Back
[00:01:31] <andypugh> Interesting fact (possibly only to me). Formica is a contraction of "Formable Mica" and has no connection to the latin name for ants, or to formic acid, at all. It was originally created as an alectrical insulation, and only later became a worktop (etc) material.
[00:02:00] <tjtr33> find it under big old transistors ( or rocks )
[00:02:49] <andypugh> Formic acid and Ants (formica) and the hillariously-missheard word "formication" are all related though.
[00:03:33] <L84Supper> spoken like a true formicator
[00:03:47] <tjtr33> under control of the king
[00:05:37] <L84Supper> you could mix carbon black with a resin to make your own thermal gad pads
[00:06:09] <andypugh> something non-conducting might be wiser
[00:07:11] <L84Supper> it is, you just need the proper carbon black
[00:07:30] <andypugh> Nan-diamond?
[00:07:37] <andypugh> (Nano)
[00:08:10] <L84Supper> carbon blacks are cheap, few $/lb
[00:08:26] <andypugh> Actually, dimond dust would be ideal, as it has a very high thermal conductivity. Especially isotopically pure C14 diamond.
[00:08:30] -!- tmcw has quit [Remote host closed the connection]
[00:08:54] <L84Supper> just higher priced
[00:09:06] <r00t4rd3d> british port
http://i.imgur.com/hZVSbcm.gif
[00:09:18] <r00t4rd3d> err porn
[00:10:44] <andypugh> I prefer Port
[00:10:54] <tjtr33> pour-n
[00:11:58] <L84Supper> we use carbon blacks in polymers to make them more thermally conductive than aluminum without being electrically conductive
[00:14:36] <andypugh> I tried it for this:
http://link.springer.com/article/10.1007%2FBF00275452?LI=true but decided that TiO2 was better (and nicer)
[00:16:26] -!- gasbakid has quit [Remote host closed the connection]
[00:16:34] -!- R2E4_ [[email protected]] has joined #linuxcnc
[00:21:04] -!- R2E4_ has quit [Client Quit]
[00:30:19] -!- micges has quit [Quit: Leaving]
[00:35:43] -!- micges [[email protected]] has joined #linuxcnc
[00:37:21] -!- mourner has quit [Quit: mourner]
[00:38:34] <Tom_itx> andypugh, how'd it all turn out?
[00:38:41] <andypugh> Grand
[00:39:03] <andypugh> Did you see the picasaweb link?
[00:39:23] <andypugh> https://plus.google.com/photos/108164504656404380542/albums/5849768999973574065?banner=pwa
[00:39:23] <andypugh> [10:33pm]
[00:39:29] <Tom_itx> the one you keep adding to yes
[00:39:42] <andypugh> Last two pics are the new lid
[00:40:04] <Tom_itx> did the halves fit ok?
[00:40:35] <andypugh> I manually tweaked the inner shape. I think I under-pushed the outer.
[00:41:07] <Tom_itx> looks good from here
[00:41:49] -!- asdfasd has quit [Ping timeout: 240 seconds]
[00:42:23] <andypugh> Aye. The next one would be better, but I hope not to do a next one.
[00:43:05] <andypugh> It's lot stronger than the previous one.
[00:43:25] <PCW> Looks good but too shiny!
[00:43:37] <Tom_itx> yeah you need to tarnish it now
[00:43:50] <andypugh> Given that on a 200-person dinner it is placed and removed 400 times, by drunkards, it has a hard life.
[00:44:32] <Tom_itx> i may try a tap cycle with that template some time if i could get you to shove it into some wood or something
[00:44:43] <Tom_itx> just to see if it works ok
[00:45:16] <Tom_itx> i'm in no hurry to try it though
[00:45:27] <andypugh> Yeah. should be OK. I have some unbreakable taps (7/8 BSP)
[00:46:26] <Tom_itx> it has a groove cycle but i haven't set it up yet
[00:49:53] <andypugh> The pot ritual is that the chap to your right attracts your attention, and bows. he passes the pot, you bow, he takes the lid. You drink. you bow, he replaces the lid. you bow to your left, he takes the pot, you take the lid...
[00:50:53] <andypugh> This would be classed as "binge drinking" except we wear dinner-jackets :-)
[00:51:00] <Tom_itx> confusing
[00:51:52] -!- linuxcnc-build has quit [Remote host closed the connection]
[00:51:54] -!- FinboySlick [[email protected]] has joined #linuxcnc
[00:53:05] <Tom_itx> must be getting used tomorrow then
[00:53:15] <andypugh> I think it is meant to be. if you get it wrong, you have to drink more :-)
[00:53:23] <Tom_itx> haha
[00:53:45] <andypugh> Yes, tomorrow evening. I wasn't actually going to attend, but I might have to now.
