Back
[00:01:59] <andypugh> Jymmmm: You might get to really like the iMac keyboard. A friend was desperate to find a clicky keyboard until I persuaded him to try the Apple ones.
[00:02:29] <Jymmmm> andypugh: I've had a wired Apple kybd for years
[00:02:55] <andypugh> The aluminium "chicklet" one?
[00:02:59] -!- Valen has quit [Quit: Leaving.]
[00:03:12] <Jymmmm> andypugh: yep
[00:03:34] <andypugh> Much nicer keyboards than they look, I think?
[00:04:09] <Jymmmm> VERY nice actually
[00:04:25] <andypugh> Or maybe the other way round. They _look_ like they should be all-form and no function.
[00:06:10] <Jymmmm> andypugh: The appe kybd was a very easy transition from model m for me
[00:07:33] <andypugh> Anyway, enough off-topic chat, time to sleep.
[00:07:36] <andypugh> Night all.
[00:07:42] -!- andypugh has quit [Quit: andypugh]
[00:07:51] <JT-Shop> good night Irene
[00:13:14] -!- dgarr [[email protected]] has joined #linuxcnc
[00:14:15] <Tom_itx> good night Gracie
[00:20:36] <Nick001> <PCW> do you have a list of stepgen stuff to steal -) and is that the only 2 lines to modifyfor 00 and 01?
[00:21:59] -!- paideia [[email protected]] has joined #linuxcnc
[00:22:03] -!- mhel [[email protected]] has joined #linuxcnc
[00:22:47] -!- mhel has quit [Client Quit]
[00:22:47] <PCW> you can copy/paste them from hm2-stepper.hal and the associated .ini file
[00:24:13] <Nick001> got that - I'll have to figure out which lines to coppy - tommorrow at the shop
[00:24:31] <PCW> # timing parameters
[00:24:33] <PCW> setp hm2_[HOSTMOT2](BOARD).0.stepgen.00.dirsetup [AXIS_0]DIRSETUP
[00:24:35] <PCW> setp hm2_[HOSTMOT2](BOARD).0.stepgen.00.dirhold [AXIS_0]DIRHOLD
[00:24:37] <PCW> setp hm2_[HOSTMOT2](BOARD).0.stepgen.00.steplen [AXIS_0]STEPLEN
[00:24:38] <PCW> setp hm2_[HOSTMOT2](BOARD).0.stepgen.00.stepspace [AXIS_0]STEPSPACE
[00:24:40] <PCW> setp hm2_[HOSTMOT2](BOARD).0.stepgen.00.position-scale [AXIS_0]SCALE
[00:24:41] <PCW> setp hm2_[HOSTMOT2](BOARD).0.stepgen.00.maxvel [AXIS_0]STEPGEN_MAX_VEL
[00:24:43] <PCW> setp hm2_[HOSTMOT2](BOARD).0.stepgen.00.maxaccel [AXIS_0]STEPGEN_MAX_ACC
[00:24:45] <PCW> that kind of thing
[00:25:04] <Nick001> and leave the pid stuff alone?
[00:26:10] <PCW> other than the PID output driving the stepgens velocity pin rather than a PWMGen, the PID is unchanged
[00:27:12] <PCW> (well tuning will be different, all FF1 plus a bit of P)
[00:28:53] <PCW> so basically you are making a velocity mode servo with the
[00:28:55] <PCW> PID output controlling a step rate insted of an analog output voltage
[00:30:23] <PCW> also need this of course:
[00:30:24] <PCW> setp hm2_[HOSTMOT2](BOARD).0.stepgen.00.control-type 1
[00:43:10] <PCW> bbml
[00:46:04] <Nick001> ok - thanks - I'll make these changes in the morning when I get to the shop
[00:50:10] Bojangle1 is now known as Bojangles
[00:57:43] -!- Patang has quit [Ping timeout: 252 seconds]
[01:00:09] -!- sumpfralle has quit [Ping timeout: 256 seconds]
[01:14:47] -!- Keknom has quit [Quit: Leaving.]
