Back
[00:00:17] <Tom_itx> how often do you have to change tips?
[00:00:35] <Tom_itx> i think i'm running .030 wire right now
[00:01:05] <Tom_itx> either that or .025
[00:01:05] <andypugh> JT-Shop: How did the splitter turn out?
[00:01:05] <JT-Shop> usually they last 30-40 lbs but sometimes 5 minutes and bam they get welded shut
[00:01:31] <Tom_itx> what causes slag buildup around the nozzle?
[00:01:37] <Tom_itx> or is that a common issue
[00:01:42] <JT-Shop> andypugh: still working on it... been delayed by work stuff, customers you know want there machines
[00:01:46] <Tom_itx> maybe i'm sticking it too close
[00:02:18] <JT-Shop> I have a spring loaded cleaner and use some junk that you dip the nozzle in and it helps
[00:02:23] <Tom_itx> i run a 1/2" em thru mine once in a while
[00:02:29] <andypugh> Anti-spatter spray can help
[00:02:40] <JT-Shop> about 1/4" or so works for me
[00:02:51] <JT-Shop> I use the dip
[00:02:55] <Tom_itx> mmm
[00:03:15] <Tom_itx> 1/4" from the work to tip?
[00:03:43] <JT-Shop> yea maybe up to 3/8"... gotta watch the puddle not the arc
[00:03:47] <Tom_itx> yeah
[00:03:54] <Tom_itx> sounds about right
[00:04:14] <Tom_itx> well i think i had it pretty close... just wondered
[00:04:44] <Tom_itx> ever try aluminum wire in it?
[00:05:02] <JT-Shop> I have a spool gun for aluminum
[00:05:29] <Tom_itx> probably doesn't work as well as tig on aluminum does it?
[00:06:02] <L84Supper> the motor guy has the controller as well
[00:06:04] <JT-Shop> I tig thin aluminum but once you get thicker than 1/8" the spool gun is king
[00:06:15] <Tom_itx> pure argon?
[00:06:26] <JT-Shop> tig, yea
[00:06:32] <Tom_itx> mig aluminum..
[00:06:38] -!- bedah has quit [Quit: bye]
[00:07:02] <andypugh> AC MIG?
[00:07:09] <JT-Shop> you need one of these
http://espimages.biz/2386/I/604/0/AK107.jpg
[00:07:54] <Tom_itx> what the heck is that?
[00:08:04] <JT-Shop> nozzle cleaner
[00:08:09] <JT-Shop> works!
[00:08:22] <Tom_itx> i just run a reamer or endmill thru mine
[00:08:28] <JT-Shop> I think they are made down the street from Andy
[00:08:56] <JT-Shop> you pull the black knob back and insert the springs in and give it a twist and your clean
[00:12:28] <L84Supper> http://chicago.craigslist.org/nch/tls/3644788773.html Acroloc 100 Series 4 Axis CNC $2250
[00:13:00] -!- rob_h has quit [Ping timeout: 260 seconds]
[00:13:26] <L84Supper> what collet did they use?
[00:13:47] <JT-Shop> I love the c-clamp knob
[00:14:18] <PCW> andypugh did you commit the code to display sserial modes?
[00:14:56] <Tom_itx> those are some big honkin collets
[00:14:56] <andypugh> Aye/
[00:15:33] <PCW> were mucking about with the 7i73 code to
[00:15:34] <PCW> 1. support 2 key rollover
[00:15:36] <PCW> 2. list the software modes under the valid hardware modes
[00:16:22] <andypugh> My matrix_kb component supports variable rollover :-)
[00:16:30] <PCW> so at least if you print out the hardware modes is will make a bit more sense
[00:16:35] <L84Supper> the tool holders use AF(acura flex) collets
[00:17:09] <L84Supper> http://www.gpcollets.com/af_collets.html
[00:17:37] <andypugh> My logic is that if your keyboard is wired with diodes so that all scancodes are valid, then the component should cope.
[00:26:30] -!- alpha1125 has quit [Ping timeout: 264 seconds]
[00:29:23] -!- alpha1125 [[email protected]] has joined #linuxcnc
[00:31:47] <L84Supper> http://tinyurl.com/d67bwv3 Hardinge - AHC - (Automatic Hardinge Chucker) - CNC - Lathe $1800
[00:32:04] <PCW> in any case the 7I73 will just send deltas, all ups and what are effectively no-ops
[00:41:05] <L84Supper> http://www.ebay.com/itm/EMCO-CNC-LATHE-/251218849598?pt=LH_DefaultDomain_0&hash=item3a7dcf6f3e
[00:41:27] <L84Supper> they don't show much of the mechanics
[00:42:14] <L84Supper> what a rats nets of factory controller though
[00:42:24] -!- alpha1125 has quit [Ping timeout: 260 seconds]
[00:42:59] -!- alpha1125 [[email protected]] has joined #linuxcnc
[00:46:20] <andypugh> I don't see how the two spindles thing works.
[00:46:56] <L84Supper> I don't get it either
[00:47:02] <L84Supper> it needs more pics
[00:47:43] <andypugh> I suspect that there is a lot of machine there for $2750
[00:48:18] <L84Supper> https://www.youtube.com/watch?v=HaCiiLpJiO0 this Emco has opposing spindles
[00:48:20] <andypugh> Ah, there is a second tool turret at the bottom.
[00:49:10] <andypugh> Same machine I reckon.
[00:49:35] <L84Supper> might be worth it
[00:49:50] -!- alpha1125 has quit [Ping timeout: 255 seconds]
[00:52:02] -!- alpha1125 [[email protected]] has joined #linuxcnc
[00:52:07] <andypugh> It's cool and I want it :-)
[00:52:11] -!- alpha1125 has quit [Read error: Connection reset by peer]
[00:55:07] -!- ravenlock [ravenlock!~ravenlock@enlightenment/developer/ravenlock] has joined #linuxcnc
[00:55:56] <L84Supper> andypugh: if I get it can you come over and retrofit it? I won't have time until Sept. :(
[00:57:05] <andypugh> Pay me more than Ford, and maybe :-)
[00:57:32] -!- alpha1125 [[email protected]] has joined #linuxcnc
[00:58:07] <L84Supper> a good project for a summer intern
[00:58:17] <Tom_itx> that reminds me of the screw machines i used to run
[01:00:10] <Tom_itx> they weren't quite as fancy though
[01:03:13] <andypugh> I wonder if you can run it as an XZ/UW machine, or if the two spindles always have to make the same parts?
[01:03:47] <L84Supper> http://tinyurl.com/bwzgsl9 I like this CNC grinder as well
[01:04:00] <Tom_itx> i suppose it would do what it was programmed to do
[01:04:34] <L84Supper> they appear to be locked together
[01:04:48] <L84Supper> i wish they had more pics
[01:04:51] <Tom_itx> one spindle motor?
[01:05:05] <Tom_itx> or at least two in sync
[01:12:16] -!- Thetawaves has quit [Quit: Leaving]
[01:12:34] -!- Thetawaves [[email protected]] has joined #linuxcnc
[01:17:30] -!- FinboySlick [[email protected]] has joined #linuxcnc
[01:18:51] -!- tmcw has quit [Remote host closed the connection]
[01:19:32] <andypugh> I think it is one spindle motor. But I guess that the axes aren't perfect slaves or setting up the tool offsets would be painful.
[01:19:34] -!- L84Supper has quit [Ping timeout: 258 seconds]
[01:23:52] -!- tjb1 [[email protected]] has joined #linuxcnc
[01:32:45] -!- stsydow has quit [Quit: Verlassend]
[01:33:11] -!- Keknom [[email protected]] has joined #linuxcnc
[01:34:10] -!- L84Supper [L84Supper!~Larch@unaffiliated/l84supper] has joined #linuxcnc
[01:34:57] -!- andypugh has quit [Quit: andypugh]
[01:48:19] -!- ravenlock has quit [Ping timeout: 258 seconds]
[01:48:52] -!- MattyMatt has quit [Quit: Ex-Chat]
[01:49:21] -!- MattyMatt [MattyMatt!~matt@cpc15-birk8-2-0-cust115.1-3.cable.virginmedia.com] has joined #linuxcnc
[01:56:26] -!- alpha1125 has quit [Ping timeout: 256 seconds]
[02:00:42] -!- adb has quit [Ping timeout: 264 seconds]
[02:06:24] <MattyMatt> L84Supper, are you getting that acroloc?
[02:08:39] -!- MattyMatt has quit [Read error: Operation timed out]
[02:10:39] -!- cncbasher has quit [Quit: No Ping reply in 180 seconds.]
[02:10:40] -!- alpha1125 [[email protected]] has joined #linuxcnc
[02:11:55] -!- cncbasher [cncbasher!~quassel@cpc15-hart9-2-0-cust101.11-3.cable.virginmedia.com] has joined #linuxcnc
[02:15:47] -!- ravenlock [ravenlock!~ravenlock@enlightenment/developer/ravenlock] has joined #linuxcnc
[02:15:57] -!- skorasaurus has quit [Quit: left the building.]
[02:17:56] -!- Tecan [Tecan!~fasdf@unaffiliated/unit41] has joined #linuxcnc
[02:24:00] -!- MattyMatt [MattyMatt!~matt@cpc15-birk8-2-0-cust115.1-3.cable.virginmedia.com] has joined #linuxcnc
[02:24:42] -!- syyl_ has quit [Read error: Connection reset by peer]
[02:27:47] <L84Supper> MattyMatt: just looking around
[02:30:02] <L84Supper> if the ways are good it's probably worth it
[02:33:38] <L84Supper> http://www.acroloc.com/Acroloc/Acroloc%20Tooling.htm
[02:33:56] -!- tmcw has quit [Ping timeout: 258 seconds]
[02:48:47] -!- tmcw has quit [Remote host closed the connection]
[02:50:32] <r00t4rd3d> I talked to the PA guy about the 525 price
[02:50:33] <r00t4rd3d> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200542103383
[02:51:05] <jdh> that's about what I paid for my last one
[02:52:25] <r00t4rd3d> yeah he raised the price 4 bucks
[02:53:16] <jdh> did it help?