[00:54:56] <andypugh> Right, time to sleep in the hope of waking up without this annoying cough.,,
[00:55:25] -!- andypugh has quit [Quit: andypugh]
[00:59:22] -!- mattions has quit [Ping timeout: 272 seconds]
[01:03:31] -!- Thetawaves_ has quit [Ping timeout: 248 seconds]
[01:14:35] -!- micges has quit [Quit: Leaving]
[01:16:22] -!- uw [uw!~uw@unaffiliated/uw] has joined #linuxcnc
[01:16:35] <uw> there we are
[01:20:04] -!- ravenlock [ravenlock!~ravenlock@enlightenment/developer/ravenlock] has joined #linuxcnc
[01:24:04] -!- tmcw has quit [Ping timeout: 272 seconds]
[01:26:39] -!- sumpfralle [[email protected]] has joined #linuxcnc
[01:34:17] -!- hashfail [hashfail!~noone@64-121-232-59.c3-0.eas-ubr3.atw-eas.pa.cable.rcn.com] has joined #linuxcnc
[01:38:38] -!- L84Supper has quit [Ping timeout: 272 seconds]
[01:39:10] -!- adb has quit [Ping timeout: 260 seconds]
[01:40:30] -!- PCW has quit [Quit: ChatZilla 0.9.90 [Firefox 19.0/20130215130331]]
[01:46:42] -!- rob_h has quit [Ping timeout: 244 seconds]
[01:58:11] -!- L84Supper [L84Supper!~Larch@unaffiliated/l84supper] has joined #linuxcnc
[02:01:18] <ReadError> http://www.youtube.com/watch?v=UQ3Lisz1PMc
[02:01:23] <ReadError> little video i just made of my new machine
[02:03:37] -!- mhaberler has quit [Quit: mhaberler]
[02:04:59] <jdh> who is chris h?
[02:05:18] <ReadError> oh some troll
[02:05:57] <jdh> what's the material?
[02:06:00] <ReadError> g10
[02:06:13] <ReadError> i have some waste since i didnt rotate my gcode but im good now
[02:07:08] -!- cmorley has quit [Ping timeout: 255 seconds]
[02:14:35] -!- Wildhoney has quit [Ping timeout: 245 seconds]
[02:19:10] -!- L84Supper has quit [Ping timeout: 272 seconds]
[02:21:27] -!- sumpfralle has quit [Ping timeout: 256 seconds]
[02:22:17] -!- cmorley [[email protected]] has joined #linuxcnc
[02:41:27] -!- L84Supper [L84Supper!~Larch@unaffiliated/l84supper] has joined #linuxcnc
[03:04:33] -!- tmcw has quit [Remote host closed the connection]
[03:41:05] -!- FinboySlick has quit [Quit: Leaving.]
[04:00:53] -!- BHSPiMonkey has quit [Read error: Operation timed out]
[04:02:14] -!- BHSPiMonkey [[email protected]] has joined #linuxcnc
[04:37:48] <Tecan> a bop bop a lubop a lop bam boo ?
[04:38:01] -!- tronwizard [[email protected]] has joined #linuxcnc
[04:45:21] -!- Keknom [[email protected]] has joined #linuxcnc
[04:55:55] -!- s1dev has quit [Ping timeout: 246 seconds]
[05:01:15] -!- s1dev [[email protected]] has joined #linuxcnc
[05:19:42] -!- Gene34 has quit []
[05:21:18] -!- jfire has quit [Quit: Leaving.]
[05:23:19] -!- AR_ has quit [Ping timeout: 240 seconds]
[05:28:51] -!- R2E4_ [[email protected]] has joined #linuxcnc
[05:29:20] <R2E4_> Did the install ask me for root password?
[05:29:34] <R2E4_> I don remember and I need root access....:-)
[05:31:04] <R2E4_> I cant gain access via su -
[05:34:47] -!- dhoovie [[email protected]] has joined #linuxcnc
[05:37:04] <ds3> found a ready to go D525 box for $200...hopefully, it will really be as good of a drop in as people hinted
[05:37:42] <Connor> should be.
[05:37:47] <Connor> what make is the D525 box ?
[05:38:15] <R2E4_> got it.