[01:17:18] -!- Patang [[email protected]] has joined #linuxcnc
[01:20:53] -!- c-bob| [c-bob|[email protected]] has joined #linuxcnc
[01:21:40] -!- c-bob has quit [Ping timeout: 276 seconds]
[01:24:13] -!- gimps has quit [Read error: Connection reset by peer]
[01:24:14] -!- hashfail [hashfail!~noone@unaffiliated/gimps] has joined #linuxcnc
[01:27:11] -!- paideia has quit [Quit: Leaving]
[01:34:23] -!- Jymmmm has quit [Remote host closed the connection]
[01:36:17] -!- jfire has quit [Quit: Leaving.]
[01:41:16] -!- geo01005 [[email protected]] has joined #linuxcnc
[01:42:53] -!- PetefromTn [[email protected]] has joined #linuxcnc
[01:45:57] -!- ktchk [[email protected]] has joined #linuxcnc
[01:46:23] -!- thesisb has quit [Quit: Leaving...]
[01:46:34] -!- hashfail has quit [Remote host closed the connection]
[01:46:57] -!- gimps [gimps!~noone@unaffiliated/gimps] has joined #linuxcnc
[01:51:55] -!- servos4ever has quit [Quit: ChatZilla 0.9.85 [SeaMonkey 2.0.11/20101206162726]]
[01:56:13] -!- velcrow [velcrow!~velcrow@gateway/tor-sasl/velcrow] has joined #linuxcnc
[01:59:59] -!- ughhhhh [[email protected]] has joined #linuxcnc
[02:00:59] <ughhhhh> having some issues on my lathe with threading.... it goes to the initial position and just pauses and the spindle is spinning
[02:01:59] <ughhhhh> i cant see any issues with the program. when i check the spindle-at-speed signal, it is flickering between true and false pretty rapidly. could this be the issue?
[02:02:15] <ughhhhh> i have never tried threading on this lathe before
[02:10:25] -!- hhhh has quit [Ping timeout: 250 seconds]
[02:14:37] <ughhhhh> hmm the spindle-at-speed signal is still flashing true/false, even though i changed the near.0.scale to 4
[02:14:45] -!- Nubins has quit [Ping timeout: 250 seconds]
[02:15:49] -!- Tecan has quit [Ping timeout: 252 seconds]
[02:16:38] <ughhhhh> ok something isnt right
[02:16:59] <skunkworks> ughhhhh: could you post your hal and ini files on pastebin.com
[02:17:29] -!- Tecan [Tecan!~fasdf@unaffiliated/unit41] has joined #linuxcnc
[02:18:55] -!- vladimirek [[email protected]] has joined #linuxcnc
[02:19:02] <ughhhhh> sure give me a sec
[02:19:21] -!- PetefromTn [[email protected]] has parted #linuxcnc
[02:21:41] -!- Nubins has quit [Ping timeout: 250 seconds]
[02:22:04] <ughhhhh> skunkworks:
http://pastebin.com/J01HAutA
[02:23:01] <skunkworks> cool - mesa
[02:24:02] <ughhhhh> looks like maybe my encoder is not working properly
[02:24:27] <ughhhhh> i'm watching the counts in hal meter and it's jumping around even when spinning my hand
[02:24:31] <ughhhhh> by hand*
[02:24:52] <ughhhhh> sorry, i know it isnt very organized
[02:25:02] <Tom_itx> or noisy wiring?
[02:25:14] <Tom_itx> is the signal wire shielded?
[02:25:18] <ughhhhh> could be but i doubt it
[02:25:52] <pcw_home> wrong encoder mode? (TTL vs Differential)
[02:25:55] <ughhhhh> it's a hollow bore encoder. you have to align the disk\
[02:26:04] <skunkworks> wow - that is quite the hal file..
