Shop i have a couple files you can look at if you want
[11:20:08] <r00t4rd3d> today i am going to build a 20' atv draw bridge
[11:20:24] <r00t4rd3d> alone
[11:20:44] -!- servos4ever [servos4ever!~chatzilla@74-47-247-180.dr01.hnvr.mi.frontiernet.net] has joined #linuxcnc
[11:21:47] <r00t4rd3d> me and my buddy backhoe
[11:40:25] -!- Mourner has quit [Ping timeout: 245 seconds]
[11:49:39] -!- sumpfralle1 has quit [Read error: Operation timed out]
[11:58:13] -!- mk0 [[email protected]] has joined #linuxcnc
[12:04:16] <Loetmichel> *Phew*
[12:05:56] <Loetmichel> QA from customer done... 120 systems ready for shipment... AM i relived... now i have so start with the 300 of the next batch ;-)... but not in 14 hrs shifts ;-)
[12:13:58] <mazafaka> What? Have you installed 300 copies of Windows?
[12:14:49] <mazafaka> r00t4rd3d: What? Bridge for ATV?
[12:16:31] -!- dhoovie has quit [Read error: Connection reset by peer]
[12:17:55] <Loetmichel> MarkusBec: no, no OS
[12:17:58] <Loetmichel> grrr
[12:18:01] <Loetmichel> mazafaka
[12:18:56] <Loetmichel> 500 dell comperts converted to dust protected and emi shielded
[12:19:02] <Loetmichel> cpmuters
[12:19:06] <Loetmichel> computers
[12:19:32] <Loetmichel> 120 done, next batch 300
[12:19:48] <r00t4rd3d> how did you dust protect them?
[12:20:00] <r00t4rd3d> just filter material on the fans, openings?
[12:20:10] <Loetmichel> http://www.cyrom.org/palbum/main.php?g2_itemId=13447&g2_imageViewsIndex=1
[12:21:17] <r00t4rd3d> heh
[12:21:25] <r00t4rd3d> so somewhat dust protected :)
[12:22:21] <Loetmichel> in the aluminium shell is a dust filter like the ones in kitchen exhausts
[12:23:23] <r00t4rd3d> youve blocked off the normal intakes, now it will suck harder on the cracks that are still open
[12:23:59] <Loetmichel> there is nothing blocked. the filter is nearly withoudt drag
[12:24:18] <Loetmichel> and the "ohter cracks" are shut with copper/aluminium foil tape
[12:24:25] <Loetmichel> for EMI reasoins
[12:24:38] <Loetmichel> the filter frame is teh only intakle left ;-)
[12:25:20] <TekniQue> http://www.f1-2000.co.uk/
[12:25:29] <r00t4rd3d> turn one on, take a hand full of saw dust and sprinkle down over top of it then open it
[12:25:30] <TekniQue> some impressive handiwork
[12:26:54] <Loetmichel> r00t4rd3d: did
[12:27:00] <Loetmichel> no holes left
[12:28:47] <mazafaka> How do you fix the coil on the plastic?
[12:33:11] <mazafaka> Oh, it's tape? but is it reliable and durable?
[12:34:55] -!- psha[work] has quit [Quit: leaving]
[12:35:12] <mazafaka> So it creates larger inner pressure usinf air coming through the filter and therefore does not take any dust inside?
[12:35:42] <mazafaka> Why not just super-duper computer with no fans at all? :)
[12:39:49] -!- mozmck has quit [Quit: Leaving.]
[12:40:18] -!- factor has quit [Ping timeout: 264 seconds]
[12:42:27] -!- Tom_itx has quit [Ping timeout: 252 seconds]
[12:57:09] -!- factor [factor!~factor@r74-195-185-246.msk1cmtc01.mskgok.ok.dh.suddenlink.net] has joined #linuxcnc
[12:59:26] -!- micges [[email protected]] has joined #linuxcnc
[13:00:06] -!- FinboySlick [[email protected]] has joined #linuxcnc
[13:00:33] -!- SWPadnos has quit [Changing host]
[13:00:33] -!- SWPadnos [SWPadnos!~Me@emc/developer/SWPadnos] has joined #linuxcnc
[13:00:33] -!- mode/#linuxcnc [+v SWPadnos] by ChanServ
[13:07:58] -!- mozmck [mozmck!~moses@client-74.117.92.175.dfwtx.partnershipbroadband.com] has joined #linuxcnc
[13:10:32] <Valen> Loetmichel: use polycarb not acrylic lol
[13:10:43] -!- draig has quit [Read error: Connection reset by peer]
[13:12:19] -!- skunkworks [[email protected]] has joined #linuxcnc
[13:33:15] <skunkworks> yay - rain!
[13:36:43] -!- mk0 has quit [Ping timeout: 252 seconds]
[13:40:34] -!- yangchang [[email protected]] has joined #linuxcnc
[13:43:35] -!- vladimirek [[email protected]] has joined #linuxcnc
[13:45:56] <micges> skunkworks: after how many days?
[13:46:26] <skunkworks> well - we have been getting spiratic rain - but this is the firs one in a while that has amounted to anything
[13:49:00] <micges> here we had F2 tornado 100km from here
[13:49:29] <micges> F2 was not seen here for decades
[13:49:40] <micges> crazy weather
[14:07:45] -!- Thetawaves [[email protected]] has joined #linuxcnc
[14:16:10] -!- mhaberler [[email protected]] has joined #linuxcnc
[14:22:04] -!- micges has quit [Quit: Leaving]
[14:22:21] -!- micges [[email protected]] has joined #linuxcnc
[14:22:45] -!- caveira [[email protected]] has joined #linuxcnc
[14:26:34] -!- dgarr [[email protected]] has joined #linuxcnc
[14:30:10] -!- ScribbleJ [[email protected]] has joined #linuxcnc
[14:32:20] -!- syyl [[email protected]] has joined #linuxcnc
[14:33:26] <skunkworks> crazy
[14:35:11] -!- Valen has quit [Quit: Leaving.]