[02:53:55] -!- sumpfralle has quit [Ping timeout: 264 seconds]
[02:54:25] <r00t4rd3d> ?
[02:54:38] <r00t4rd3d> earlier the price was 175
[02:55:11] <jdh> not 85?
[02:55:24] <r00t4rd3d> yeah
[02:56:48] <r00t4rd3d> i might buy an extra
[02:58:38] <r00t4rd3d> now that they are discontinued some company that used them might upgrade and they will be used on ebay dirt cheap
[02:59:13] <jdh> let me know if they show up for < $50
[03:00:03] -!- RangerRick has quit [Remote host closed the connection]
[03:03:36] <r00t4rd3d> other companies still use the same chipset
[03:03:37] <r00t4rd3d> http://www.ebay.com/itm/Gigabyte-ga-d525tud-atom-d525-dual-core-1-8ghz-ddr3-sata-mini-itx-/171010290094?pt=US_Motherboard_CPU_Combos&hash=item27d101f1ae
[03:03:45] -!- Keknom has quit [Quit: Leaving.]
[03:03:56] <r00t4rd3d> im sure that would be the same experience as a intel
[03:05:59] <r00t4rd3d> or a bit more with built in power
[03:06:00] <r00t4rd3d> http://www.ebay.com/itm/Jetway-NC9I-525-OC-Atom-D525-Mini-ITX-Motherboard-w-On-board-DC-DC-Power-/130865219044?pt=Motherboards&hash=item1e782cc5e4
[03:15:46] <jdh> are they really the same as the intel boards though?
[03:17:18] <r00t4rd3d> they have the same chips
[03:17:31] <r00t4rd3d> only different companies have soldered them on
[03:17:56] <r00t4rd3d> http://i.imgur.com/HqNOYAv.jpg
[03:18:03] <r00t4rd3d> he almost made it!
[03:24:12] <r00t4rd3d> id like to see if these worked
[03:24:12] <r00t4rd3d> http://www.ebay.com/itm/ECS-945GCD-i230-INTEL-ATOM-i230-CPU-COMBO-KIT-DDR2-SATA-MINI-ITX-MOTHERBOARD-/330783133824?pt=Motherboards&hash=item4d04361080
[03:30:08] <r00t4rd3d> with something lighter then gnome it probably would
[03:38:47] <ReadError> r00t4rd3d rockin aspire4 yet?
[03:49:19] -!- zzolo has quit [Quit: zzolo]
[03:54:20] -!- AR_ has quit [Ping timeout: 252 seconds]
[03:55:05] <r00t4rd3d> nope
[03:57:29] <r00t4rd3d> http://www.vectric.com/support/program-updates.html
[03:57:35] -!- FinboySlick has quit [Quit: Leaving.]
[03:57:45] <r00t4rd3d> needs to show up there first but i think its a paid update only
[03:59:44] <r00t4rd3d> http://www.vectric.com/products/aspire/whats-new/v4/overview.html
[04:05:52] -!- uw [uw!~uw@unaffiliated/uw] has joined #linuxcnc
[04:05:55] -!- ravenlock has quit [Ping timeout: 258 seconds]
[04:06:39] <uw> so what is everyone using now to gcode generation?
[04:07:28] <uw> anything the new hotness?
[04:09:21] -!- tjb1 has quit [Quit: tjb1]
[04:11:16] <MattyMatt> slicer is still nicer
[04:12:25] <MattyMatt> I write most of my cnc gcode by hand these days, everything's a tradeoff between simplicity and quality
[04:13:19] <MattyMatt> I think cura is the best SF frontend these days, and kissslicer has fans but isn't free. I haven't tried those myslef
[04:39:45] -!- tjtr33 [[email protected]] has joined #linuxcnc
[04:39:56] -!- R2E4_ [[email protected]] has parted #linuxcnc
[04:43:24] <tjtr33> pcw_home, hello, is the vhdl code for the 32bit counters in 5i20.zip ? I'm not finding it :(
[04:46:22] -!- zzolo has quit [Quit: zzolo]
[04:47:56] <tjtr33> there's 16 bit timers inside the SoftDMC.zip timer.vhd
[04:50:40] -!- xxoxx [xxoxx!~xxoxx@tor/regular/xxoxx] has joined #linuxcnc
[04:51:39] <tjtr33> i'm looking for this "Several pre-made functions are provided"... "a 8 channel, 32 bit timer counter card capable of running at 100 MHz." mentioned in the 5i20 manual
[05:02:03] -!- dhoovie [[email protected]] has joined #linuxcnc
[05:08:12] <MattyMatt> uw apologies, I thought I was in #reprap. gcode is generated differently there
[05:17:06] <tjtr33> COUNTERS.VHD the 32 bit counter vhdl is in HOSTMOT not HOSTMOT2 ( i'm not yelling, the filenames are from dos i suppose)
[05:25:24] -!- Tugge [[email protected]] has joined #linuxcnc
[05:31:19] -!- jfire has quit [Quit: Leaving.]
[05:38:15] -!- tjtr33 [[email protected]] has parted #linuxcnc
[05:49:32] <pcw_home> Yes the Hostmot2 encoder counter is just 16 bits (top 16 bits of register is timestamp for velocity estimation)
[06:02:00] -!- Fox_Muldr has quit [Ping timeout: 264 seconds]
[06:03:37] -!- Fox_Muldr [[email protected]] has joined #linuxcnc
[06:04:32] -!- kwallace1 [[email protected]] has joined #linuxcnc
[06:05:44] -!- kwallace has quit [Ping timeout: 255 seconds]
[06:14:50] -!- vladimirek [[email protected]] has joined #linuxcnc
[06:20:51] -!- ve7it has quit [Remote host closed the connection]
[06:26:12] -!- mhaberler [[email protected]] has joined #linuxcnc
[06:53:34] -!- kwallace1 [[email protected]] has parted #linuxcnc
[07:07:05] -!- postaL has quit [Ping timeout: 245 seconds]
[07:14:16] -!- asdfasd [[email protected]] has joined #linuxcnc
[07:27:57] -!- postaL [[email protected]] has joined #linuxcnc
[07:31:04] -!- gimps has quit []
[07:31:23] -!- xxoxx has quit [Ping timeout: 258 seconds]
[07:31:45] -!- xxoxx [xxoxx!~xxoxx@tor/regular/xxoxx] has joined #linuxcnc
[07:42:25] -!- racycle has quit [Quit: racycle]
[07:45:09] -!- fomox [[email protected]] has joined #linuxcnc
[07:54:06] -!- jpk has quit [Ping timeout: 256 seconds]
[07:55:08] -!- DJ9DJ [DJ9DJ!~Deejay@unaffiliated/dj9dj] has joined #linuxcnc
[07:56:07] <DJ9DJ> moin
[07:57:04] -!- postaL has quit [Ping timeout: 245 seconds]
[07:59:30] -!- postaL [[email protected]] has joined #linuxcnc
[08:03:12] -!- fomox has quit [Ping timeout: 264 seconds]
[08:10:36] -!- emel has quit [Excess Flood]
[08:15:26] -!- fomox [[email protected]] has joined #linuxcnc
[08:20:05] -!- DeltaMal has quit [Read error: Connection reset by peer]
[08:36:59] -!- V0idExp [[email protected]] has joined #linuxcnc
[08:51:29] -!- fomox has quit [Ping timeout: 258 seconds]
[08:54:08] -!- dhoovie has quit [Ping timeout: 246 seconds]
[08:54:26] -!- ler_hydra [[email protected]] has joined #linuxcnc
[08:58:45] -!- fomox [[email protected]] has joined #linuxcnc
[09:10:54] -!- fomox has quit [Ping timeout: 264 seconds]
[09:15:15] -!- hjhart has quit [Ping timeout: 260 seconds]
[09:16:02] -!- fomox [[email protected]] has joined #linuxcnc
[09:19:20] -!- rob_h [[email protected]] has joined #linuxcnc
[09:26:37] -!- micges [[email protected]] has joined #linuxcnc
[09:30:24] -!- sadara [[email protected]] has joined #linuxcnc
[09:31:41] <sadara> Couple of question, what is the best way to connect a resolver based servo to emc?
[09:35:48] -!- fomox has quit [Ping timeout: 260 seconds]
[09:36:39] <sadara> and I'm looking for a servo drive for a AC servo, but I'm having trouble understanding the datasheet
[09:39:50] <sadara> For the first question, I was concidering the Mesa 7I49 resolver card, but have no idea what I'm doing
[09:41:00] <sadara> From what I understand of the datasheet, the servos can be driving by anything up to about 230Vrms
[09:42:39] -!- fomox [[email protected]] has joined #linuxcnc
[09:42:58] <sadara> link to datasheet
http://www.electromate.com/db_support/downloads/APIBT171SERIES.pdf however I only have one of that size, the others I have are larger, PN BT-0232ERA-R1LN
[09:47:18] -!- Thetawaves_ [[email protected]] has joined #linuxcnc
[09:54:33] Cylly is now known as Loetmichel
[09:54:43] <Loetmichel> mornin'
[09:56:54] -!- fomox has quit [Ping timeout: 256 seconds]
[09:57:46] <sadara> evening
[10:04:54] -!- mourner has quit [Quit: mourner]
[10:08:24] <sadara> I take it noone here uses ballscrews?