[05:41:56] -!- mk0 [[email protected]] has joined #linuxcnc
[05:47:38] -!- skorasaurus has quit [Ping timeout: 245 seconds]
[05:50:15] -!- Thetawaves_ [[email protected]] has joined #linuxcnc
[05:52:38] -!- hdokes has quit [Ping timeout: 245 seconds]
[06:01:39] <r00t4rd3d> http://defensedistributed.com/
[06:02:19] <r00t4rd3d> 3d printed gun that shoots 600 rounds per minute
[06:02:49] -!- Fox_Muldr has quit [Ping timeout: 240 seconds]
[06:04:40] -!- Fox_Muldr [[email protected]] has joined #linuxcnc
[06:05:44] <R2E4_> I justinstalled my 5i25 card and computer video doesn't come up. Remove it and computer boots fine.
[06:05:55] -!- cmorley has quit [Ping timeout: 256 seconds]
[06:05:57] <R2E4_> two red lights flash on 5i25
[06:09:17] <r00t4rd3d> red = fault
[06:13:04] <R2E4_> yeah.. I'm sure its not good news.
[06:13:20] <R2E4_> It stops the computer also a few seconds after
[06:13:29] <r00t4rd3d> how are they powered?
[06:14:14] <r00t4rd3d> you need to talk to andy or pcw_home
[06:17:33] <R2E4_> how is what powered?
[06:21:43] <r00t4rd3d> nvm
[06:24:36] <R2E4_> I just plugged the 5i25 in pci slot and computer video doesnt come on.
[06:28:58] -!- cmorley [[email protected]] has joined #linuxcnc
[06:29:31] <r00t4rd3d> old computer?
[06:31:46] <R2E4_> not too old. I just put it in an ibm and the computer booted. suspect it is the computer.
[06:32:30] <R2E4_> problem is it ios an IBM and the SMI issue causing big latency shows upo.
[06:36:34] -!- tjtr33 [[email protected]] has parted #linuxcnc
[06:39:01] -!- psha [[email protected]] has joined #linuxcnc
[06:40:52] <r00t4rd3d> time for a new motherboard
[06:53:51] -!- R2E4_ has quit [Quit: Relax, its only ONES and ZEROS!]
[07:04:20] -!- kwallace1 [[email protected]] has joined #linuxcnc
[07:06:23] -!- kwallace has quit [Ping timeout: 255 seconds]
[07:18:34] -!- ve7it has quit [Remote host closed the connection]
[07:37:58] -!- Thetawaves_ has quit [Ping timeout: 246 seconds]
[07:45:16] -!- DJ9DJ [DJ9DJ!~Deejay@unaffiliated/dj9dj] has joined #linuxcnc
[07:45:26] -!- kwallace1 [[email protected]] has parted #linuxcnc
[07:45:34] <DJ9DJ> moin
[08:05:56] -!- jdh has quit [Ping timeout: 252 seconds]
[08:06:03] -!- jdh [[email protected]] has joined #linuxcnc
[08:11:24] -!- mhaberler [[email protected]] has joined #linuxcnc
[08:11:29] -!- bedah [[email protected]] has joined #linuxcnc
[08:12:25] -!- pikeaero has quit [Quit: No Ping reply in 180 seconds.]
[08:12:32] -!- pikeaero [[email protected]] has joined #linuxcnc
[08:12:50] -!- Thetawaves_ [[email protected]] has joined #linuxcnc
[08:14:30] -!- Thetawaves_ has quit [Client Quit]
[08:19:05] -!- mk0 has quit [Quit: Leaving]
[08:19:33] -!- cmorley has quit [Quit: Leaving.]
[08:42:13] -!- cmorley [[email protected]] has joined #linuxcnc
[09:04:36] -!- asdfasd [[email protected]] has joined #linuxcnc
[09:17:23] <mrsun> hmm now i need to make a tool holder for the radius tuner ... hmm
[09:18:17] <mrsun> hmm roundstock maybe
[09:35:05] -!- racycle has quit [Quit: racycle]
[09:35:26] -!- Keknom has quit [Quit: Leaving.]