[14:38:27] -!- Tom_itx [Tom_itx!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[14:39:33] -!- Thetawaves has quit [Quit: This computer has gone to sleep]
[14:39:48] <Loetmichel> va: if it only were acrylic... its styrol
[14:40:03] <Loetmichel> valen already gone
[14:40:47] <Loetmichel> so, just got to make a photo of the finished cpu box;-) -> http://www.cyrom.org/palbum/main.php?g2_itemId=13450
[14:41:09] <Loetmichel> ... times 500 ... 120 done, 380 to go ;-)
[14:41:55] <JT-Shop> you making the cover plate?
[14:42:15] <Loetmichel> the3 air filter and some internal modifications
[14:42:27] <JT-Shop> nice
[14:47:34] <JT-Shop> Tom_itx: I'm here now
[14:47:49] <JT-Shop> or rather in and out
[14:50:19] -!- mhaberler has quit [Quit: mhaberler]
[14:54:29] -!- mhaberler [[email protected]] has joined #linuxcnc
[14:58:04] <anonimas1> Tom_itx: yeah once i took a real hammer. :)
[15:06:18] -!- mhaberler has quit [Quit: mhaberler]
[15:11:28] -!- Aldo_ has quit [Quit: Page closed]
[15:20:12] -!- chillly has quit [Quit: Leaving]
[15:50:01] -!- mazafaka has quit [Ping timeout: 255 seconds]
[15:55:20] -!- sumpfralle [[email protected]] has joined #linuxcnc
[16:14:28] <anonimas1> surface finishes looks 100 times better now :)
[16:21:15] <JT-Shop> spindle back together?
[16:29:32] -!- Adventsparky has quit [Quit: KVIrc 4.1.3 Equilibrium http://www.kvirc.net/]
[16:30:13] <anonimas1> yep
[16:30:35] <anonimas1> all cleaned and greased up and i adjusted the preload to keep the spindle from getting stuck when hot
[16:31:47] <JT-Shop> nice
[16:32:53] <anonimas1> i still have micro streaks though, and i dont know why
[16:34:55] <jdh> what's a microstreak? (other than the obvious)
[16:35:08] <anonimas1> a line appearing no a milled surface
[16:35:53] <syyl> a microsteak?
[16:36:06] <syyl> something you wont bring to a bbq
[16:36:09] <anonimas1> very small ones
[16:36:53] <Jymmm> syyl: For anorexic models
[16:37:07] <Jymmm> makes it easier to vomit it back up
[16:37:25] <jdh> I was thinking 'nude midget running by'
[16:37:27] <anonimas1> http://ah.io23.net/ul/files/IMG_6290%5b1%5d.JPG
[16:37:28] <syyl> thats bizzare
[16:37:35] <anonimas1> like that on the side the dots showing up
[16:38:08] <syyl> hm
[16:38:17] <syyl> chips that get cought and pulled trough again?
[16:38:46] <syyl> doesnt look like a systematic error in the surface
[16:39:36] <anonimas1> flood coolant should keep that from happening
[16:39:49] <syyl> mh yes
[16:39:53] <syyl> works at least for me ;)
[16:40:10] <JT-Shop> are you using a dead sharp insert for aluminum?
[16:41:05] <Jymmm> jdh: If a midget gets a boob job, does that still make her a B-Cup in the regular world?
[16:41:28] <anonimas1> no :) im using a carbide insert cutter
[16:41:33] <anonimas1> (at the moment)
[16:41:40] <anonimas1> i'll try a new endmill tomorrow.
[16:42:18] <JT-Shop> they make inserts for aluminum and they are sharp as a razor
[16:42:27] <JT-Shop> and leave a nice finish
[16:42:44] <syyl> we might call it mirror finish
[16:42:56] <syyl> or get a good endmill for aluminum
[16:45:50] <syyl> with no or a special coating for aluminum...
[16:46:43] <anonimas1> theese inserts are of grade f40m
[16:47:16] <anonimas1> for steel and superalloys :D
[16:47:49] <syyl> mh, almost perfect for aluminum ;)
[16:48:00] <syyl> it might squeeze the alumium more than it actualy cuts..
[16:51:11] -!- phantoxe has quit []
[16:51:30] <anonimas1> the solid ones i didnt try are suitable for al to..
[16:54:43] -!- draig [[email protected]] has joined #linuxcnc
[17:00:29] -!- b_b has quit [*.net *.split]
[17:00:29] -!- micges has quit [*.net *.split]
[17:00:29] -!- DJ9DJ has quit [*.net *.split]
[17:00:30] -!- Skurlat has quit [*.net *.split]
[17:00:30] -!- Loetmichel has quit [*.net *.split]
[17:00:30] -!- L84Supper has quit [*.net *.split]
[17:00:30] -!- bartek has quit [*.net *.split]
[17:00:31] -!- steves_logging has quit [*.net *.split]
[17:01:55] -!- micges [[email protected]] has joined #linuxcnc
[17:02:38] -!- Loetmichel [[email protected]] has joined #linuxcnc
[17:02:38] -!- L84Supper [[email protected]] has joined #linuxcnc
[17:02:38] -!- steves_logging [[email protected]] has joined #linuxcnc
[17:04:26] -!- IchGuckLive [[email protected]] has joined #linuxcnc
[17:04:54] -!- DJ9DJ [DJ9DJ!~Deejay@unaffiliated/dj9dj] has joined #linuxcnc
[17:05:14] <IchGuckLive> hi all B)
[17:07:34] <DJ9DJ> huhu
[17:07:50] <IchGuckLive> O.O
[17:08:25] <IchGuckLive> Loetmichel: ?