[10:08:31] <sadara> sorry, servo
[10:09:23] <archivist> plenty do use servo
[10:10:00] <archivist> best people to answer you though wont be on till later
[10:10:24] <sadara> about what time, (Just asking cause it's 6pm here atm)
[10:10:43] -!- Thetawaves_ has quit [Quit: This computer has gone to sleep]
[10:11:50] <archivist> US day time and UK evening all depends who is around on the day
[10:12:38] -!- PCW has quit [Remote host closed the connection]
[10:12:47] <sadara> cool, thanks
[10:19:02] -!- alex_joni has quit [Ping timeout: 252 seconds]
[10:21:51] jthornton_ is now known as jthornton
[10:23:46] -!- alex_joni [alex_joni!~alex_joni@emc/board-of-directors/alexjoni] has joined #linuxcnc
[10:23:46] -!- mode/#linuxcnc [+v alex_joni] by ChanServ
[10:26:55] -!- skunkworks has quit [Remote host closed the connection]
[10:30:14] -!- mackerski has quit [Quit: mackerski]
[10:33:54] <cncbasher_> sadra: what type of machine .. or what servo drives do you have old or new ?
[10:35:16] -!- b_b has quit [Changing host]
[10:50:27] -!- syyl [[email protected]] has joined #linuxcnc
[10:57:39] -!- mhaberler_ [[email protected]] has joined #linuxcnc
[11:00:00] -!- mhaberler has quit [Ping timeout: 260 seconds]
[11:00:01] mhaberler_ is now known as mhaberler
[11:00:08] -!- herron [[email protected]] has joined #linuxcnc
[11:07:05] -!- gene77 has quit [Remote host closed the connection]
[11:07:32] -!- gene77 [[email protected]] has joined #linuxcnc
[11:08:04] -!- Tecan has quit [Quit: Live Long And Phosphor!]
[11:08:22] -!- sumpfralle [[email protected]] has joined #linuxcnc
[11:10:58] -!- gimps [gimps!~noone@64-121-232-59.c3-0.eas-ubr3.atw-eas.pa.cable.rcn.com] has joined #linuxcnc
[11:15:39] -!- JT-Shop has quit [Read error: Connection timed out]
[11:16:24] -!- JT-Shop [[email protected]] has joined #linuxcnc
[11:17:32] -!- mourner has quit [Quit: mourner]
[11:19:00] R2E4_awy is now known as R2E4
[11:19:13] -!- Simooon [[email protected]] has joined #linuxcnc
[11:21:54] -!- mourner has quit [Client Quit]
[11:23:55] -!- stsydow has quit [Remote host closed the connection]
[11:26:12] -!- skunkworks [[email protected]] has joined #linuxcnc
[11:32:10] -!- ravenlock [ravenlock!~ravenlock@enlightenment/developer/ravenlock] has joined #linuxcnc
[11:33:24] <skunkworks> logger[ps
[11:33:27] <skunkworks> logger[psha],
[11:34:12] <skunkworks> 7 deg F here this morning..
[11:34:29] <skunkworks> chilly
[11:39:10] -!- Spida has quit [Ping timeout: 245 seconds]
[11:40:19] -!- fomox [[email protected]] has joined #linuxcnc
[11:40:58] <jthornton> we are supposed to get snow/sleet/ice this afternoon and tomorrow
[11:42:13] <skunkworks> yeck
[11:44:18] <jthornton> I might have time to find the lost screw and put the BlueWing back together...
[11:51:24] -!- Spida [[email protected]] has joined #linuxcnc
[11:52:23] <cncbasher_> arh forget the screw use blutack
[11:54:30] <ReadError> makin quad frames cncbasher?
[11:56:06] <jthornton> I'm pretty sure the screw is not in the bike... I removed everything from the gas tank back that could harbor a screw sized object
[11:56:37] -!- cncinator [[email protected]] has joined #linuxcnc
[11:57:42] <cncbasher_> jt: you'l have lost it miles back when the Mrs Pulled it out and said whats this !
[11:58:23] <cncbasher_> u didnt reply so she thrown it
[11:58:47] <cncbasher_> ReadError: yea iv'e made a few
[11:59:40] <ReadError> thats what i use mine for too ;)
[11:59:43] <ReadError> any pics?
[12:00:30] <cncbasher_> actualy now u ask , no i dont think i have
[12:00:53] <cncbasher_> more interested in flying than pics haha
[12:01:43] -!- sumpfralle has quit [Ping timeout: 264 seconds]
[12:07:55] -!- Valen [[email protected]] has joined #linuxcnc
[12:10:22] <ReadError> cncbasher: this is what ive been making:
https://dl.dropbox.com/u/25091878/Photo%20Mar%2007%2C%209%2014%2046%20PM.jpg
[12:10:49] <cncbasher_> hey thats neat
[12:11:19] <cncbasher_> is it acrylic your using ?
[12:11:24] <ReadError> g10
[12:11:50] <cncbasher_> yea look good
[12:12:25] <jthornton> cool quad
[12:13:34] <ReadError> http://www.youtube.com/watch?v=UQ3Lisz1PMc
[12:13:36] <ReadError> new machine
[12:13:46] -!- fomox has quit [Ping timeout: 256 seconds]
[12:14:32] <cncbasher_> i'm tempted to see if the laser will cut G10
[12:15:08] <cncbasher_> i now know why i dont use a router ! ,, the noise is terrific haha
[12:15:31] <ReadError> i got headphones and music to avoid that ;)
[12:17:27] <cncbasher_> i'm just working out the electronics side at the moment , figuring out which way to jump
[12:17:39] <ReadError> of the quad?
[12:18:06] <ReadError> i like the naze32
[12:20:05] -!- Youdaman has quit []
[12:21:26] -!- ravenlock has quit [Ping timeout: 252 seconds]
[12:23:36] <cncbasher_> dont think iv'e seen that one
[12:23:57] <cncbasher_> it's a few years since i last made some
[12:24:39] <cncbasher_> at the moment i need a test bench for some electronics
[12:25:03] <cncbasher_> so looking at building a more up to date quad
[12:25:35] <cncbasher_> last one i did was a meter between props
[12:26:41] <cncbasher_> but at the time the nav system was a bit noisy and started interfering
[12:27:28] <cncbasher_> so i pushed it to one side for a while , and just now resurecting it
[12:28:29] -!- fomox [[email protected]] has joined #linuxcnc
[12:28:50] -!- cncinator has quit [Ping timeout: 258 seconds]
[12:28:51] <jthornton> wow I just created a kml file with php
[12:38:05] -!- zenek [[email protected]] has joined #linuxcnc
[12:40:14] <zenek> nick /micges_work
[12:40:25] zenek is now known as micges_work
[12:40:57] * micges_work needs more coffee
[12:41:08] * skunkworks is brewing some
[12:42:40] -!- fomox has quit [Ping timeout: 256 seconds]
[12:45:08] <R2E4> too tired to get up and get some
[12:46:44] <archivist> hmm coffee time
[12:48:51] <Valen> bed time you fools its midnight
[12:49:54] -!- krusty_ar has quit [Remote host closed the connection]
[12:50:24] * skunkworks has no problem drininking coffee before bed..
[12:51:12] <R2E4> ReadError: What material is that?
[12:53:20] -!- alpha1125 has quit [Ping timeout: 252 seconds]
[12:53:57] -!- alpha1125 [alpha1125!~textual@nat/cisco/x-hltvrflszbboopuz] has joined #linuxcnc
[12:56:08] -!- Valen has quit [Quit: Leaving.]
[12:58:22] <ReadError> R2E4: G10/Garolite
[13:10:05] -!- b_b has quit [Ping timeout: 260 seconds]
[13:10:20] -!- b_b has quit [Changing host]
[13:10:32] -!- syyl_ [[email protected]] has joined #linuxcnc
[13:12:01] -!- AR__ [[email protected]] has joined #linuxcnc
[13:13:50] -!- syyl has quit [Ping timeout: 256 seconds]
[13:21:50] -!- emel has quit [Excess Flood]
[13:23:50] -!- fomox [[email protected]] has joined #linuxcnc
[13:24:59] -!- cncinator [[email protected]] has joined #linuxcnc
[13:28:26] -!- FinboySlick [[email protected]] has joined #linuxcnc
[13:30:08] <FinboySlick> L84Supper, pcw_home: I got this in my daily spam today:
http://www.portwell.com/automation/ I didn't know Portwell went for automation.
[13:31:52] -!- Simooon has quit [Remote host closed the connection]
[13:32:38] -!- emel has quit [Excess Flood]
[13:34:14] <L84Supper> http://www.portwell.com/products/IO.asp#DIGITAL_PCIPCI
[13:34:22] <AR__> wow
[13:34:54] <AR__> so i ordered a B&S Bestest DTI like 2 days ago and it will be delivered today
[13:35:03] <AR__> all the way across the country
[13:36:20] <AR__> and got it for $30
[13:45:29] <L84Supper> FinboySlick: they have made some interesting boards over the years
http://www.portwell.com/products/Contec_IO.asp#Motor_Control is where they hide the motion control cards
[13:47:13] <L84Supper> the motion control boards use a motor control IC in the PCL6100 series from Nippon Pulse Motor Co., Ltd.,
[13:47:42] <L84Supper> http://www.npmt.com.tw/chip-pcl6100.htm
[13:47:46] <FinboySlick> L84Supper: Are those good?
[13:48:14] <FinboySlick> And I was mostly just wondering if they design the mobos these plug into with motion control in mind.
[13:48:24] <L84Supper> http://www.npmt.com.tw/basic-specifications-pcl-pcd.htm
[13:48:40] <L84Supper> they are just PCI based, they will work in any PCI MB
[13:49:30] -!- fomox has quit [Ping timeout: 256 seconds]
[13:49:53] <FinboySlick> L84Supper: I meant the pre-built motion control computers that were in my initial link, not the motion control cards themselves.
[13:50:27] -!- phantoneD [[email protected]] has joined #linuxcnc
[13:50:28] <FinboySlick> They mention windows so I assume they aren't really caring about realtime performance of the OS.