[09:40:39] <Tecan> http://www.youtube.com/watch?v=MMbI1O-xc40
[09:53:38] <bedah> i got an elder stepperdriverboard, with nearly no documentation, where could i find more information about "whiteAnt Electronics", only thing i found was this:
http://buildyourcnc.com/whiteant3dprinterandcncmachine.aspx
[09:59:34] <archivist> bedah, sometimes just getting the chip data sheet is all you need
[10:03:17] <bedah> oh already got that, but maybe i could find some more information
[10:06:05] <bedah> most probably i will have to rebuilt the whole code for the arduino mega, or i will have to adapt some other firmware
[10:06:10] <bedah> dunno, i will see
[10:08:52] -!- psha has quit [Quit: Lost terminal]
[10:14:45] -!- cevad [[email protected]] has joined #linuxcnc
[10:15:42] -!- cncbasher [cncbasher!~quassel@cpc15-hart9-2-0-cust101.11-3.cable.virginmedia.com] has joined #linuxcnc
[10:17:01] -!- The_Ball has quit [Ping timeout: 256 seconds]
[10:17:46] -!- The_Ball [[email protected]] has joined #linuxcnc
[10:18:32] -!- davec_ has quit [Ping timeout: 255 seconds]
[10:46:36] -!- rob_h [[email protected]] has joined #linuxcnc
[10:59:46] <Loetmichel> mornin'
[11:05:47] -!- Wildhoney has quit [Ping timeout: 255 seconds]
[11:09:50] jthornton_ is now known as jthornton
[11:45:59] -!- dhoovie has quit [Read error: Connection reset by peer]
[11:47:03] -!- syyl_ [[email protected]] has joined #linuxcnc
[11:50:26] -!- syyl has quit [Ping timeout: 272 seconds]
[11:59:31] -!- hdokes [hdokes!~IceChat77@173-165-40-177-Illinois.hfc.comcastbusiness.net] has joined #linuxcnc
[12:02:50] -!- cmorley1 [[email protected]] has joined #linuxcnc
[12:05:11] -!- cmorley has quit [Ping timeout: 252 seconds]
[12:08:58] -!- andypugh [andypugh!~andy2@cpc16-basl9-2-0-cust685.20-1.cable.virginmedia.com] has joined #linuxcnc
[12:35:07] -!- ler_hydra [[email protected]] has joined #linuxcnc
[12:49:14] -!- grummund [grummund!~user@unaffiliated/grummund] has parted #linuxcnc
[13:21:08] JT-Shop-2 is now known as JT-Shop
[13:39:14] -!- hdokes has quit [Read error: Connection reset by peer]
[13:39:46] -!- hdokes [hdokes!~IceChat77@173-165-40-177-Illinois.hfc.comcastbusiness.net] has joined #linuxcnc
[13:52:06] <andypugh> Some encoder-like things that I saw on eBay turned up today. I have no idea what they really are but they were made by Librascope in 1963. They are called "shaft to digital encoder" and have lots of pins on the bottom. C, 0, /1, 2, /2, 3, /3, ...... 13, /13. I think that they might have been used as the interface between a mechanical integrator and a digital stage.
[13:53:02] <skunkworks> pictures?
[13:53:17] <andypugh> The manufacturer was Librascope, a division of General Precision. and that might be ringing bells with some of you, that was the mnufacturer of the LGP-30 immortalised in the story of "Mel the Programmer"
[13:54:33] <andypugh> skunkworks:
http://www.ebay.co.uk/itm/330859627467
[13:54:51] <andypugh> Same vintage as your machine, I guess?
[13:55:55] <andypugh> 28 pins on the bottom.
[13:57:29] <skunkworks> wow - no. the K&T had resolvers
[13:57:59] <skunkworks> the 70's vintage lathe had some sort of optical encoder for spindle sync
[13:59:37] <archivist> gray code optical?
[14:00:54] <andypugh> I have no idea.
[14:02:48] <andypugh> I get the feeling that they are so old that the internet has never heard of them.
[14:03:47] <archivist> spose you want me to lift Handbook of transducers for electronic measuring systems circa 1969 ...in box016....not seen that for a while
[14:03:55] <andypugh> Apprently the programmin manual for the LGP-30 was typewritten. As in, typed in full as required.
[14:04:30] <archivist> some of the manuals I have are typed
[14:04:46] <archivist> with real photographs
[14:06:52] <andypugh> My Thesis has real photographs. Even in 1993 digital imaging hadn't really caught on.
[14:08:11] <L84Supper> what features would be most helpful for a vision interface to EMC? edge detection, orientation, optical measurement etc etc?
[14:10:02] <archivist> all of the above
[14:10:16] <andypugh> Fiducial mark alignemt
[14:10:31] <andypugh> I think that some people have made some progress with it.
[14:10:50] <andypugh> Bit nothing has made it into the mainstream.
[14:11:14] <archivist> http://www.archivist.info/cnc/cnccam.html
[14:11:39] <L84Supper> we have to work on something similar to this anyway for a project, so I'd like to see it made useful for general use
[14:11:41] <archivist> that needs to be centred properly
[14:12:02] <skunkworks> that would be cool.