[17:09:00] <IchGuckLive> Loetmichel: do you know where to buy 30uf kondenser for motoe Steinmetzschaltung in germany
[17:09:52] -!- bootnecklad [[email protected]] has joined #linuxcnc
[17:12:26] <archivist> I get motor capacitors off ebay
[17:12:53] -!- sumpfralle has quit [Ping timeout: 248 seconds]
[17:14:15] -!- bootnecklad [[email protected]] has parted #linuxcnc
[17:16:05] <IchGuckLive> archivist: Thanks
[17:45:11] -!- psha [[email protected]] has joined #linuxcnc
[17:47:07] -!- motioncontrol [motioncontrol!~io@host63-92-dynamic.20-87-r.retail.telecomitalia.it] has joined #linuxcnc
[17:53:51] <Jymmm> I have limited room on a package for copy. Do you think it would be "okey" to have someone dl a pdf with the detailed instructions instead of trying to include additional information on/in the package itself?
[17:54:45] <archivist> pdf, are out of your mind
[17:54:58] <Jymmm> archivist: ?
[17:55:21] <archivist> think little old lady never used internet or computer
[17:55:30] <alex4nder> Jymmm: include a quick start at minimum, i'd think
[17:56:33] <Jymmm> alex4nder: BASIC instruction will be on the package, but to fully utilize the product would need to read or view the videos
[17:56:43] <alex4nder> nice
[17:56:48] <alex4nder> I like my instructions written in BASIC
[17:56:55] <alex4nder> 10 Open Box
[17:57:04] <alex4nder> 20 Plug into Wall
[17:57:16] <Jymmm> alex4nder: Well, if your going there, then I'd use BF for that =)
[17:58:03] <Jymmm> 10 LPRINT CHR$(12)
[17:58:06] <Jymmm> 20 GOTO 10
[17:58:40] <archivist> if one needs a video to use a simple product you are doing it wrong, 100 REDO FROM START
[17:58:43] <Jymmm> and watch the fun!
[17:59:54] <Jymmm> archivist: Simple does not mean there can't be details.
[18:00:39] <archivist> just add a sheet of paper
[18:00:47] <Jymmm> no room
[18:01:16] <archivist> make room
[18:01:22] <Jymmm> cant
[18:01:25] <Tom_itx> JT-Shop you in?
[18:01:26] <archivist> fold paper
[18:01:32] <JT-Shop> yea
[18:01:46] <Tom_itx> did you get your ball end made?
[18:01:57] <JT-Shop> no, I've been sidetracked
[18:02:09] <Jymmm> archivist: There is no room for paper, not even folded, rolled, curled, not bigger, not smaller, no green eggs and ham.
[18:02:20] <Tom_itx> i have a couple files if you wanna look at em. one is a finish cut and the other is 3 or 4 passes and a finish cut
[18:02:28] <JT-Shop> sure
[18:02:31] <Tom_itx> i wasn't sure how big a cut you were taking
[18:02:38] <JT-Shop> CAM cutter comp?
[18:02:50] <JT-Shop> 0.020" DOC
[18:02:51] <Tom_itx> it's only the ball end, not the thread end
[18:03:22] <JT-Shop> right the thread end is made first then the screwed into the fixture
[18:03:29] <JT-Shop> then the ball end it turned
[18:04:41] <Tom_itx> i doubt it has comp, i don't have any working lathe templates but i pulled a generic one to post it
[18:05:14] -!- erictheise_ has quit [Client Quit]
[18:05:15] <Tom_itx> you will need to edit the feed/speed for sure and maybe the first initial move
[18:05:43] <Tom_itx> http://tom-itx.dyndns.org:81/~webpage/cnc/JT-Shop/
[18:06:15] <Tom_itx> i'll post an image of what i have as well. set zero to the end of the ball z is the centerline
[18:06:22] <Tom_itx> err x is
[18:06:57] <Tom_itx> why do you need comp?
[18:08:01] <JT-Shop> I don't need comp, just asked the question wrong I guess
[18:08:39] <Tom_itx> posting image..
[18:09:09] <Tom_itx> if i had a gcode file for your lathe i could fix the template
[18:09:30] <Tom_itx> it's just that i've never used the lathe package
[18:09:45] <IchGuckLive> ok by have a nice day
[18:09:55] -!- IchGuckLive has quit [Quit: ChatZilla 0.9.87 [Firefox 13.0/20120601201853]]
[18:10:06] <Tom_itx> JT-Shop, there's a jpg there now
[18:10:16] <Tom_itx> x z is your zero set point
[18:10:45] <JT-Shop> ok thanks
[18:10:53] -!- motioncontrol has quit [Quit: Sto andando via]
[18:12:49] <Tom_itx> JT-Shop, would you rather start cutting from the left and finish at the ball?
[18:13:02] <Tom_itx> i wasn't sure
[18:13:08] <Tom_itx> it's an easy fix
[18:13:45] <Tom_itx> also how big a step over do you make on each pass?