[13:50:52] -!- cncinator has quit [Ping timeout: 258 seconds]
[13:51:07] <L84Supper> http://www.portwell.com/automation/ this link? These are just rack mount systems with a ATX MB and PCI cards
[13:51:56] <L84Supper> i haven't seen any linux support for the PCL6100 series
[13:52:15] <L84Supper> http://www.npmt.com.tw/basic-specifications-pcl-pcd.htm
[13:52:47] <L84Supper> http://www.npmt.com.tw/explanation-functions.htm
[13:54:03] <L84Supper> http://www.npmt.com.tw/motionnet.htm
[13:54:06] -!- alpha1125 has quit [Ping timeout: 264 seconds]
[13:54:09] -!- phantoxeD has quit [Ping timeout: 276 seconds]
[13:55:46] <L84Supper> http://www.npmt.com.tw/download/Motionnet/Introduction%20of%20Motionnet.pdf
[13:56:51] <L84Supper> they have their own shop floor bus, but only drivers for win2K, XP and DOS
[13:57:43] <L84Supper> hehe, yet their data sheet is titled "Substantial User Software"
[13:57:57] -!- alpha1125 [[email protected]] has joined #linuxcnc
[13:58:55] -!- Celelibi has quit [Excess Flood]
[13:59:03] -!- phantoxeD [[email protected]] has joined #linuxcnc
[13:59:19] <jdh> if I have a 24mm OD bearing. How big should the bearing holder be?
[13:59:44] -!- Wildhoney has quit [Ping timeout: 256 seconds]
[13:59:58] <L84Supper> jdh: what material for the holder?
[14:00:17] <jdh> 6061 for the prototype, tool steel for the final version
[14:00:17] <AR__> make it 23.5mm and press fit
[14:00:32] -!- cncinator [[email protected]] has joined #linuxcnc
[14:00:46] <cpresser_> it also depends on which kind of OD that 24mm is
[14:00:59] <cpresser_> i have books an tables for 'fits' (
http://de.wikipedia.org/wiki/Passung)
[14:01:14] <L84Supper> 0.5mm interference fit!? does he have a large press?
[14:01:34] <jdh> I have a 12? ton press
[14:01:34] <AR__> yes
[14:01:35] <cradek> yeah I don't think that was meant as actual advice
[14:01:47] <jdh> but, that seems excessive for a bearing.
[14:01:59] -!- phantoneD has quit [Ping timeout: 256 seconds]
[14:02:38] -!- alpha1125 has quit [Ping timeout: 252 seconds]
[14:02:42] <L84Supper> jdh: what type of load is the bearing going to experience?
[14:02:47] -!- servos4ever [[email protected]] has joined #linuxcnc
[14:02:57] <cpresser_> most likeley the bearging is "24h7" which indicates its maximimum diameter is 24mm, its minimum is 24mm-0.021mm
[14:03:15] -!- Celelibi [Celelibi!~celelibi@2a02-8426-50a1-9d00-021b-2fff-fe35-963d.rev.sfr.net] has joined #linuxcnc
[14:03:15] herron is now known as archivist_herron
[14:03:28] <cpresser_> the bore as 24H7 is 24mm+0.021mm
[14:03:47] <cpresser_> which gives you a transition-fit
[14:03:51] <L84Supper> any axial forces?
[14:04:08] <AR__> ok so then at most 23.9mm
[14:04:37] <archivist_herron> press fit is .001 " per inch of diameter as a rule of thumb
[14:04:43] <cradek> I'd guess more like 23.95 (.03-.05 interference)
[14:04:58] <L84Supper> that sounds about right
[14:05:16] <cpresser_> http://www.pfeffer.ch/toleranzen.htm (unfortunately i lack the language skills to find an english page)
[14:05:23] -!- Celelibi has quit [Excess Flood]
[14:05:26] <cradek> in Al anyway. for steel you might want it bigger?
[14:05:28] <archivist_herron> but is the bearing designed for press fit or sliding fit
[14:05:41] <AR__> archivist_herron, so a 1" OD will press fit into a .999" ID?
[14:05:48] <cradek> it's true, the bearing manufacturer's opinion would be better than all of ours
[14:05:50] <archivist_herron> the clearance of the balls is different
[14:06:31] <L84Supper> will the axial forces want to push or pull the bearing from the holder?
[14:06:45] <AR__> yes
[14:07:08] <cpresser_> check "DIN ISO 286-1"
[14:07:09] <cradek> I've definitely had bearings get "tight feeling" when press-fit
[14:07:10] -!- alpha1125 [[email protected]] has joined #linuxcnc
[14:07:20] <cradek> I assume that means I did it wrong
[14:07:47] <AR__> pre-load
[14:08:05] <archivist_herron> SKF bearing book/catalogue has a lot of advice
[14:08:27] <cpresser_> http://files.engineering.com/download.aspx?folder=441ec3ff-d975-49be-8432-8d3051b8436a&file=ISO_286-1-2010.pdf
[14:08:45] -!- Celelibi [Celelibi!~celelibi@2a02-8426-50a1-9d00-021b-2fff-fe35-963d.rev.sfr.net] has joined #linuxcnc
[14:09:17] <L84Supper> depends on how tight, ever work on auto wheel bearings? you often tighten and then measure preload
[14:10:00] <L84Supper> FinboySlick:
http://www.npmt.com.tw/download/PCL%20SeriesPCD%20Series/PCL6000%20series/PCL6046%284-axis%29/PCL6046_User%27s_manual090807.pdf with register specs, not sure how complete though
[14:11:30] -!- alpha1125 has quit [Ping timeout: 252 seconds]
[14:13:09] <FinboySlick> L84Supper: Most of this is a bit over my head. This was more about the potential for a good, relatively powerful mobo for LinuxCNC, assuming that Portwell would design the motherboard with system latency in mind.
[14:14:37] -!- alpha1125 [[email protected]] has joined #linuxcnc
[14:15:36] <L84Supper> FinboySlick: nah, just standard stuff with Phoenix or similar BIOS
[14:15:55] <L84Supper> I've talked about coreboot with them before
[14:16:02] -!- cncinator has quit [Read error: Connection reset by peer]
[14:18:45] <FinboySlick> L84Supper: Is coreboot affected by the spread of UEFI? I'm thinking that since they tend to be much larger, it would mean more room on the typical motherboard bios chip, but then there's secureboot too.
[14:19:58] <L84Supper> FinboySlick: we used to cram coreboot in 256KB of flash so 1-2MB is enough for coreboot + Linux kernel
[14:20:42] <FinboySlick> In many boards, it's 32Mbit/4MB now.
[14:21:15] -!- alpha1125 has quit [Ping timeout: 256 seconds]
[14:21:44] -!- kwallace [[email protected]] has joined #linuxcnc
[14:23:09] -!- cncinator [[email protected]] has joined #linuxcnc
[14:25:35] -!- tomate__ has quit [Ping timeout: 246 seconds]
[14:26:07] -!- alpha1125 [alpha1125!~textual@nat/cisco/x-ywywllxgkiremgnk] has joined #linuxcnc
[14:32:09] -!- cncinator has quit [Read error: Connection reset by peer]
[14:34:13] <L84Supper> FinboySlick: the Mesa boards use FPGA's so the hardware may be customized, the Portwell boards use an ASIC that only lets you modify register settings
[14:35:21] <L84Supper> need some extra counters of some IO for something specific, it's not a problem with Mesa, with portwell you might have to add another board or add an FGPA card to do the same thing
[14:35:48] <FinboySlick> L84Supper: I'm definitely keener on mesa, though it's a bit moot with my mill. I can already drive it faster than its rigidity allows for accurate parts.
[14:36:29] -!- AR__ has quit [Ping timeout: 255 seconds]
[14:36:43] -!- cncinator [[email protected]] has joined #linuxcnc
[14:38:14] <L84Supper> I need a transporter so I can move equipment around the world faster..... already working on the replicator.... anyone free?
[14:39:38] <cncinator> did you tried it wth a catapult?
[14:40:35] <FinboySlick> Actually, the CIA killed a canadian dude who could have helped with that when he tried to sell his design to Saddam ;)
[14:41:27] <FinboySlick> Because when you build a gun that can put satellites in orbit, it's best not to sell it to a despot.
[14:41:56] -!- Wildhoney has quit [Ping timeout: 256 seconds]
[14:42:02] <cncinator> are there any formal requirments for shooting sattelites in the orbit?
[14:42:35] <FinboySlick> cncbasher: I think you have to be good at math ;)
[14:42:45] <L84Supper> in the US there is
[14:42:53] <cncinator> im not basher ^^
[14:42:54] <L84Supper> not sure about Canada
[14:44:13] <cncinator> lets say we start our rocket with a simple sattelite onboard at sea
[14:44:13] <skunkworks> cncinator, did you get a better video ;)
[14:44:47] <cncinator> skunkworks, i crashed yesterday - have to recalibrate evry fuckin tool befor i can go on :(
[14:45:01] <skunkworks> ouch
[14:45:10] <skunkworks> what was the malfunction?
[14:45:19] -!- sumpfralle [[email protected]] has joined #linuxcnc
[14:45:19] <cncinator> G0 ^
[14:45:21] <cncinator> ^^
[14:45:29] <FinboySlick> cncinator: Sorry about that, tab error.
[14:45:52] -!- alpha1125 has quit [Ping timeout: 272 seconds]
[14:46:49] <skunkworks> I once inverted X and Z... Sheared a 3/4 inch aluminum shaft right off..