[14:12:49] -!- ler_hydra has quit [Remote host closed the connection]
[14:13:31] <L84Supper> we saw this
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Axis_Embed_Video and
http://psha.org.ru/b/camview-emc.html
[14:16:24] -!- mourner has quit [Quit: mourner]
[14:17:07] <L84Supper> we need to have the vision system orient the part, and search for certain features and then coordinate a tool to perform work in that feature
[14:18:03] <archivist> andypugh, ok that book does not mention that maker
[14:19:25] <archivist> andypugh, some in this book are contact type so try a dvm on resistance across a pair
[14:20:31] <archivist> at that age the contact type is more likely especially with that many connections
[14:22:31] -!- MarkusBec has quit [Ping timeout: 245 seconds]
[14:24:32] -!- MarkusBec [[email protected]] has joined #linuxcnc
[14:26:29] <andypugh> It sounds like mechanical contacs. I suspect it is intended for hand operation.
[14:26:46] <archivist> andypugh, or dvm to the C (common) and one of the many other contacts
[14:27:33] <andypugh> C to 0 beeps cyclically. I have not found any other contacts.
[14:27:37] <archivist> they mention a common in this book and the one of the companies id Litton, same first two characters
[14:27:52] <andypugh> Though I guess it could be multi-turn
[14:28:44] <andypugh> I think they will be going into the back of a cupboard as a warning not to drink and eBay..
[14:28:51] <archivist> hehe
[14:29:47] <archivist> I dont think I can blame drink for my odd stuff
[14:31:59] <andypugh> I can't help wondeirng if somewhere out there there is somebody needing these parts to finish his targetting computer restoration, or similar.
[14:32:32] <archivist> or aircraft restoration
[14:32:50] <andypugh> Indeed. Though I am not sure what they would do in an aircraft.
[14:33:44] <archivist> I have some odd stuff on a website and a few times a year I get rid of something when the buyers search for a rare part number
[14:34:30] <andypugh> That might be a reasonable idea. "Old stuff I have going spare"
[14:34:39] -!- phantoxeD has quit []
[14:35:07] <archivist> best was a filter to a man in Inverness for his milling machine
[14:35:49] <archivist> I delivered it, because at the same time I got a cnc lathe...from him off ebay
[14:36:25] <andypugh> A curious coincidence
[14:36:49] <archivist> exceeeeeedingly
[14:37:39] <archivist> he realised my email address on the part number site was similar to my ebay handle
[14:41:56] <skunkworks> how about this. I was trying to call my girlfriend. A guy answers and said 'Hi sam' after a bit of WTF - I had dialed a distant cousin. (I didn't know his number)
[14:42:40] <Jymmm> you're dating your cousin?!
[14:42:49] <skunkworks> heh
[14:49:08] -!- zzolo has quit [Quit: zzolo]
[14:50:14] -!- stsydow has quit [Remote host closed the connection]
[14:50:29] <skunkworks> JT-Shop: jthornton:
http://www.practicalmachinist.com/vb/bridgeport-hardinge-mills-lathes/1991-bridgeport-discovery-308-rebuild-retrofit-244122/
[14:51:39] -!- phantoxeD [[email protected]] has joined #linuxcnc
[15:01:34] <JT-Shop> sweet, thanks Sam
[15:02:42] <skunkworks> JT-Shop: is yours a 308?
[15:02:52] <JT-Shop> yep
[15:03:02] <skunkworks> wow - that is a nice looking cnc
[15:03:08] <skunkworks> (guts wise)
[15:03:43] <Tom_itx> 8 tool changer?
[15:03:49] <JT-Shop> aye
[15:04:07] <JT-Shop> slowest tool changer in the west or east or...
[15:04:25] <Tom_itx> how old is it?
[15:06:26] <JT-Shop> 20
[15:09:42] <skunkworks> JT-Shop: did you end up fixing it? (the tool changer)
[15:10:11] <JT-Shop> yes, it was a relay stuck closed on the tool changer board
[15:10:27] <JT-Shop> I had to remove the old one, solder on the new one and it's back to working
[15:10:48] <skunkworks> nice
[15:14:31] <andypugh> What's CNC11?
[15:20:23] <Tom_itx> ajax cnc?
[15:20:26] <Jymmm> Isn't that like a sherline?
[15:22:02] <Tom_itx> http://www.ajaxcnc.com/ajax-cnc-software-downloads/
[15:22:13] <andypugh> It seems to be Centroid.
[15:22:35] <Tom_itx> that's what it says
[15:23:25] <Tom_itx> mach3/centroid
[15:25:08] -!- tronwizard has quit []
[15:26:46] -!- mourner has quit [Quit: mourner]
[15:33:13] <skunkworks> yeck
[15:33:24] -!- tronwizard [[email protected]] has joined #linuxcnc
[15:35:23] <L84Supper> http://tinyurl.com/b3y9j88 a bit OT, but in searching for an ATM the other day I came across this, it's not a bank and had 16ft iron fence around it with no marking for what the place actually is
[15:35:50] <L84Supper> guard house and they got really nervous when i walked up and asked where the ATM was
[15:37:42] <L84Supper> there must be some website that lists discovered secret sites or shares info
[15:38:01] -!- joe9 has quit [Ping timeout: 244 seconds]
[15:38:10] <andypugh> The place I work at has an ATM inside it. That is probably what is being shown.