[18:13:59] <Tom_itx> i think i went .015 over the initial radius comp
[18:14:42] <Tom_itx> the toolpath shown follows the nose radius centerpoint
[18:15:06] <archivist> I would start right and cut left due to material strength reasons
[18:15:39] <Tom_itx> well i did
[18:15:57] <Tom_itx> but the ball tip may finish better if you went the other way, i'm not sure
[18:16:36] <Tom_itx> oh, JT-Shop also what's the hex material size? i figured 3/8"
[18:17:33] <Tom_itx> it's using constant surface speed mode so the S and F are probably way off
[18:17:47] <Tom_itx> i just threw some numbers in to get it to work
[18:18:26] -!- bedah [[email protected]] has joined #linuxcnc
[18:19:05] <jthornton> it's 5/16" hex which is about 0.350 across the points
[18:19:21] -!- micges has quit [Quit: Leaving]
[18:19:24] <Tom_itx> it'll be ok, i went .375
[18:19:58] <Tom_itx> umm i thought i did
[18:20:02] <Tom_itx> just a sec
[18:21:19] <Tom_itx> it should be ok anyway. it was .365 or so. i can repost if you want
[18:21:34] <jthornton> no, that's fine
[18:22:00] <Tom_itx> how big a cut were you taking on the initial cuts?
[18:22:20] <jthornton> 0.020"
[18:22:22] <Tom_itx> i can change that easily too
[18:22:27] <Tom_itx> it's .015 in the model
[18:23:05] <Tom_itx> what feed / speed are you using on it?
[18:23:30] <jthornton> iirc 3k and 2ipm
[18:23:47] <Tom_itx> what's G92 do to that?
[18:23:53] <Tom_itx> i wasn't sure
[18:24:26] <Tom_itx> err G96 i mean
[18:24:49] -!- ktchk [[email protected]] has joined #linuxcnc
[18:24:55] <Tom_itx> you may not want that i'm not sure
[18:25:27] <jthornton> for something that small CSS doesn't make much sense to me
[18:25:37] <Tom_itx> it was in the template
[18:26:12] -!- motioncontrol [motioncontrol!~io@host63-92-dynamic.20-87-r.retail.telecomitalia.it] has joined #linuxcnc
[18:26:28] <jthornton> ah ok
[18:28:23] -!- CyberGabber [[email protected]] has joined #linuxcnc
[18:29:16] -!- toastydeath [[email protected]] has joined #linuxcnc
[18:31:17] -!- toastyde1th has quit [Ping timeout: 245 seconds]
[18:31:51] -!- ktchk [[email protected]] has parted #linuxcnc
[18:33:10] <Tom_itx> http://tom-itx.dyndns.org:81/~webpage/cnc/JT-Shop/Ball-End_tool.jpg
[18:33:16] <Tom_itx> shows the tool orientation
[18:34:54] <jthornton> that doesn't look correct the left edge should be at 87 degrees not 93
[18:35:14] <jthornton> looks pretty much like my path
[18:35:34] <Tom_itx> lemme see if i can change it, still learning about setting the tool geometry
[18:36:23] <Tom_itx> i think i know what i did
[18:37:22] <Tom_itx> yeah that's better. lemme repost the gcode
[18:37:23] -!- dgarr has quit [Ping timeout: 252 seconds]
[18:37:28] <Tom_itx> and jpg to show
[18:37:58] <jthornton> ok
[18:40:43] -!- motioncontrol has quit [Remote host closed the connection]
[18:48:02] <Tom_itx> jthornton, ok those are updated to reflect the tool jpg
[18:48:49] <jthornton> yep that looks like the tool and a tad of gouging going on too, but I would get it either way I think
[18:49:07] <Tom_itx> yeah a tiny bit
[18:51:39] <Tom_itx> well, getting edumocated on the lathe package at least
[18:57:30] <archivist> can you start the last arc earlier/on the center line to avoid a pip
[18:59:36] <jthornton> increase the radius of the blending between the ball and the post?
[19:00:43] -!- Thetawaves [[email protected]] has joined #linuxcnc
[19:14:05] -!- sendoushi [[email protected]] has joined #linuxcnc
[19:34:37] -!- CyberGabber has quit [Ping timeout: 240 seconds]
[19:36:34] -!- CyberGabber [[email protected]] has joined #linuxcnc
[19:38:37] -!- yangchang has quit [Quit: Leaving]
[19:42:36] -!- toastyde1th [[email protected]] has joined #linuxcnc
[19:42:46] -!- Loetmichel has quit [Ping timeout: 255 seconds]
[19:42:52] -!- Loetmichel [[email protected]] has joined #linuxcnc
[19:45:42] -!- toastydeath has quit [Ping timeout: 264 seconds]
[19:45:45] <Jymmm> What do you think? http://www.dafont.com/alte-haas-grotesk.font?text=Lorem+Ipsum+.+com&af=on&psize=xs
[19:47:14] -!- ve7it [[email protected]] has joined #linuxcnc
[19:57:13] -!- Guthur [[email protected]] has joined #linuxcnc
[20:02:41] <Loetmichel> re @ home
[20:03:11] -!- vladimirek has quit [Ping timeout: 252 seconds]
[20:04:12] -!- logger[mah]_ has quit [Ping timeout: 276 seconds]
[20:06:07] -!- logger[mah] [logger[mah][email protected]] has joined #linuxcnc
[20:15:38] -!- steves_logging has quit [Read error: Connection reset by peer]
[20:17:03] -!- psha has quit [Quit: Lost terminal]
[20:21:07] -!- JT-Shop has quit [Ping timeout: 240 seconds]
[20:21:42] -!- jthornton has quit [Ping timeout: 264 seconds]
[20:26:20] -!- Diony [[email protected]] has joined #linuxcnc
[20:26:27] <Diony> Hi all
[20:27:08] <Diony> I am trying to debug python code following : http://linuxcnc.org/docs/devel/html/remap/structure.html#_debugging_embedded_python_code
[20:27:42] <Diony> Someone know what is the file "util.py" and where is it?