[14:47:16] <cncinator> turned OD with a ID tool, then i g0X instead of g0Z and my lathe turret moved about 5degree
[14:47:44] <cncinator> thats wasted time, sad
[14:47:51] <skunkworks> yep
[14:48:05] -!- alpha1125 [alpha1125!~textual@nat/cisco/x-ckfugybswthfihvn] has joined #linuxcnc
[14:49:52] <cncinator> guess ill have to buy a keychain-cam and mount it to the turret for some videos, my android sucks hard on it :(
[14:52:28] -!- cncbasher_ [cncbasher_!~quassel@cpc15-hart9-2-0-cust101.11-3.cable.virginmedia.com] has parted #linuxcnc
[14:53:39] -!- cncbasher has quit [Remote host closed the connection]
[14:56:26] -!- mackerski has quit [Read error: Operation timed out]
[14:56:34] <cncinator> http://www.ebay.de/itm/Mini-808-Car-Key-Chain-Hidden-Camera-Digital-Video-Recorder-Card-New-720-x-480-/300630138086?clk_rvr_id=460861934474
[14:57:22] <cncinator> i allready owned one of these, did great videos, usb mode, webcam etc
[14:57:30] -!- kwallace1 [[email protected]] has joined #linuxcnc
[14:59:45] -!- kwallace has quit [Ping timeout: 260 seconds]
[15:11:32] -!- fomox [[email protected]] has joined #linuxcnc
[15:12:26] -!- fatpandas has quit [Remote host closed the connection]
[15:13:54] -!- fatpandas [[email protected]] has joined #linuxcnc
[15:14:52] -!- emel has quit [Excess Flood]
[15:15:23] -!- mackerski has quit [Quit: mackerski]
[15:16:44] -!- cncbasher [cncbasher!~quassel@cpc15-hart9-2-0-cust101.11-3.cable.virginmedia.com] has joined #linuxcnc
[15:17:16] -!- toastydeath has quit [Read error: Connection reset by peer]
[15:22:49] -!- mhaberler has quit [Quit: mhaberler]
[15:22:57] -!- ve7it [[email protected]] has joined #linuxcnc
[15:23:26] -!- micges_ [[email protected]] has joined #linuxcnc
[15:23:31] -!- zenek_ [[email protected]] has joined #linuxcnc
[15:26:39] -!- micges_work has quit [Ping timeout: 245 seconds]
[15:26:48] -!- hdokes [hdokes!~IceChat77@173-165-40-177-Illinois.hfc.comcastbusiness.net] has joined #linuxcnc
[15:26:55] -!- micges has quit [Ping timeout: 264 seconds]
[15:31:12] <L84Supper> cncinator: do you use that in Germany?
[15:33:17] <cncinator> i live in austria, why?
[15:35:10] -!- toastydeath [toastydeath!~toast@2601:a:2e00:aa:84b3:720a:32e0:b751] has joined #linuxcnc
[15:35:10] <L84Supper> cncinator: privacy laws, some are tougher there than in the US
[15:36:16] <cncinator> same in europe, but for taking videos in my toolshed i wont get locked away
[15:37:05] -!- alpha1125 has quit [Ping timeout: 260 seconds]
[15:37:06] <skunkworks> Says you! ;)
[15:37:16] <cncinator> xD
[15:37:47] <Err> depends on who's in the toolshed with you :-)
[15:38:00] <cncinator> in europe, mainly mid europe you wont visit the jail that fast as in the us
[15:38:36] <cncinator> yes, ofc - just check if they hit 16 :>
[15:39:32] <Err> heh
[15:40:22] -!- alpha1125 [[email protected]] has joined #linuxcnc
[15:41:24] <FinboySlick> cncinator: I wouldn't put it past the EU to pass laws on toolshed privacy.
[15:42:00] <Err> heh, I'm totally down with privacy laws - we could all use a little more
[15:43:26] -!- tjb1 [[email protected]] has joined #linuxcnc
[15:43:31] <L84Supper> it becomes more problematic to run a police state when you have privacy laws, at least on the surface
[15:43:41] <cncinator> noone will denounce you for owning a spy cam, they may denounce you for what youre doing with it
[15:44:13] <L84Supper> nothing painful I hope :)
[15:44:59] -!- sumpfralle has quit [Read error: No route to host]
[15:45:38] <cncinator> in europe, law needs to evince that youre guilty
[15:45:43] -!- sumpfralle [[email protected]] has joined #linuxcnc
[15:46:19] <cncinator> and as harddiskdrives of really bad/mad people are crypted, law cant do a **** on those people
[15:46:33] <R2E4> Is the logic for the flooding and coolant usually done with LinuxCNC and interfaced with relays?
[15:46:43] -!- karavanjoW_ has quit [Ping timeout: 264 seconds]
[15:49:09] <pcw_home> M7,M8,M9 and Relays or SSRs
[15:56:18] -!- ravenlock [ravenlock!~ravenlock@enlightenment/developer/ravenlock] has joined #linuxcnc
[16:00:43] <R2E4> thanks
[16:01:14] -!- alpha1125 has quit [Ping timeout: 245 seconds]
[16:03:21] -!- alpha1125 [[email protected]] has joined #linuxcnc
[16:04:57] -!- IchGuckLive [[email protected]] has joined #linuxcnc
[16:05:21] <IchGuckLive> hi all B)
[16:08:04] -!- AR__ [[email protected]] has joined #linuxcnc
[16:13:15] -!- alpha1125 has quit [Ping timeout: 276 seconds]
[16:16:19] -!- alpha1125 [alpha1125!~textual@nat/cisco/x-agdrgatmqykukxpr] has joined #linuxcnc
[16:22:16] -!- cncinator has quit [Ping timeout: 260 seconds]
[16:29:19] -!- xxoxx has quit [Ping timeout: 264 seconds]
[16:29:33] <IchGuckLive> by till 19:00 MEZ
[16:29:37] -!- IchGuckLive [[email protected]] has parted #linuxcnc
[16:49:16] -!- zzolo has quit [Quit: zzolo]
[16:52:17] -!- tmcw has quit [Remote host closed the connection]
[17:04:06] -!- mourner has quit [Quit: mourner]
[17:08:41] -!- ler_hydra has quit [Remote host closed the connection]
[17:11:48] <Loetmichel> re @ home
[17:14:24] -!- dway has quit [Quit: NOOOOOOooooooooo……]
[17:17:18] <FinboySlick> L84Supper: I was watching a few youtubes of people attempting to recylce HD heads into laser galvanometers last night.
[17:21:03] <Loetmichel> FinboySlick: hmmm
[17:21:11] <Loetmichel> WAY to much mass
[17:21:17] <Loetmichel> -> to slow ;-)
[17:21:39] <FinboySlick> Loetmichel: I agree, though for a ghetto laser show, it'd probably still work.
[17:21:55] <FinboySlick> IF you get rid of the actual head and just use the actuator, which is usually plastic.
[17:22:04] <Loetmichel> with lissajous figures: maybe
[17:22:23] <Loetmichel> with anything "drawn" with right angles: no ;-)
[17:23:39] <Loetmichel> FinboySlick: the acuator sits usually on a 1/4" or bigger shaft with two ball bearings
[17:23:56] <FinboySlick> Do they make piezo-actuated galvanometer? For a set scan rate, I'd assume those would be very fast.
[17:24:05] <Loetmichel> that alone has to much mass for anything abpve a few kHz ;-)
[17:24:29] <FinboySlick> They'd have to be very small to get any meaningful angle.
[17:24:54] <Loetmichel> not necessarily
[17:24:59] <Loetmichel> man piezo stack
[17:25:39] <FinboySlick> There'd be a mass advantage to make them small too though.
[17:26:31] <Loetmichel> thats right
[17:26:37] <FinboySlick> I imagine that this is how DLP works, piezo-actuated mirrors.
[17:26:51] <Loetmichel> but jou have to stay bigger than the laser dot ;-)
[17:27:15] <L84Supper> yeah, they make piezo galvo type mirrors
[17:28:27] <Loetmichel> right, dlp = masses of VERY tiny piezo mirrors on a SI-bed
[17:30:42] <L84Supper> http://www.physikinstrumente.com/en/products/prdetail.php?sortnr=300710 $8K heh
[17:32:05] -!- nunya [[email protected]] has joined #linuxcnc
[17:36:17] -!- Thetawaves_ [[email protected]] has joined #linuxcnc
[17:38:02] -!- Michael__ [[email protected]] has joined #linuxcnc
[17:41:18] -!- steves_logging [[email protected]] has joined #linuxcnc
[17:41:55] <pcw_home> DLPs are electrostatic
[17:42:11] -!- tomate_ has quit [Remote host closed the connection]
[17:46:05] <L84Supper> http://www.ti.com/lit/an/dlpa008/dlpa008.pdf TI's DMD paper
[17:46:09] -!- V0idExp has quit [Quit: Leaving.]
[17:47:52] <pcw_home> I have a couple DLP chips around here, interesting under the microscope
[17:48:43] <L84Supper> TI was awarded a very broad patent on the tech, they are going to have a fit when they get bypassed by better tech
[17:49:43] -!- cncinator [[email protected]] has joined #linuxcnc
[17:50:13] <pcw_home> aren't laser projectors supplanting these anyway?
[17:50:46] -!- IchGuckLive [[email protected]] has joined #linuxcnc
[17:51:05] <L84Supper> http://www.youtube.com/watch?v=gF4HG6v29UY Casio Laser projector burns some stuff
[17:51:44] <pcw_home> I looked a little at white led on/off times and may are quite fast so 1 Usec pulses are possible (With some yellow tailing)
[17:51:49] <IchGuckLive> the co2 lasers got belw 400USD so it will be part of time to be CNC stufff
[17:52:00] <pcw_home> s/may/many/
[17:52:42] <L84Supper> high power LED prices are dropping like rocks
[17:52:48] <pcw_home> so a 100W (about $22) white LED might be a pretty decent strobe down to 1 usec or so
[17:53:06] <pcw_home> blue is good to 10 nS or so
[17:53:44] <L84Supper> 2 months ago I paid $30 for a 1w 405nm, yesterday I paid $3
[17:53:45] <IchGuckLive> the 100W china Neodyn lasers are also afortable
[17:53:49] <pcw_home> (assumin you have a decent driver)
[17:55:39] <pcw_home> Dont know about the white ones, but you can overdrive about 5X current for short duty cycles and get maybe 3X flux
[17:55:50] <pcw_home> (on blue)
[17:56:39] <L84Supper> it's however you can cool them is pretty much the limiting factor
[17:56:49] <pcw_home> No need
[17:57:17] <pcw_home> were talking 1% or lower duty cycles
[17:57:39] <L84Supper> I was commenting on CW
[17:57:44] <pcw_home> (strobe usage)
[17:58:24] <IchGuckLive> diode from Pinoeer BDR-205BK (12x)
[17:58:28] <IchGuckLive> 580W
[17:58:32] <IchGuckLive> mW
[17:58:56] <IchGuckLive> that gives you a good start for burning down the house
[18:00:30] <L84Supper> http://www.microvision.com/technology/picop.html
[18:01:21] <L84Supper> http://stks.freshpatents.com/MVIS-sym.php
[18:03:04] <pcw_home> Jeez theres got to be prior art for lissajous scanners from the 30s
[18:03:31] <L84Supper> doesn't stop a patent anymore
[18:04:01] <L84Supper> they just file and many get approved with the attitude to let the courts sort it out
[18:05:04] <IchGuckLive> pcw_home: is a modern PC cooler enoph to cool a 100W LED
[18:07:02] <pcw_home> I think so , that seems to be what people use
[18:07:51] <IchGuckLive> 35V is pretty high at 3.5A
[18:10:14] <pcw_home> well that 100W in, not sure what the luminous efficiency is by most of that winds up as heat
[18:10:15] <IchGuckLive> tjb?