[15:38:12] -!- AR_ [[email protected]] has joined #linuxcnc
[15:38:56] <L84Supper> whats odd was no sign, a guard shack, iron security fences, and the ground is built up around it like a bunker
[15:39:24] <andypugh> L84Supper:
http://farm1.staticflickr.com/132/321262337_54fd36c8e5_z.jpg
[15:39:41] <L84Supper> lol
[15:39:43] <Jymmm> L84Supper: You expected signs that say "SUPER SECRET MILITARY RESEARCH FACILITY" ???
[15:40:08] <archivist> I did have to visit one and deliver....when it was secret
[15:40:27] <L84Supper> nah, just wondering what it was since it's 500' from residential
[15:40:31] <Loetmichel> Jymmm: some sign: "nothing to see here, walk on!" would be nice ;-)
[15:40:37] -!- joe9 [[email protected]] has joined #linuxcnc
[15:40:54] <L84Supper> the guards were really nervous when I walked up
[15:42:25] <Jymmm> Eh, unless you were looking down the barre of an M16 (been there, done that, same scenario), aint no thing =)
[15:43:27] <Jymmm> And I HAD permission, just didn't know I crossed boundary lines
[15:43:51] <Loetmichel> ... because therter were none painted on?
[15:43:54] <Loetmichel> there
[15:44:15] <Jymmm> No signs, 4ft tall weeds, the rest was abandoned
[15:48:18] <L84Supper> if you search for HSBC in the us on Google you'll get several places like this as a bank location, probably just secret Chinese spy HQ locations :)
[15:51:00] <L84Supper> http://wikimapia.org/13128791/HSBC-Volo-Data-Center hehe close
[15:55:38] -!- AR__ [[email protected]] has joined #linuxcnc
[15:58:24] -!- AR_ has quit [Ping timeout: 264 seconds]
[15:59:26] -!- skunkworks has quit [Remote host closed the connection]
[16:03:57] <pcw_home> does look like a big data center with all the fancy cooling stuff on the north side
[16:06:33] <Jymmm> Heh, you should see the Visa DC's, those are guarded very heavily
[16:06:42] -!- kwallace [[email protected]] has joined #linuxcnc
[16:07:11] <Jymmm> and not just by armed rent a cops either.
[16:09:26] -!- servos4ever [[email protected]] has joined #linuxcnc
[16:12:41] <L84Supper> http://www.youtube.com/watch?v=w2Cxmha3h6c did they have these?
[16:13:26] <Jymmm> Nah, just M16's
[16:22:41] -!- ler_hydra [[email protected]] has joined #linuxcnc
[16:38:38] -!- R2E4_ [[email protected]] has joined #linuxcnc
[17:09:38] -!- hdokes has quit [Ping timeout: 272 seconds]
[17:15:00] -!- hdokes [hdokes!~IceChat77@173-165-40-177-Illinois.hfc.comcastbusiness.net] has joined #linuxcnc
[17:16:15] putnik_ is now known as putnik
[17:26:02] -!- FinboySlick [[email protected]] has joined #linuxcnc
[17:37:56] -!- dgarr has quit [Ping timeout: 252 seconds]
[18:03:19] -!- nots has quit [Ping timeout: 260 seconds]
[18:03:56] -!- nots [[email protected]] has joined #linuxcnc
[18:09:07] -!- nots has quit [Ping timeout: 248 seconds]
[18:09:40] -!- SWPLinux has quit [Ping timeout: 248 seconds]
[18:10:34] -!- nots [[email protected]] has joined #linuxcnc
[18:10:59] -!- IchGuckLive [[email protected]] has joined #linuxcnc
[18:11:09] <IchGuckLive> hi
[18:15:43] -!- nots has quit [Remote host closed the connection]
[18:21:17] -!- nots [[email protected]] has joined #linuxcnc
[18:24:28] <R2E4_> yuk...... recompile..... damn
[18:24:53] <R2E4_> or get another com[puter
[18:25:07] <R2E4_> IBM SMI issues
[18:27:14] <IchGuckLive> smi is easy
[18:28:57] -!- IchGuckLive has quit [Quit: ChatZilla 0.9.87 [Firefox 18.0/20130108033621]]
[18:31:08] <r00t4rd3d> http://www.amazon.com/Richard-Kell-Solid-Dovetail-Marker/dp/B004ST239K
[18:31:14] <r00t4rd3d> someone mill me that plz :)
[18:32:58] <ReadError> you see my router vid r00t4rd3d?