[02:26:35] <ughhhhh> trainwreck, you can say it.
[02:27:00] <ughhhhh> pcw_home: possible, but i'm pretty sure it counted fine before
[02:27:15] <pcw_home> I would look at the A,B signals with HALScope as the spindle turns slowly
[02:27:28] <ughhhhh> my guess is the disk is contaminated or out of calibration
[02:27:59] <ughhhhh> would this cause it not to cut threads?
[02:28:17] <ughhhhh> it basically just pauses at the beginning of the cut
[02:29:10] <pcw_home> you need spindle at speed and encoder index to work to start the thread
[02:29:55] <ughhhhh> yea spindle at speed just flickers true to false
[02:30:55] -!- capricorn_1 [[email protected]] has joined #linuxcnc
[02:32:02] <ughhhhh> what's the best way to see if it's reading the index?
[02:32:28] -!- fiesh has quit [Ping timeout: 246 seconds]
[02:33:46] <ughhhhh> weird, it seems to count ok in one direction but not very well at all in the other
[02:34:36] -!- Keknom [[email protected]] has joined #linuxcnc
[02:35:14] -!- fiesh [[email protected]] has joined #linuxcnc
[02:35:25] <pcw_home> sounds like the quadrature phasing is wrong
[02:35:48] <pcw_home> this can be a detector/disk alignment issue
[02:36:29] <pcw_home> and some older encoders have A/B sensitivity pots
[02:37:02] <ughhhhh> its fairly new
[02:38:44] <pcw_home> was it disassembed?
[02:39:37] <pcw_home> Anyway I would 'scope A,B and also just check their DC levels
[02:41:24] <ughhhhh> it wasnt dissasembled anymore than it comes from the factory... which is a floating disk in a plastic housing that you have to space correctly when you put it on the shaft
[02:52:01] -!- BJfreeman has quit [Ping timeout: 276 seconds]
[02:54:41] <ughhhhh> well it's saying spindle-at-speed is true now that i adjusted the disk
[02:56:10] <ughhhhh> well that was it.
[02:56:17] <ughhhhh> it's threading now, thanks guys
[02:57:27] -!- vladimirek has quit [Remote host closed the connection]
[02:58:01] -!- geo01005 has quit [Ping timeout: 246 seconds]
[03:00:31] <skunkworks> yay
[03:06:20] -!- skunkworks- [skunkworks-!~yaaic@str-broadband-ccmts-ws-26.dsl.airstreamcomm.net] has joined #linuxcnc
[03:18:08] -!- FinboySlick has quit [Quit: Leaving.]
[03:22:55] -!- ktchk has quit [Ping timeout: 252 seconds]
[03:34:07] -!- zzolo has quit [Ping timeout: 264 seconds]
[03:41:26] -!- jfire has quit [Quit: Leaving.]
[03:43:29] -!- tjtr33 [[email protected]] has joined #linuxcnc
[03:43:32] -!- geo01005 [[email protected]] has joined #linuxcnc
[03:43:49] -!- velcrow has quit [Ping timeout: 240 seconds]
[03:44:40] -!- skunkworks- has quit [Ping timeout: 276 seconds]
[03:56:49] -!- geo01005 has quit [Ping timeout: 246 seconds]
[03:59:36] -!- RagingComputer has quit [Ping timeout: 256 seconds]
[04:04:49] -!- RagingComputer [[email protected]] has joined #linuxcnc
[04:05:29] -!- thesisb has quit [Quit: Leaving...]
[04:08:45] |1li is now known as racetaman
[04:11:47] -!- Jymmm [Jymmm!~jymmm@unaffiliated/jymmm] has joined #linuxcnc
[04:24:24] racetaman is now known as |1li
[04:33:29] -!- capricorn_1 has quit [Quit: Konversation terminated!]
[04:42:58] -!- Tecan has quit [Quit: Live Long And Phosphor!]