[18:10:55] -!- andypugh [andypugh!~andy2@cpc16-basl9-2-0-cust685.20-1.cable.virginmedia.com] has joined #linuxcnc
[18:11:35] <FinboySlick> http://www.lemoptix.com/technology/innovation/scanning-micromirror That's a pretty cool little chip.
[18:12:06] <IchGuckLive> we will see a change in techiks on lightning
[18:12:18] <IchGuckLive> as the tecnologia chenges
[18:12:55] <IchGuckLive> if the US get all there monster Fresers of it will be drop at 40% in power request
[18:13:29] <IchGuckLive> ice mashines and aircooler drops that 2 65%
[18:14:03] <IchGuckLive> so the south states wil get solar powerd up to 95%
[18:14:58] <pcw_home> FinboySlick: a couple of those and a blue laser would make a nice photo-polymer 3d setup
[18:15:10] <andypugh> FinboySlick: They don't show it, but I think that a gymbal-style arrangment ought to allow 2D scannning?
[18:16:56] <FinboySlick> pcw_home: That's exactly what I was thinking. I wonder if they make fpga big enough to store a decent frame buffer. Two chips, one fpga and a laser gets you a complete setup you can just push slices to.
[18:17:47] <pcw_home> My dentist gave me a bit of the tooth repair photopolymer to hold in my hand while he hardened it with the blue LED
[18:17:49] <pcw_home> Amazingly fast transition from putty to rock
[18:18:22] <pcw_home> Probably only need a line buffer
[18:18:29] <pcw_home> and thats easy
[18:20:08] -!- micges_ has quit [Quit: Leaving]
[18:20:33] <FinboySlick> pcw_home: Their picoprojector uses a x/y mirror too.
[18:23:42] -!- Thetawaves_ has quit [Quit: This computer has gone to sleep]
[18:26:43] R2E4 is now known as R2E4_awy
[18:27:14] -!- Michael___ [[email protected]] has joined #linuxcnc
[18:27:39] <cncinator> can someone tell me why all my tools are 0,25mm off?
[18:28:01] <cncinator> no fixture loaded and 3 times referenced
[18:28:24] <IchGuckLive> G92 in place ?
[18:28:30] <cncinator> nope
[18:28:44] <IchGuckLive> did you check the parameters
[18:28:56] <IchGuckLive> in the parameter file
[18:29:09] <IchGuckLive> Backlash ?
[18:29:21] -!- Nick001-Shop [[email protected]] has joined #linuxcnc
[18:29:45] -!- Michael__ has quit [Ping timeout: 276 seconds]
[18:29:57] <cncinator> it worked fine, had a 15min programm running, then i switched the workpiece side to machine the other end and now all tools are exactly 0.25mm off..
[18:30:55] <IchGuckLive> did you use the same corner for touching
[18:31:04] <IchGuckLive> corner is straight
[18:31:10] <cncinator> lathe?
[18:31:43] <IchGuckLive> im out 1
[18:31:54] <IchGuckLive> no idee
[18:32:30] -!- adb [[email protected]] has joined #linuxcnc
[18:35:50] <cncinator> -.-
[18:38:28] -!- Nick001-Shop has quit [Ping timeout: 245 seconds]
[18:39:46] <cncinator> jesus why
[18:39:51] -!- Nick001-Shop [[email protected]] has joined #linuxcnc
[18:39:59] <cncinator> the complete tooltable
[18:40:00] <cncinator> wasted
[18:41:28] <IchGuckLive> did you use G41/42 40
[18:41:37] <cncinator> no
[18:41:54] <cncinator> just g95, g43
[18:41:57] <IchGuckLive> did you reset all cycles
[18:42:30] <IchGuckLive> G49 resets g43
[18:44:10] <cncinator> yes, evrything reseted, restarted, referenced - 0,25 off
[18:44:34] <IchGuckLive> then your switch fails
[18:44:55] <cncinator> i didnt used it between the 2 programms
[18:45:02] <cpresser_> or you lost steps
[18:45:28] <cpresser_> mechanical failure is also possible
[18:45:33] <cncinator> even after referencing?
[18:47:01] <cpresser_> sure. just imaginge: 1. reference 2. machine stuff and lose steps 3. reference again 4. error
[18:47:17] <IchGuckLive> for checking use a dial on Z Max position
[18:47:26] -!- nunya has quit [Quit: Leaving]
[18:47:32] <IchGuckLive> go fo No part
[18:47:36] <IchGuckLive> and max speed
[18:47:50] <IchGuckLive> go then G53 to the dial and see
[18:48:50] <IchGuckLive> cncinator: your Z ref is at max Z HOME is ?
[18:49:13] <cncinator> no its the x axis
[18:49:20] <cncinator> with seperate home and limit switch
[18:49:43] <IchGuckLive> Diameter or radius mode
[18:49:49] <cncinator> g7 diameter
[18:50:16] <IchGuckLive> the ref switch on X is max positive
[18:50:27] <IchGuckLive> or even close
[18:50:28] -!- Michael___ [[email protected]] has parted #linuxcnc
[18:51:06] <cncinator> ref is at 35
[18:51:11] <cncinator> soft max 55
[18:51:18] <cncinator> switch min 0
[18:51:49] <IchGuckLive> the Ref switch position is at Home_offset what is this value in the ini for X
[18:52:29] <cncinator> the same a reference
[18:52:32] <IchGuckLive> do you got a dial
[18:52:35] <cncinator> yes
[18:52:40] <cncinator> allready testing movement
[18:53:21] <IchGuckLive> with the G53 value
[18:53:31] <cncinator> it references to 0 and gives no misspositioning with g0 in 0,5mm steps
[18:53:32] <IchGuckLive> no tool
[18:54:25] <andypugh> Chipped tool? Radius compensation?
[18:54:27] <IchGuckLive> i woudt go to far X plus end and set the dial on a G53 number there to Zero
[18:55:04] <IchGuckLive> lets say G53 X50
[18:55:25] <IchGuckLive> dial is zero there now run the programm 2 times no tool
[18:55:59] <IchGuckLive> and get MDI G53 G1 X50 Fxxx
[18:56:11] <IchGuckLive> and see if it is still there
[18:56:20] <IchGuckLive> then your mashine is ok
[18:57:54] <cncinator> it matches with reference position
[18:58:31] <IchGuckLive> reference both way or only one
[18:58:55] <IchGuckLive> i woudt not check on reference
[18:59:04] <IchGuckLive> toolpath
[18:59:10] <JT-Shop> crap I need to cut something on the plasma and the computer won't come on...
[18:59:21] <IchGuckLive> BAD
[18:59:31] <IchGuckLive> JT-Shop: go for manuell
[19:00:55] <IchGuckLive> JT-Shop: im to far away to give you a hand 7-8k/Km
[19:01:02] <IchGuckLive> B) O.O
[19:02:54] -!- cncinator has quit [Quit: Verlassend]
[19:03:07] <JT-Shop> yea, the fan on the power supply works... so I'll work my way from there
[19:03:32] <IchGuckLive> no piep is bad
[19:03:45] <IchGuckLive> how many water it took last plasma cut
[19:03:47] <JT-Shop> no peep at all
[19:04:27] <IchGuckLive> RAM remove
[19:04:42] <IchGuckLive> and the Graphics if not onboard
[19:05:06] <IchGuckLive> cr2032 out
[19:05:21] <JT-Shop> 525 mother board
[19:05:32] <IchGuckLive> BAD
[19:06:39] <IchGuckLive> to hot after shutdown
[19:14:00] <JT-Shop> hmmm
[19:14:12] <IchGuckLive> seams only underpowering
[19:14:37] <IchGuckLive> there is noone having trouble with this board
[19:14:48] <IchGuckLive> on boot failue
[19:16:31] <JT-Shop> I have 5v and 12v on the peripheral connector
[19:16:55] <JT-Shop> I think I have another motherboard with a dead lan
[19:17:54] <IchGuckLive> im off
[19:17:57] -!- IchGuckLive has quit [Quit: ChatZilla 0.9.87 [Firefox 18.0/20130108033621]]
[19:18:12] <L84Supper> FinboySlick: the plan is to be able to cheaply print devices like that real soon using a 3D printer
[19:18:28] -!- Nick001-Shop has quit [Ping timeout: 245 seconds]
[19:19:17] -!- sumpfralle has quit [Ping timeout: 256 seconds]
[19:20:14] <L84Supper> http://www.picop.org/
[19:20:19] -!- jfire has quit [Quit: Leaving.]