[20:29:37] <archivist> locate util.py will find you a few
[20:30:32] <Diony> yes I just found it in /configs/sime/remap/gatting-started/python
[20:31:17] <archivist> is that the right one though
[20:31:48] <Diony> Thank you, I'll analyse it, sorry for disturbing!
[20:34:55] <ReadError> http://i.imgur.com/PuVJd.jpg
[20:35:00] <ReadError> gabe is a machinist
[20:35:04] <ReadError> note the grizzly box :)
[20:36:42] -!- draig has quit [Read error: Connection reset by peer]
[20:36:45] -!- draig_ [[email protected]] has joined #linuxcnc
[20:40:02] -!- FinboySlick has quit [Quit: Leaving.]
[20:44:51] -!- bedah has quit [Quit: bye]
[20:45:31] <anonimas1> gaaah 900 eur for a aluminium plate.
[20:49:56] <archivist> it weighs a ton?
[20:50:15] -!- CyberGabber has quit [Ping timeout: 248 seconds]
[20:51:03] <anonimas1> 124kg
[20:51:08] <anonimas1> 134..
[20:51:40] <archivist> A bit expensive then
[20:51:41] -!- CyberGabber [[email protected]] has joined #linuxcnc
[20:52:04] <anonimas1> 25mm x 2000x1000
[20:54:09] -!- CyberGabber [[email protected]] has parted #linuxcnc
[20:56:43] -!- caveira has quit [Quit: Saindo]
[20:56:53] <DJ9DJ> gn8
[20:57:45] -!- micges [[email protected]] has joined #linuxcnc
[20:58:02] -!- DJ9DJ has quit [Quit: bye]
[20:58:32] <anonimas1> http://ah.io23.net/ul/files/thing.png
[21:00:40] <anonimas1> 800grams -_- too heavy.
[21:05:17] <uw> Jymmm, did you make that font?
[21:05:53] <Jymmm> uw: no, thinking about using it
[21:06:32] <ReadError> sounds like anonimas1 needs to get up with fred and melt some coke cans
[21:07:39] <anonimas1> i think my customer wants a actual spec for the material strength.
[21:08:28] <anonimas1> :/
[21:10:33] -!- Diony has quit [Quit: Quitte]
[21:10:33] <uw> looks good. fontsquirrel.com is another place ilook for fonts
[21:10:42] <anonimas1> helicoiled threads and all..
[21:14:55] <uw> i use them when making engraving projects all the time
[21:16:35] -!- servos4ever has quit [Quit: ChatZilla 0.9.85 [SeaMonkey 2.0.11/20101206162726]]
[21:16:46] <anonimas1> 15 eur per part in material cost..
[21:17:06] <anonimas1> + 40 eur of machinetime..
[21:17:15] -!- andypugh [andypugh!~andy2@cpc2-basl1-0-0-cust639.basl.cable.virginmedia.com] has joined #linuxcnc
[21:18:36] <anonimas1> +bead blasting and clear anodize..
[21:20:02] <syyl> 40eur machinetime for a one off?
[21:20:42] <andypugh> Sounds rather cheap
[21:21:01] <anonimas1> it's for a assembly im making to build a product out of
[21:21:11] <andypugh> My machine wouldn't get out of bed for €40 an hour :-)
[21:21:32] <anonimas1> i need 2 per assembly
[21:22:10] <anonimas1> i'd cast them if i had a volume, but i dont :)
[21:22:19] <anonimas1> because they are structural.
[21:22:29] <andypugh> I came in late, is this what you have been quoted, or what you are offering? I was assuming the former.
[21:22:54] <anonimas1> haha, just making a rough estimate how much time it'll take me to machine the parts for the assembly
[21:23:40] <andypugh> I always find eMachineshop.com is a good way to convince myself that it is cheaper to make it myself.
[21:24:21] <anonimas1> im trying to figure out what price to sell the complete assembly for so im calculating time per part in my haed
[21:24:24] <anonimas1> head
[21:34:20] -!- jthornton [[email protected]] has joined #linuxcnc
[21:34:52] -!- JT-Shop [[email protected]] has joined #linuxcnc
[21:35:25] <Tom_itx> JT-Shop you want me to change the profile?
[21:35:40] <Tom_itx> or you can send a flat file with it if you want
[21:36:12] <JT-Shop> Tom_itx: sorry lost my internet
[21:36:19] <Tom_itx> bak in a bit... early dinner meeting
[21:36:23] <JT-Shop> ok
[21:36:29] <JT-Shop> I have to run too
[21:36:32] <Tom_itx> np
[21:36:38] <Tom_itx> bak in a couple hrs prolly
[21:36:51] <Tom_itx> wasn't sure if you wanted me to change it or not
[21:37:24] <JT-Shop> I've been gone driving Ms. Dasiy
[21:38:01] <JT-Shop> now I have to go pick her up
[21:38:32] -!- Guthur has quit [Remote host closed the connection]
[21:39:56] -!- Brandonian has quit [Quit: Brandonian]
[21:42:28] <Jymmm> uw: Thanks, I like dafonts ability to link to tests in various sizes too
[21:44:13] -!- chillly has quit [Quit: Leaving]
[21:47:10] -!- JT-Shop has quit [Read error: Connection reset by peer]
[21:47:12] -!- jthornton has quit [Read error: Connection reset by peer]
[21:48:36] -!- JT-Shop [[email protected]] has joined #linuxcnc
[21:48:49] -!- jthornton [[email protected]] has joined #linuxcnc
[21:51:56] <jdh> a2z has 12% off all taigs.