[18:33:34] <ReadError> http://www.youtube.com/watch?v=UQ3Lisz1PMc
[18:36:40] -!- pjm has quit [Ping timeout: 246 seconds]
[18:37:54] <R2E4_> IchGuckLive: easy you say?
[18:38:14] <R2E4_> Icould use existing binary.
[18:51:42] -!- cncbasher_ [cncbasher_!~quassel@cpc15-hart9-2-0-cust101.11-3.cable.virginmedia.com] has joined #linuxcnc
[18:53:50] -!- zzolo has quit [Client Quit]
[18:55:46] -!- pjm [[email protected]] has joined #linuxcnc
[19:03:22] <R2E4_> I got an AMD64, will try that.
[19:03:27] -!- motioncontrol [motioncontrol!~io@host37-78-dynamic.10-87-r.retail.telecomitalia.it] has joined #linuxcnc
[19:06:27] -!- zzolo has quit [Quit: zzolo]
[19:24:12] -!- mhaberler has quit [Ping timeout: 264 seconds]
[19:30:00] -!- karavanjoW has quit [Quit: KVIrc 4.0.4 Insomnia http://www.kvirc.net/]
[19:34:17] -!- cncbasher_ has quit [Remote host closed the connection]
[19:34:17] -!- cncbasher has quit [Read error: Connection reset by peer]
[19:38:49] -!- Wildhoney has quit []
[19:39:48] -!- Keknom [[email protected]] has joined #linuxcnc
[19:42:46] -!- mhaberler [[email protected]] has joined #linuxcnc
[19:45:49] -!- asdfasd has quit [Ping timeout: 245 seconds]
[19:49:21] <r00t4rd3d> nice
[19:49:29] <r00t4rd3d> copy me that dust show
[19:49:33] <r00t4rd3d> shoe
[19:51:20] <ReadError> where i got it?
[19:52:14] -!- micges [[email protected]] has joined #linuxcnc
[19:57:00] -!- zzolo has quit [Ping timeout: 260 seconds]
[20:01:50] -!- tjtr33 [[email protected]] has joined #linuxcnc
[20:02:59] <tjtr33> L84Supper, the good small German trunnions got bought out by Hman, still great stuff
http://jauchschmider.com/default.aspx
[20:03:40] <tjtr33> L84Supper, and MMK ( and Sam the US rep) is now here in Prospect Hts
[20:04:01] -!- norbert has quit [Quit: Verlassend]
[20:04:16] <tjtr33> L84Supper, you can see the JS at the mits showroom in EGV if you like
[20:04:26] -!- mattions has quit [Ping timeout: 272 seconds]
[20:24:08] <L84Supper> tjtr33: the lead times are so long that we will end up making much of the stage in house
[20:25:29] <tjtr33> the arc sec precision and the 7+ inch radius make it tough, you got a bunch of good old toolmakers?
[20:25:32] <tjtr33> ;)
[20:26:22] <L84Supper> heh, plenty for hire and they prefer to use manual mills and lathes :)
[20:26:45] <L84Supper> and hand lap everything to 1um :)
[20:27:00] <tjtr33> thats what built NASA
[20:27:22] <tjtr33> l8r, good to talk
[20:27:25] -!- tjtr33 [[email protected]] has parted #linuxcnc
[20:33:50] -!- sumpfralle [[email protected]] has joined #linuxcnc
[20:40:01] -!- jp__ has quit [Ping timeout: 245 seconds]
[20:40:38] -!- jp__ [[email protected]] has joined #linuxcnc
[20:46:35] -!- jp__ has quit [Ping timeout: 252 seconds]
[20:47:01] -!- jp__ [[email protected]] has joined #linuxcnc
[20:49:14] -!- Wildhoney has quit [Client Quit]
[20:52:51] -!- zzolo has quit [Quit: zzolo]
[20:59:13] <R2E4_> how do I make a 5i22 config into a 5i25?
[21:00:52] <micges> R2E4_: explain
[21:02:24] <Jymmm> + 3 ?
[21:03:17] <R2E4_> I selected 5i22 in config selector because there is no 5i25.
[21:05:56] -!- pikeaero has quit [Remote host closed the connection]
[21:05:56] <cradek> are you talking about pncconf?