[19:21:46] -!- Nick001-Shop [[email protected]] has joined #linuxcnc
[19:23:28] <fragalot> not sure which part of that you think you could print cheaply
[19:23:51] <fragalot> it barely has any structural plastic parts in it as far as I can tell
[19:24:08] <L84Supper> the mems mirror
[19:24:51] <L84Supper> I hope you don't think I'm talking about using a reprap
[19:25:09] <fragalot> lol no, I have one and it's good for printing quick rough things but that's about it
[19:25:24] <fragalot> never heard of anyone printing mirrors though
[19:25:52] <L84Supper> just starting to print devices
[19:26:02] <fragalot> Neat :)
[19:26:16] <L84Supper> multiple materials with submicron features
[19:30:28] <L84Supper> http://tinyurl.com/chevv7n looks like s good deal, the retrofit probably cost more than they are asking
[19:32:22] -!- sumpfralle [[email protected]] has joined #linuxcnc
[19:32:37] -!- tmcw has quit [Read error: Connection reset by peer]
[19:34:36] * fragalot snipes
[19:36:15] -!- tmcw_ has quit [Read error: Connection reset by peer]
[19:42:02] -!- adb has quit [Remote host closed the connection]
[19:52:29] <JT-Shop> as soon as I get those parts cut out I'm ordering a couple of those motherboards that pcw_home found when I can find the number
[19:55:50] <FinboySlick> L84Supper: What an adorable big beast.
[19:56:00] <tjb1> I just got an email from Hardinge, they want me to tour the plant. All traveling expenses paid :)
[19:56:11] -!- R2E4_ [[email protected]] has joined #linuxcnc
[19:57:43] <R2E4_> Anyone see a problem if I provide a 20Amp 220Volt circuit for the electronics of a bridgeport and a seperate 10amp 220volt circuit for the spindle?
[19:57:54] <R2E4_> 12 guage both?
[19:59:46] <FinboySlick> tjb1: You think you can put a GX 250 on your expense report? ;)
[20:00:00] -!- PCW [[email protected]] has joined #linuxcnc
[20:00:13] <tjb1> FinboySlick: Ha I don't think so
[20:00:37] <FinboySlick> tjb1: You should... You never know when a joke gets taken seriously.
[20:02:57] <JT-Shop> tjb1: nice!
[20:04:34] <tjb1> FinboySlick: I'm trying to get a job there!
[20:05:05] <tjb1> I might be able to work at Prototrak too but that would require going to California
[20:05:12] <FinboySlick> tjb1: Even better, make it part of your sign-up bonus.
[20:05:27] <tjb1> FinboySlick: They pay for the moving trucks and first month rent ;)
[20:05:58] <FinboySlick> tjb1: Well, they can put it on the truck!
[20:06:05] <FinboySlick> Think positive, dude.
[20:06:13] <tjb1> I don't like motorcycles
[20:06:15] <tjb1> Deadly things
[20:06:42] <tjb1> Well not the motorcycles, just all the idiots you have to drive around
[20:07:31] -!- V0idExp [[email protected]] has joined #linuxcnc
[20:11:22] -!- skunkworks has quit [Read error: Connection reset by peer]
[20:16:14] -!- mhaberler [[email protected]] has joined #linuxcnc
[20:19:03] <L84Supper> R2E4_: no problem with that
[20:19:42] <L84Supper> 12ga is rated for 20A with 3 or less conductors in a conduit
[20:25:05] -!- mhaberler has quit [Quit: mhaberler]
[20:25:22] -!- mhaberler [[email protected]] has joined #linuxcnc
[20:28:31] <R2E4_> thats what I thought. Thanks.
[20:30:52] <L84Supper> http://tinyurl.com/d7g4c4f here's a monster bargain
[20:31:31] <FinboySlick> L84Supper: Doesn't look rigid enough, you'd probably need to brace it ;)
[20:32:01] <L84Supper> nothing a trip to the hardware store and some 2x4's can't fix
[20:32:13] <FinboySlick> Hehe, what a beast.
[20:33:25] -!- tjtr33 [[email protected]] has joined #linuxcnc
[20:33:39] <L84Supper> http://www.ebay.com/itm/SUNDSTRAND-Mill-/330888453458?pt=LH_DefaultDomain_0&hash=item4d0a7d1d52 even bigger
[20:34:11] -!- ktchk [[email protected]] has joined #linuxcnc
[20:34:46] <FinboySlick> Probably needs a bit more TLC though.
[20:37:03] <tjtr33> recent user list emails about linuxcncrsh got me to install man2html & swish++,
[20:37:03] <tjtr33> now i have bookmarks for items like
http://localhost/cgi-bin/man/man2html?query=linuxcncrsh
[20:37:18] <tjtr33> no more extra terminals
[20:38:32] <cradek> you've replaced the occasional invocation of nroff with a web server that runs all the time? is there an sql database for some reason too?
[20:38:41] <cradek> (sorry)
[20:39:30] <JT-Shop> I just had a file that had an error while in a G92 offset. The dro reads -1.23 for X but G0 X0 won't make it go to the G92 X0 point
[20:40:56] -!- ktchk [[email protected]] has parted #linuxcnc
[20:41:00] -!- cevad [[email protected]] has joined #linuxcnc
[20:41:00] <tjb1> What is the dress code for a plant tour?
[20:42:09] -!- L84Supper has quit [Quit: <puff of smoke>]
[20:45:03] -!- JT-Shop-2 [[email protected]] has joined #linuxcnc
[20:45:03] -!- JT-Shop has quit [Read error: Connection reset by peer]
[20:45:19] -!- Nick001-Shop_ [[email protected]] has joined #linuxcnc
[20:45:22] -!- skunkworks [skunkworks!~chatzilla@str-broadband-ccmts-ws-26.dsl.airstreamcomm.net] has joined #linuxcnc
[20:45:33] <r00t4rd3d> toga
[20:46:51] -!- Nick001-Shop has quit [Ping timeout: 260 seconds]
[20:47:01] Nick001-Shop_ is now known as Nick001-Shop
[20:47:54] <tjtr33> cradek, i had to look up the relationship of nroff to man to understanf that comment was for me :), i dont see a big diff in load or memory use.
[20:49:28] <tjtr33> cradek, i think it only runs while i open the port and have my browser running ( ffox 19.0)
[20:50:47] -!- stsydow has quit [Remote host closed the connection]
[20:56:47] <r00t4rd3d> dont share a ice cream cone with this chick
http://imgur.com/a/zpe4a
[20:57:08] -!- L84Supper [L84Supper!~Larch@unaffiliated/l84supper] has joined #linuxcnc
[21:01:03] -!- ravenlock [ravenlock!~ravenlock@enlightenment/developer/ravenlock] has parted #linuxcnc
[21:02:41] -!- ler_hydra [[email protected]] has joined #linuxcnc
[21:05:14] <L84Supper> http://yro.slashdot.org/story/13/03/21/1420223/digging-into-the-legal-status-of-3-d-printed-guns all these distractions about 3D printing guns when the real problem is printing bullets
[21:05:38] <cradek> bullets are trivially easy to cast
[21:05:52] <TekniQue> yeah
[21:06:00] <TekniQue> lead is the easiest metal in the world to cast
[21:06:14] <L84Supper> not technical problem, social problem
[21:06:15] <cradek> making new primers, not so easy
[21:06:46] <cradek> if crazy irrational fear of gun-taking-away causes advances in 3d printing, yay, I guess
[21:07:05] -!- gasbakid has quit [Max SendQ exceeded]
[21:07:09] <cradek> we don't get much new technology (for the people) from our wars anymore
[21:08:10] -!- skorasaurus has quit [Quit: left the building.]
[21:09:06] <r00t4rd3d> http://chrome.com/maze/
[21:09:08] <r00t4rd3d> that is cool
[21:11:22] <cradek> it's spring!
[21:11:45] JT-Shop-2 is now known as JT-Shop
[21:12:23] <JT-Shop> now I'm really confused the part came out big on X but spot on in Y
[21:15:36] <tjb1> Late to the party r00t4rd3d
[21:16:30] -!- ler_hydra has quit [Remote host closed the connection]
[21:22:32] <JT-Shop> second try came out perfect
[21:25:16] <r00t4rd3d> tjb1, i should be able to cut aluminum decently now
[21:25:31] <tjb1> ok
[21:25:43] <r00t4rd3d> i redid my z axis with linear carriages
[21:27:14] <r00t4rd3d> i need to bumb my x axis screw up to 1/2 from 3/8 still though
[21:29:02] -!- erictheise has quit [Quit: erictheise]
[21:37:35] -!- gasbakid has quit [Read error: Connection reset by peer]
[21:47:31] -!- Guest40951 has quit [Quit: bye]
[21:47:40] <tjb1> up from 1/2 to 3/8?
[21:47:52] <tjb1> oh nevermind
[21:47:56] <tjb1> to 1/2 from 3/8
[21:48:02] -!- blommer [blommer!~blommer@2605:6400:2:fed5:22:0:d3c0:ed9b] has joined #linuxcnc
[21:56:15] -!- mhaberler has quit [Quit: mhaberler]
[21:58:54] <tjb1> JT-Shop: Plasma problem?
[21:58:57] -!- V0idExp has quit [Quit: Leaving.]
[21:59:46] <JT-Shop> some kind of problem... I got an error then I fixed that and ran the part and the X was scaled up a tad somehow
[21:59:51] <JT-Shop> weird
[22:01:03] <tjb1> linux error or cutter?
[22:02:51] <JT-Shop> linux
[22:03:21] <JT-Shop> I flipped the sheet over and ran the same file again and perfect
[22:04:47] -!- syyl_tb [[email protected]] has joined #linuxcnc
[22:05:25] <DJ9DJ> gn8
[22:06:32] -!- DJ9DJ has quit [Quit: bye]
[22:08:14] -!- Cylly [[email protected]] has joined #linuxcnc
[22:09:59] -!- xxoxx [xxoxx!~xxoxx@tor/regular/xxoxx] has joined #linuxcnc
[22:10:43] -!- Loetmichel has quit [Ping timeout: 264 seconds]
[22:15:29] -!- syyl_tb- [[email protected]] has joined #linuxcnc
[22:18:46] -!- syyl_tb has quit [Ping timeout: 240 seconds]
[22:28:40] <r00t4rd3d> gn8de
[22:30:24] -!- chillly has quit [Quit: Leaving]
[22:34:21] -!- r00t4rd3d has quit [Read error: Connection reset by peer]
[22:34:47] -!- r00t4rd3d [r00t4rd3d!~r00t4rd3d@unaffiliated/r00t4rd3d] has joined #linuxcnc
[22:35:18] -!- Thetawaves_ [[email protected]] has joined #linuxcnc
[22:44:51] -!- gmag [[email protected]] has joined #linuxcnc
[22:45:01] <gmag> hi
[22:45:22] <zenek_> hi
[22:45:33] <gmag> :)
[22:46:25] <gmag> I wonder how much a cork extrusion machine would cost... any idea? (certainly offtopic)
[22:48:12] <gmag> if I can't get an answer in this channel, I won't get it anywhere in freenode :) I had to try here
[22:48:29] <gmag> you guys rock in machinery
[22:49:16] -!- syyl_tb- has quit [Ping timeout: 240 seconds]
[22:50:53] <L84Supper> extruder made of cork or extrudes cork?