[21:54:20] -!- skunkworks has quit [Read error: Connection reset by peer]
[21:56:34] -!- maximilian_h [[email protected]] has joined #linuxcnc
[21:56:36] -!- maximilian_h has quit [Client Quit]
[21:57:07] -!- syyl has quit [Quit: Leaving]
[22:07:19] -!- geografa has quit [Quit: geografa]
[22:09:01] -!- geografa has quit [Client Quit]
[22:27:47] -!- zzolo has quit [Quit: zzolo]
[22:34:05] -!- sumpfralle [[email protected]] has joined #linuxcnc
[22:46:02] -!- sendoushi has quit [Read error: Connection reset by peer]
[22:46:37] -!- sendoushi [[email protected]] has joined #linuxcnc
[22:48:32] <Tom_itx> JT-Shop
[22:48:39] <Tom_itx> bak
[22:50:33] <JT-Shop> me too
[22:51:37] <Tom_itx> was i to mod this file?
[22:51:53] <JT-Shop> no, it's ok
[22:52:28] <Tom_itx> ok i just noticed talk about it above
[22:52:52] <Tom_itx> do you have a lathe file i can sort out my template with?
[22:53:01] <Tom_itx> doesn't matter what it is really
[22:53:22] -!- Tom_L [Tom_L!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[22:53:23] <JT-Shop> lathe file?
[22:53:27] <Tom_itx> gcode
[22:53:51] <Tom_itx> i grabbed the first template that looked workable for this
[22:54:20] <JT-Shop> post processor template?
[22:54:25] <Tom_itx> yes
[22:54:37] <Tom_itx> i fixed one for my mill
[22:54:38] <JT-Shop> gotcha
[22:54:42] <Tom_itx> but it was a minimal edit
[22:55:00] <Tom_itx> i have nothing to test it on anyway
[22:55:19] <JT-Shop> mill should work if you change to G18 plane
[22:55:20] -!- skunkworks__ [skunkworks__!~chatzilla@str-bb-cable-south-3-102.dsl.airstreamcomm.net] has joined #linuxcnc
[22:55:39] <Tom_itx> the code comes out as x y coords
[22:55:43] <Tom_itx> instead of x z
[22:56:01] <JT-Shop> that wont work
[22:56:07] -!- beawesomeinstead has quit [Max SendQ exceeded]
[22:56:09] <Tom_itx> :)
[22:56:14] -!- beawesomeinstead has quit [Changing host]
[22:56:14] -!- beawesomeinstead has quit [Changing host]
[22:56:51] <Tom_itx> i tried it the first round then had to reload the sample post files for the lathe
[22:58:34] <JT-Shop> damn good chicken
[22:58:59] <JT-Shop> you can turn off line numbers they have no value what so ever in emc
[22:59:17] <JT-Shop> brb wash up from the feast
[22:59:19] <Tom_itx> i know
[23:03:14] -!- Guthur [[email protected]] has joined #linuxcnc
[23:05:29] <JT-Shop> much better FD&H and clean
[23:05:45] <gene77> Hi Guys; problem with face.py, will not write output file or transfer to linuxcnc. Fix available?
[23:05:52] <Tom_itx> were you gonna run that code or just compare it?
[23:05:59] <Tom_itx> just curious how it did
[23:06:09] <JT-Shop> do you have Axis loaded when you run face.py?
[23:06:16] <gene77> yes
[23:06:16] <JT-Shop> Tom_itx: working on it now
[23:06:39] <JT-Shop> does it give you the option to "Save to Axis" or something like that?
[23:07:44] <gene77> I set the default dir to/home/gene/linuxcnc/nc_files, did help. It can see other files when it open the filename dialog though (no, just write to file)
[23:08:35] <JT-Shop> did you run face.py "from Axis"? via file open in Axis I think
[23:08:53] <gene77> I set the default dir to/home/gene/linuxcnc/nc_files, did not help. It can see other files when it open the filename dialog though (no, just write to file) yes, ran it from axis
[23:09:43] <JT-Shop> did you set the filter option in the ini file?
[23:10:06] <andypugh> halrun
[23:10:13] <gene77> I think so, but lemme check, that was yonks ago.
[23:10:15] <andypugh> Wrong window..
[23:11:22] <JT-Shop> Tom_itx: your using the K offset in the G18 plane only I and J is valid in G18
[23:12:29] <gene77> [FILTER]
[23:12:30] <gene77> PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
[23:12:32] <gene77> PROGRAM_EXTENSION = .py Python Script
[23:12:33] <gene77> PROGRAM_EXTENSION = .wiz GWiz Wizard File
[23:12:35] <gene77> wiz = wiz2gcode
[23:12:36] <gene77> png = image-to-gcode
[23:12:38] <gene77> gif = image-to-gcode
[23:12:39] <gene77> jpg = image-to-gcode
[23:12:41] <gene77> py = python
[23:14:09] <gene77> I saw an error message once, something about can't write to tmp or .tmp. I have neither iin my home dir
[23:14:27] <JT-Shop> .tmp is a hidden directory
[23:14:30] <Jymmm> /var/tmp
[23:14:48] <gene77> right, ls -la doesn't show in in my home dir
[23:15:50] <JT-Shop> I just ran face.py from axis and it works
[23:15:59] <gene77> That tmp in /var is owned by root, useless to me
[23:16:10] <Jymmm> gene77: type: env<enter>
[23:16:20] <Tom_itx> JT-Shop does the J correlate to the z move?