[04:43:03] -!- jfrmilner has quit [Ping timeout: 260 seconds]
[04:43:59] -!- jfrmilner [[email protected]] has joined #linuxcnc
[04:44:55] -!- zzolo has quit [Ping timeout: 264 seconds]
[04:55:52] -!- ve7it has quit [Remote host closed the connection]
[04:59:02] -!- Keknom has quit [Quit: Leaving.]
[05:00:24] -!- Fox_Muldr has quit [Read error: Operation timed out]
[05:05:10] -!- Fox_Muldr [[email protected]] has joined #linuxcnc
[05:08:40] -!- dgarr has quit [Quit: Leaving.]
[05:15:39] -!- fragalot has quit [Changing host]
[05:15:39] -!- fragalot [fragalot!~thomas@gentoo/user/FamousToaster] has joined #linuxcnc
[05:33:23] -!- pingufan [[email protected]] has joined #linuxcnc
[05:37:41] -!- dhoovie [[email protected]] has joined #linuxcnc
[05:46:22] -!- dhoovie has quit [Ping timeout: 246 seconds]
[05:46:41] -!- krusty_ar has quit [Ping timeout: 248 seconds]
[05:49:40] Cylly is now known as Loetmichel
[05:49:52] <Loetmichel> mornin'
[05:57:31] -!- bedah has quit [Quit: Ex-Chat]
[05:58:34] -!- Laremere has quit [Ping timeout: 276 seconds]
[06:06:25] -!- tjtr33 has quit [Quit: Leaving]
[06:14:58] -!- Gyro_ has quit [Quit: Page closed]
[06:21:05] -!- Andy1978 [[email protected]] has joined #linuxcnc
[06:29:57] -!- KimK_2 has quit [Remote host closed the connection]
[06:34:12] -!- KimK_2 [[email protected]] has joined #linuxcnc
[06:35:13] -!- pingufan has quit [Quit: Konversation terminated!]
[06:39:50] -!- dhoovie [[email protected]] has joined #linuxcnc
[06:39:52] -!- KimK_2 has quit [Remote host closed the connection]
[06:40:08] -!- psha[work] [psha[work][email protected]] has joined #linuxcnc
[06:42:30] -!- Valen [[email protected]] has joined #linuxcnc
[06:51:21] -!- mhaberler [[email protected]] has joined #linuxcnc
[06:57:02] -!- Jymmmm [Jymmmm!~jymmm@unaffiliated/jymmm] has joined #linuxcnc
[06:57:13] -!- Jymmmm has quit [Remote host closed the connection]
[06:57:16] -!- DJ9DJ [DJ9DJ!~Deejay@unaffiliated/dj9dj] has joined #linuxcnc
[06:57:29] -!- Jymmmm [Jymmmm!~jymmm@unaffiliated/jymmm] has joined #linuxcnc
[06:57:49] <DJ9DJ> moin
[06:57:54] -!- Jymmm has quit [Remote host closed the connection]
[07:03:15] -!- asdfasd [[email protected]] has joined #linuxcnc
[07:04:54] -!- stsydow has quit [Remote host closed the connection]
[07:05:56] -!- Jymmmm has quit [Remote host closed the connection]
[07:07:50] -!- Jymmm [Jymmm!~jymmm@unaffiliated/jymmm] has joined #linuxcnc
[07:07:54] -!- Tecan [Tecan!~fasdf@unaffiliated/unit41] has joined #linuxcnc
[07:07:55] -!- archivist_herron has quit [Ping timeout: 246 seconds]
[07:14:39] -!- arekm has quit [Quit: reboot to new kernel]
[07:17:54] -!- ler_hydra [[email protected]] has joined #linuxcnc
[07:18:43] -!- arekm [arekm!~arekm@pld-linux/arekm] has joined #linuxcnc
[07:20:38] -!- thesisb has quit [Quit: Leaving...]