[21:06:32] -!- zzolo has quit [Read error: Connection reset by peer]
[21:06:34] zzolo_ is now known as zzolo
[21:07:24] <cradek> http://www.linuxcnc.org/index.php/english/forum/39-pncconf/21670-5i25-firmware-xml-files-for-pncconf
[21:09:56] -!- pikeaero [[email protected]] has joined #linuxcnc
[21:10:00] -!- pikeaero has quit [Read error: Connection reset by peer]
[21:11:30] <R2E4_> linux config selector
[21:13:24] -!- tronwizard has quit [Ping timeout: 264 seconds]
[21:22:07] -!- Keknom has quit [Quit: Leaving.]
[21:22:08] <pcw_home> I wouls take this sample file set: freeby.mesanet.com/7i77.zip
[21:22:10] <pcw_home> and unzip it in ~/linuxcnc/configs/hm2-servo
[21:22:13] <pcw_home> would
[21:22:54] <mhaberler> that config works fine, it should go in
[21:23:02] <pcw_home> Then you should have a 5i25-7i77 example in your selector
[21:24:08] <pcw_home> its just the hm2-servo example hal/ini with only the required changes
[21:24:33] -!- morfic- has quit [Remote host closed the connection]
[21:26:54] <pcw_home> (linuxCNC selector not pncconf)
[21:27:48] <cradek> new sample configs for new hardware are always welcome in point releases
[21:27:58] <cradek> now is your chance
[21:32:02] -!- adb [[email protected]] has joined #linuxcnc
[21:32:10] <pcw_home> that one and the 7I76 one should definitely go in
[21:33:02] <pcw_home> not sure about all my autogenerated 5i25 xml files dont know if pncconf likes them
[21:41:11] -!- hdokes has quit [Ping timeout: 255 seconds]
[21:48:58] -!- ler_hydra has quit [Remote host closed the connection]
[21:50:31] -!- zzolo has quit [Quit: zzolo]
[22:04:57] <DJ9DJ> gn8
[22:05:29] -!- DJ9DJ has quit [Quit: bye]
[22:06:15] -!- Cylly [[email protected]] has joined #linuxcnc
[22:06:42] -!- Loetmichel has quit [Ping timeout: 256 seconds]
[22:13:01] -!- micges has quit [Quit: Leaving]
[23:05:02] -!- odogono has quit [Quit: odogono]
[23:06:54] -!- asdfasd [[email protected]] has joined #linuxcnc
[23:09:03] <andypugh> Ooh, I wonder what I have done there? I accidentally typed "cd '/" instead of "cd ~/" and I am now in a funny command promt ( >) and nothing works...
[23:10:07] <andypugh> Ah, I think I see what it was, it was waiting for a closing '
[23:18:56] -!- Keknom [[email protected]] has joined #linuxcnc
[23:20:11] <mrsun> https://plus.google.com/photos/112857503660532884288/albums/5845629767575099665 my little creation! =)
[23:20:33] <ReadError> so my ghetto clamp came loose
[23:20:46] <ReadError> luckily i noticed it fast i thought there was something major wrong
[23:20:47] <ReadError> heh
[23:20:59] <andypugh> Ball-turning jig?
[23:21:18] <mrsun> yes
[23:21:19] <andypugh> Isn't that what CNC is for? :-)
[23:21:22] <mrsun> haha
[23:21:25] <mrsun> do not have cnc lathe
[23:21:39] <andypugh> Lathes are easy to convert.
[23:21:46] <andypugh> Well, the Z axes are.
[23:21:52] <mrsun> well do not want to convert this old lathe =)
[23:21:54] <andypugh> The X axes can be rather tricky.
[23:23:15] <andypugh> There is a lot tobe said for swapping the changewheels for a gear-tooth sensor, a stepper motor and a micro (Arduino, for example)
[23:24:25] -!- mhaberler has quit [Quit: mhaberler]
[23:25:49] <mrsun> only thing left to do on this one is fixerup on the tool holder, and oilgroves for the dovetails and sliding surfaces =)
[23:26:09] <mrsun> and maybe a chamfer on the bottom side of the burning thingie :P
[23:29:56] -!- The_Ball has quit [Ping timeout: 248 seconds]
[23:34:10] <cradek> pcw_home: have you figured out anything about sample configs or xml files? I would like to get started soon.
[23:40:05] <Tom_itx> build one
[23:45:20] -!- _ink has quit [Ping timeout: 256 seconds]
[23:46:15] -!- ve7it [[email protected]] has joined #linuxcnc
[23:52:59] -!- The_Ball_ [[email protected]] has joined #linuxcnc
[23:53:42] -!- ink [[email protected]] has joined #linuxcnc
[23:54:40] -!- pcw_home has quit [Remote host closed the connection]