[23:16:33] <Tom_itx> x to I and z to J?
[23:16:35] <JT-Shop> when you open it from Axis if you don't see "Write to Axis" it doesn't know Axis is alive
[23:16:53] <JT-Shop> I = X J = Z
[23:16:59] <JT-Shop> yep
[23:17:01] <Tom_itx> ok i think that's fixed
[23:17:41] -!- micges has quit [Quit: Leaving]
[23:18:35] <Tom_itx> JT-Shop i don't get what the T0000 is for on rapids.. is that how they're shutting down the spindle?
[23:18:48] <gene77> env has no TMP assigment
[23:19:45] <JT-Shop> gene77: does the bottom right button say "Quit"?
[23:19:53] <gene77> yes
[23:19:54] <Tom_itx> JT-Shop wouldn't M5 work the same on a lathe?
[23:20:01] <gene77> yes
[23:20:05] <JT-Shop> then it does not know Axis is alive
[23:20:16] <Tom_itx> i wonder why they didn't just do that
[23:20:23] <gene77> but axis ran it!
[23:20:48] <andypugh> Tom_itx: T000000 turns off tool offsets and unlads the tools on some lathes, I think
[23:20:54] <Tom_itx> oh
[23:21:03] <andypugh> halrun
[23:21:03] <JT-Shop> it looks for something specific just a sec
[23:21:06] <Tom_itx> yeah i spoke too soon i was referring to S0000
[23:21:08] <andypugh> Did it agai
[23:21:10] <Tom_itx> sry
[23:21:10] <andypugh> n
[23:21:12] <gene77> and it looks like /var/tmp is wide open for perms, and I do own a couple of files in it.
[23:21:38] <joe9> i home the machine everytime I start it up. Is that common? or, is there anyway that I can save the x,y,z values between restarts?
[23:21:42] <Connor> okay, so, I want to start working on the hal config and stuff for a ATC..
[23:21:58] <JT-Shop> that doesn't have anything to do with it "seeing" axis
[23:22:06] <Connor> can anyone give me USEFUL info on that
[23:22:20] <Connor> for toolchanges.. I.E. a sample hal file or something..
[23:23:02] <JT-Shop> gene77: it looks for IN_AXIS = os.environ.has_key("AXIS_PROGRESS_BAR")
[23:23:56] <gene77> John, would this be related to isolcpus? How the heck do I add that to my ini?
[23:23:59] <JT-Shop> joe9: homing after a power cycle is normal also after using the e-stop on a stepper machine
[23:24:53] <joe9> JT-Shop: thanks.
[23:25:02] <Connor> anyone? :)
[23:25:42] <JT-Shop> gene77: I don't think it is related to either one
[23:25:50] <andypugh> Connor: It's complicated
[23:25:56] <andypugh> What sort of ATC?
[23:26:13] <gene77> ISTR I saw something along those lines in the wiki, might be a starter guide anyway
[23:26:23] <Connor> andypugh: I know. To start off, a simple rack at the end of the table.
[23:27:14] <gene77> and the env, from another term session, has no such string in its env John
[23:27:31] <JT-Shop> gene77: if you go File > Open in Axis then navigate to face.py and open it does a spinner replace the mouse pointer when over Axis?
[23:27:38] <Connor> which means, I'll have different positions for each tool.. later on.. it'll be a carousel or some other form that will only require 1 position.
[23:27:44] <gene77> lemme check
[23:27:55] <JT-Shop> gene77: are you running axis from a terminal?
[23:28:07] <gene77> yes John
[23:28:15] <gene77> yes again
[23:28:37] <JT-Shop> I wonder if that has anything to do with it?
[23:28:46] <andypugh> well, http://www.linuxcnc.org/docs/devel/html/remap/structure.html is the docs, and in master there is an example config in sim/remap/rack-tolchange
[23:28:49] <JT-Shop> can you run it from the CNC menu?
[23:29:58] <JT-Shop> no, I just ran axis sim from a terminal and worked fine.
[23:30:02] <Connor> What version of linuxcnc is that ?
[23:30:10] <andypugh> Connor: Master
[23:30:17] <Connor> my sim doesn't have sim/remap
[23:30:34] <JT-Shop> gene77: split in half and run the Axis sim and then face.py to see if something is borked on your config
[23:30:48] <andypugh> Connor: Which version are ou on?
[23:31:30] <Connor> 2.5.0 SIM and 2.5.2 or something on my mill.
[23:31:32] <JT-Shop> dang that was 4 years ago that I wrote that LOL
[23:31:36] <gene77> I can run it from the menu, and I can run it from the launcher icon, no change in the quit buttom lower right corner
[23:31:51] <JT-Shop> try running the Axis sim
[23:31:54] <Connor> was going to get the basic config working in the sim then port it over to the machine
[23:31:59] <JT-Shop> someone is in a time warp
[23:32:04] <andypugh> Connor: You need a 2.6 version. Toolchange is so much simpler with remap
[23:32:39] <Connor> okay. What's the easiest way to upgrade both my SIM and my main machine? and will I break anything? :)
[23:32:50] <andypugh> It is basically too much of a game to move the machine axes during toolchange prior to that.