[07:20:49] -!- archivist_herron [[email protected]] has joined #linuxcnc
[07:23:30] -!- rob_h [[email protected]] has joined #linuxcnc
[07:27:19] <Tecan> http://i.imgur.com/E368WTW.jpg
[07:27:37] <Andy1978> Tecan: Laser?
[07:27:53] <Tecan> ya if you look at the bottom i was going too slow and she sliced through
[07:28:08] <Andy1978> n1
[07:28:42] -!- Simooon [[email protected]] has joined #linuxcnc
[07:30:15] -!- KimK_2 [[email protected]] has joined #linuxcnc
[07:45:31] -!- stsydow has quit [Ping timeout: 264 seconds]
[08:02:37] -!- _BJfreeman [[email protected]] has joined #linuxcnc
[08:06:57] -!- _BJfreeman has quit [Ping timeout: 252 seconds]
[08:10:10] -!- _BJfreeman [[email protected]] has joined #linuxcnc
[08:11:24] -!- _BJfreeman has quit [Client Quit]
[08:12:15] -!- Degot [[email protected]] has joined #linuxcnc
[08:13:19] |1li is now known as |1li_-_-_away
[08:13:22] -!- _BJfreeman [[email protected]] has joined #linuxcnc
[08:16:45] _BJfreeman is now known as BJfreeman
[08:22:31] |1li_-_-_away is now known as ||
[08:22:47] || is now known as |||
[08:23:00] ||| is now known as _||_
[08:31:34] -!- BJfreeman has quit [Ping timeout: 246 seconds]
[08:31:43] -!- _BJfreeman [[email protected]] has joined #linuxcnc
[08:33:13] _BJfreeman is now known as BJfreeman
[08:42:50] -!- sumpfralle [[email protected]] has joined #linuxcnc
[08:53:20] <Degot> Hi, Mighty ALL. Sorry for offtopic. In KUKA robots (KR 180 2900 prime), How do they transfer rotation of 3 Servos to the head ? There is not enough space for that.
[08:59:32] <Andy1978> not enough space?
[09:00:46] -!- fischli [[email protected]] has joined #linuxcnc
[09:01:34] <DJ9DJ> oh. hi Andy1978
[09:02:10] * DJ9DJ has a deja-vu ;)
[09:02:35] -!- adb has quit [Read error: Operation timed out]
[09:02:45] <Andy1978> :-D
[09:29:00] -!- ler_hydra has quit [Remote host closed the connection]
[09:37:13] -!- ssi has quit [Ping timeout: 245 seconds]
[09:49:16] -!- mhaberler has quit [Quit: mhaberler]
[09:50:43] -!- BJfreeman has quit [Quit: had a good time]
[10:05:15] -!- ssi [[email protected]] has joined #linuxcnc
[10:06:31] -!- paideia [[email protected]] has joined #linuxcnc
[10:10:59] -!- mhaberler [[email protected]] has joined #linuxcnc
[10:12:04] -!- stsydow has quit [Ping timeout: 276 seconds]
[10:33:53] -!- skunkworks has quit [Ping timeout: 256 seconds]
[10:35:19] -!- largecheesepuff has quit [Ping timeout: 264 seconds]
[10:36:39] <carper64_lb> morning gents
[10:36:58] -!- largecheesepuff [[email protected]] has joined #linuxcnc
[10:42:20] -!- LeelooMinai has quit [Read error: Connection reset by peer]
[10:42:32] -!- LeelooMinai [[email protected]] has joined #linuxcnc
[10:47:17] <jthornton> mornin
[10:49:11] <Andy1978> hey, good mordning
[10:49:15] <Andy1978> äh, morning
[10:49:18] -!- LeelooMinai has quit [Ping timeout: 264 seconds]
[11:01:53] -!- odogono has quit [Ping timeout: 252 seconds]
[11:04:22] -!- stsydow has quit [Ping timeout: 252 seconds]
[11:12:54] -!- sumpfralle has quit [Quit: Leaving.]