[22:51:16] -!- FinboySlick1 [[email protected]] has joined #linuxcnc
[22:51:21] -!- FinboySlick1 has quit [Client Quit]
[22:52:14] -!- alpha1125 has quit [Read error: Connection reset by peer]
[22:52:15] <L84Supper> gmag: synthetic cork?
[22:56:26] -!- fomox has quit [Remote host closed the connection]
[22:57:02] <r00t4rd3d> #reprap might know
[22:58:20] -!- alpha1125 [[email protected]] has joined #linuxcnc
[23:00:16] <gmag> L84Supper, machine that extrudes cork. Natural cork
[23:00:44] -!- adb [[email protected]] has joined #linuxcnc
[23:01:43] <gmag> L84Supper, but if you know of any reference please share. I just want to get an idea of how much I would pay for one of those machines
[23:01:46] <Tom_itx> you sure it's extruded?
[23:01:54] <Tom_itx> kinda have my doubts
[23:01:59] <gmag> Tom_itx, what do you mean
[23:02:08] <gmag> the cork is extruded
[23:03:05] <gmag> to make stoppers are made by extrusion
[23:03:19] <cpresser_> i dont understand how it would work. cork itself has no cohesion
[23:03:52] <gmag> cpresser_, they mix other stuff
[23:04:12] <gmag> stoppers are not made of pure cork
[23:04:34] <gmag> there's silicon and paraffin
[23:05:21] <gmag> cork is baked, mixed with these other "ingredients" and then extruded
[23:05:24] <cpresser_> are you sure its free-form extruded? i would rather guess it gets molded
[23:06:40] -!- mhaberler [[email protected]] has joined #linuxcnc
[23:09:28] -!- FinboySlick has quit [Quit: Leaving.]
[23:09:42] <gmag> cpresser_, that stopper you're thinking about is a very expensive one
[23:09:51] <gmag> you dont see it often
[23:10:02] <gmag> a pure cork stopper is vary rare
[23:10:19] <cpresser_> pictures?
[23:10:28] <gmag> http://www.youtube.com/watch?v=ETsl-TiLowI
[23:10:47] <gmag> this video shows those expensive stoppers being made
[23:11:47] <cpresser_> i dont think so. they show cork for wine bottles
[23:12:29] <gmag> http://www.cork.pt/agglomerated-cork-stoppers.html
[23:12:40] <gmag> a reference is made to cork extrusion there
[23:12:44] -!- FinboySlick [[email protected]] has joined #linuxcnc
[23:14:20] -!- tmcw has quit [Remote host closed the connection]
[23:14:25] <cpresser_> yes. LINEAR extrusion
[23:14:41] <cpresser_> for cylindrical shapes
[23:14:59] <gmag> exacly
[23:15:38] <gmag> any idea of the price of one of these machines? Probably the price would be the same of a plastic extruder (??)
[23:16:19] <cpresser_> i dont think you can buy them off the shelf
[23:16:39] <Tom_itx> JT-Shop could build you one
[23:16:47] <cpresser_> most likely they are custom made.
[23:17:19] <gmag> JT-Shop? :)
[23:17:22] <gmag> what's that?
[23:17:35] <gmag> jthornton shop?
[23:18:52] <gmag> cpresser_, you're probably right
[23:19:00] -!- AR_ [[email protected]] has joined #linuxcnc
[23:19:46] <gmag> cpresser_, I'd like to make one of these machines. But I dont have expertise to do it.
[23:20:31] <gmag> I was able to make a desktop CNC and I would say 90% of it I got from LinuxCNC :)
[23:20:34] <L84Supper> a plastic extruder for something 20mm dia would sell for >$125K that extrudes ~80Kg/hour
[23:20:43] <gmag> considering the software 90% of the cnc of course...
[23:21:07] <cpresser_> since it wont require heating (at least i guess so), you could use a kitchen extuder (for meat grinding or sausages)
[23:21:20] -!- AR__ has quit [Read error: Operation timed out]
[23:21:54] <JT-Shop> Tom_itx: what?
[23:22:00] <cpresser_> do you want to tinker with it, or go big?
[23:22:02] -!- zzolo has quit [Quit: zzolo]
[23:22:17] -!- Thetawaves_ has quit [Quit: This computer has gone to sleep]
[23:22:20] <Tom_itx> JT-Shop, i told him you'd volunteer to make him a cork extruder :D
[23:22:51] <L84Supper> where was that link to the big dc motor and gearbox?
[23:23:36] <L84Supper> http://racine.craigslist.org/bfs/3693598309.html that will save you ~$15K
[23:24:05] <gmag> L84Supper, registered, good to know that
[23:24:13] <JT-Shop> for a wine bottle?
[23:24:20] <Tom_itx> apparently
[23:25:00] <gmag> JT-Shop, yeah
[23:25:45] <gmag> I'm seriously thinknig in making one or ask someone to make one
[23:25:47] <L84Supper> http://www.ebay.com/itm/4-5-PLASTIC-EXTRUDER-by-STERLING-/300868830549?pt=LH_DefaultDomain_0&hash=item460d2e0555
[23:25:56] <L84Supper> 4.5" PLASTIC EXTRUDER
[23:26:35] <L84Supper> 150 HP DC MOTOR, SCR DRIVE REDUCER RATIO: 14:1 SCREW RPM: 140
[23:26:50] <L84Supper> RUNNING HDPE: 700 LBS/HR
[23:27:03] <L84Supper> how many corks do you need a hour?
[23:27:36] <L84Supper> a plastic extruder won't work with actual cork from a tree
[23:28:19] <L84Supper> but this gives you an idea of the size motor and screw you'll be looking at to move material
[23:29:18] -!- tomp3 [[email protected]] has joined #linuxcnc
[23:29:24] <gmag> L84Supper, 2 meters per hour should be ok
[23:29:56] -!- tomp3 has quit [Client Quit]
[23:30:09] <L84Supper> somebody must make a barrel screw design for cork composite
[23:30:41] <L84Supper> in fact it might not even be a screw, more of a piston and cylinder
[23:32:19] <cpresser_> gmag:
http://fehrmann.de/bilder/fleischereimaschinen/fleischereimaschinen-wurstmaschine.jpg
[23:32:43] <cpresser_> those are used for sausages; a few of them use a piston
[23:32:55] <cpresser_> i guess those are less then 10k$
[23:33:56] <gmag> cpresser_, quite interesting!!
[23:34:08] <L84Supper> http://www.ebay.com/itm/TSM-The-Sausage-Maker-53001-30-lb-Sausage-Stuffer-/230944906460?pt=LH_DefaultDomain_0&hash=item35c5639cdc
[23:34:16] <L84Supper> US $1,200.00
[23:36:29] <cpresser_> but be carefull, some of them use a rotary-vane pump for transport
[23:36:39] <gmag> yeah, that's what I call thinking out of the box. My mind was focused on cork only... silly of me
[23:36:52] <cpresser_> i dont think that those designs can deliver enought pressure
[23:37:13] <Tom_itx> me either
[23:37:45] <L84Supper> the patent drawings on cork extruders just look more heavy duty
[23:38:06] <gmag> L84Supper, patent drwaings? Where
[23:38:21] <L84Supper> look up cork extruders
[23:38:26] <gmag> yup
[23:38:28] <gmag> found it
[23:41:34] <JT-Shop> PCW: are you around?
[23:41:53] <gmag> wow lot of information, thanks a lot. I have a lot to read before
[23:42:12] <gmag> before deciding what to do
[23:42:29] <JT-Shop> anyone remember the model number of that motherboard Peter tested lately
[23:44:42] <JT-Shop> I think it is this ASUS E45M1-M PRO
[23:45:30] <Tom_itx> <pcw_home> ASUS E45M1-M PRO is my current favorite (no fan but runs circles around Atom MBs)
[23:45:47] <JT-Shop> you are the search guru Tom
[23:45:50] <JT-Shop> thanks
[23:46:33] <PCW> Yes ASUS E45M1-M PRO
[23:46:45] <Tom_itx> and confirmed :D
[23:46:51] <JT-Shop> thanks
[23:47:35] <PCW> needs C6 state and cool&quiet turned off in BIOS
[23:47:53] <JT-Shop> thanks
[23:48:29] <Tom_itx> http://www.newegg.com/Product/Product.aspx?Item=N82E16813131875
[23:49:06] -!- servos4ever has quit [Quit: ChatZilla 0.9.85 [SeaMonkey 2.0.11/20101206162726]]
[23:49:27] <JT-Shop> hmm I need a bigger case for that puppy
[23:51:15] <Tom_itx> parport must be a plug instead of header
[23:52:43] <JT-Shop> http://www.newegg.com/Product/Product.aspx?Item=N82E16811154085
[23:52:45] <gmag> dont want to bother much with this subject, but I think you would like to see this:
http://www.youtube.com/watch?v=GG6pIXGPj1Q
[23:52:52] <gmag> I found it interesting
[23:55:02] -!- stsydow has quit [Remote host closed the connection]
[23:59:08] <tjtr33> it has 2 pci and pport is on hdr