[23:33:02] <andypugh> Connor: Buildbot
[23:33:11] <andypugh> buildbot.linuxcnc.org
[23:33:43] <Tom_itx> JT-Shop do you use G96 (Constant Surface Speed) on your lathe?
[23:33:57] <andypugh> And try not to break it, but don't guarantee not to.
[23:34:00] <gene77> sim version is not in the,nu
[23:34:09] <gene77> sim version is not in the CNC menu
[23:34:31] <Tom_itx> the S word is a constant surface speed in feet per minute instead of spindle speed i believe
[23:34:43] <Connor> okay, so I take it master is the 2.6 dev branch
[23:34:50] <andypugh> Aye
[23:35:06] <andypugh> Try the sim on the sim machine first
[23:35:15] <Connor> okay.. so, I'm on 10.04
[23:35:19] <Tom_itx> damn i'm gonna have to get the book out
[23:35:29] <andypugh> ?
[23:35:39] <Connor> looking to figure out which build to grab..
[23:35:51] <JT-Shop> Tom_itx: most of the time except for drilling, tapping, and tiny things
[23:35:58] <Tom_itx> andypugh i'm trying to mod a lathe template
[23:36:16] <JT-Shop> seems face.py is a bit ill behaved if you want to save to a file if you launched it from axis
[23:36:35] <Tom_itx> JT-Shop, their format is wrong anyway for it acording to the linuxcnc docs
[23:37:19] <Tom_itx> i need to add a parameter and change the S speed to D speed and add the rate as the S word
[23:37:21] <gene77> You are shooting for the understatement of this half hour? :)
[23:37:23] <andypugh> Connor: deb http://buildbot.linuxcnc.org/ lucid master-sim
[23:37:23] <JT-Shop> that something you change in the template?
[23:37:31] <Tom_itx> i can
[23:37:50] <Tom_itx> it's very flexible
[23:37:55] <Tom_itx> it's all in the knowing how
[23:37:57] <JT-Shop> gene77: I mean face.py doesn't give you a graceful way to exit if you save to a file
[23:37:59] <Tom_itx> and i'm rusty
[23:39:09] <andypugh> Tom_itx: Bathing in Diet Coke will help
[23:40:30] <JT-Shop> or caustic soda
[23:40:31] <gene77> I'll be, I found the file, it put it in the $conf dir!
[23:40:42] <Tom_itx> i have quite a few i could choose from. dynapath, cn102x (whatever that is), mazak, okuma and about a dozen others
[23:40:57] <gene77> wtf?
[23:41:53] <gene77> A couple hdogs just arrived, time out for 10 min
[23:42:00] <Tom_itx> fanuc 6t
[23:42:02] <JT-Shop> what file
[23:42:18] <JT-Shop> I thought you said a couple of hogs
[23:43:11] <gene77> the output file
[23:43:33] <gene77> i told it told it to write
[23:43:39] <JT-Shop> did you set the NC file directory?
[23:44:05] <JT-Shop> still puzzles me why face.py can't see that Axis is alive
[23:44:08] <gene77> yes, right where it is...
[23:44:58] <Connor> okay. got the 2.6 build on my sim machine.
[23:45:09] <Connor> now how do I get the remap stuff ?
[23:45:12] <JT-Shop> when go to CNC Linuxcnc the sims don't show up?
[23:48:31] <andypugh> Connor: It's just there, the sim/remap/rack toolchange should work
[23:48:57] <Connor> found it.. it's having issues runnning.. can't find ../../core_sim.hal
[23:48:58] <andypugh> Oh, ah, well, <puzzled>
[23:49:30] <andypugh> Ah, yes, you know I couldn't find that file earlier.
[23:49:40] <andypugh> let me experiment
[23:49:48] <Connor> it's in the Axis directory though..
[23:50:01] <Connor> needs to be looking in ../../axis maybe ?
[23:51:38] <gene77> nother one, I ran python path-to-face.py, set the nc_directory, but when I went back to look, still in the same invocation, it had defaulted to /home again. So it is not saveing that pref
[23:54:31] <JT-Shop> gene77: you running 2.5?
[23:54:35] <gene77> yes
[23:55:04] <JT-Shop> and you don't see any sample configs when you run CNC > LinuxCNC to pick from?
[23:55:06] <gene77> latest build I think, but the buildbot hasn't offered a new one in a week or so.
[23:55:29] <Connor> okay.. what the heck is toplevel.py ?
[23:55:40] <gene77> No samples, just the ones I've made over the years
[23:56:37] <andypugh> Connor: It is actually in configs/common/core_sim.hal
[23:56:49] <gene77> My back is telling me to stick a fork in it, its done, see you all on the ML later.
[23:57:09] <JT-Shop> ok
[23:57:21] <Connor> I don't have a configs/common
[23:57:51] <andypugh> Not at all?
[23:57:56] * JT-Shop listens to Autobahn by Kraftwerk
[23:57:59] <andypugh> Or not in the config tree?
[23:58:17] <Connor> not in my ~/linuxcnc/configs/
[23:59:03] <andypugh> No, it is probably hiding in /usr/linuxcnc/docs or somewhere equally stupid
[23:59:39] <andypugh> You might need to find it and copy it to somewhere useful. Welcome to the Bleeding Edge "-(