[11:41:36] -!- odogono has quit [Read error: Connection reset by peer]
[11:47:20] <carper64_lb> id rather be sorting out my linuxcnc than the task iam on with now setting up my server wth vmware and server 2012
[11:48:47] -!- stsydow has quit [Read error: Connection reset by peer]
[11:50:10] -!- skunkworks [[email protected]] has joined #linuxcnc
[11:54:28] -!- ler_hydra [[email protected]] has joined #linuxcnc
[11:56:43] -!- paideia has quit [Ping timeout: 276 seconds]
[11:58:51] -!- paideia [[email protected]] has joined #linuxcnc
[12:00:10] -!- sumpfralle [[email protected]] has joined #linuxcnc
[12:03:12] -!- mhaberler has quit [Quit: mhaberler]
[12:14:11] -!- paideia has quit [Ping timeout: 256 seconds]
[12:15:57] -!- paideia [[email protected]] has joined #linuxcnc
[12:24:32] -!- Simooon has quit [Quit: Leaving]
[12:24:49] -!- mhaberler [[email protected]] has joined #linuxcnc
[12:25:09] <Loetmichel> *grrr* ... did i mentoin that my boss forgets to think sometimes? two weeks ago we got 15 pelicases and the watercuit foam for it... boss put the foam inside the cases and closes them... now, tow weeks later we wanted to fit the parts inside the cases... ever got a nose full of water, trapped 2 weeks in an airtight casing?
[12:29:12] -!- stsydow has quit [Read error: Connection reset by peer]
[12:32:43] <skunkworks> eww
[12:33:39] -!- dhoovie has quit [Read error: Connection reset by peer]
[12:35:35] -!- stsydow has quit [Read error: Connection reset by peer]
[12:47:03] -!- paideia has quit [Ping timeout: 256 seconds]
[12:47:52] -!- paideia [[email protected]] has joined #linuxcnc
[12:51:36] -!- stsydow has quit [Read error: Connection reset by peer]
[12:58:58] -!- stsydow has quit [Read error: Connection reset by peer]
[13:09:59] -!- ravenlock [ravenlock!~ravenlock@enlightenment/developer/ravenlock] has joined #linuxcnc
[13:19:28] -!- servos4ever [[email protected]] has joined #linuxcnc
[13:19:41] -!- sumpfralle has quit [Read error: Operation timed out]
[13:20:35] -!- FinboySlick [[email protected]] has joined #linuxcnc
[13:21:25] -!- syyl [[email protected]] has joined #linuxcnc
[13:25:43] -!- maximilian_h [[email protected]] has joined #linuxcnc
[13:25:46] -!- maximilian_h [[email protected]] has parted #linuxcnc
[13:29:18] -!- stsydow has quit [Ping timeout: 245 seconds]
[13:33:26] -!- pingufan [[email protected]] has joined #linuxcnc
[13:35:20] -!- b_b has quit [Changing host]
[13:38:57] -!- Jymmm has quit [Remote host closed the connection]
[13:40:40] -!- Mjolinor [Mjolinor!~Mjolinor@cpc1-burn3-0-0-cust572.10-1.cable.virginmedia.com] has joined #linuxcnc
[13:42:30] -!- Jymmm [Jymmm!~jymmm@unaffiliated/jymmm] has joined #linuxcnc
[13:46:55] -!- mhaberler has quit [Quit: mhaberler]
[13:47:42] -!- Andy1978 [[email protected]] has parted #linuxcnc
[13:53:44] -!- gimpswork [gimpswork!~gimps@unaffiliated/gimps] has joined #linuxcnc
[13:56:11] -!- DJ9DJ has quit [Ping timeout: 256 seconds]
[13:56:33] -!- odogono has quit [Read error: Connection reset by peer]
[13:56:44] -!- LeelooMinai [[email protected]] has joined #linuxcnc
[14:07:45] -!- Tecan has quit [Read error: Connection reset by peer]
[14:08:21] -!- Tecan [Tecan!~fasdf@unaffiliated/unit41] has joined #linuxcnc
[14:18:00] -!- _||_ has quit [Read error: Connection reset by peer]
[14:23:45] -!- pingufan has quit [Quit: Konversation terminated!]
[14:30:15] -!- vladimirek [[email protected]] has joined #linuxcnc
[14:33:01] -!- paideia has quit [Ping timeout: 256 seconds]
[14:33:29] -!- paideia [[email protected]] has joined #linuxcnc
[14:34:43] -!- syyl_ws [[email protected]] has joined #linuxcnc
[14:35:44] -!- maximilian_h [[email protected]] has joined #linuxcnc
[14:36:41] -!- maximilian_h [[email protected]] has parted #linuxcnc
[14:39:48] -!- _BJfreeman [[email protected]] has joined #linuxcnc
[14:40:25] _BJfreeman is now known as BJfreeman
[14:43:45] -!- Valen has quit [Quit: Leaving.]
[14:44:47] -!- ve7it [[email protected]] has joined #linuxcnc
[14:45:31] -!- ve7it has quit [Remote host closed the connection]
[14:47:43] -!- ve7it [[email protected]] has joined #linuxcnc
[14:49:38] -!- Jooa [[email protected]] has joined #linuxcnc
[14:51:22] -!- DJ9DJ [DJ9DJ!~Deejay@unaffiliated/dj9dj] has joined #linuxcnc
[14:51:41] <DJ9DJ> re
[14:54:33] -!- Jooa [[email protected]] has parted #linuxcnc
[14:58:21] -!- ktchk [[email protected]] has joined #linuxcnc
[15:01:30] -!- psha[work] has quit [Quit: Lost terminal]
[15:10:55] -!- skunkworks has quit [Read error: Connection reset by peer]
[15:20:11] -!- fischli [[email protected]] has parted #linuxcnc
[15:22:25] -!- zzolo has quit [Client Quit]
[15:25:18] -!- Tecan has quit [Remote host closed the connection]
[15:29:20] -!- mhaberler [[email protected]] has joined #linuxcnc
[15:34:24] -!- jfire has quit [Quit: Leaving.]
[15:38:54] -!- skunkworks [[email protected]] has joined #linuxcnc
[15:46:34] -!- paideia has quit [Quit: Leaving]
[15:49:24] -!- Icekiller [[email protected]] has joined #linuxcnc
[15:49:46] <Icekiller> Hi guys i remember seeing a drawing for tr12x3 milled at both ends for use with 608zz
[15:49:50] <Icekiller> anyone have the link?
[15:50:44] <Icekiller> im wndering if both ends should just be milled down to 8mm the backend being 8mm long, and frontend 3cm
[15:52:13] -!- tjtr33 [[email protected]] has joined #linuxcnc
[15:53:09] -!- Bojangle1 [[email protected]] has joined #linuxcnc
[15:56:20] -!- Bojangles has quit [Ping timeout: 245 seconds]
[15:58:21] -!- Degot has quit [Quit: Leaving]
[16:04:13] -!- Kup has quit [Read error: Connection reset by peer]
[16:04:49] -!- stsydow has quit [Ping timeout: 256 seconds]
[16:05:24] -!- zzolo has quit [Ping timeout: 252 seconds]
[16:05:34] -!- mhaberler has quit [Quit: mhaberler]
[16:13:06] -!- mhaberler [[email protected]] has joined #linuxcnc
[16:25:59] -!- dway has quit [Quit: NOOOOOOooooooooo……]
[16:27:07] -!- jfire has quit [Quit: Leaving.]
[16:27:46] -!- hashfail_ has quit [Ping timeout: 252 seconds]
[16:30:47] -!- odogono has quit [Ping timeout: 252 seconds]
[16:34:17] <Loetmichel> hrhr, german flood...
http://narf-archive.com/pix/fd820e775b232470051ffcdd93c84ded78c6f839.jpeg
[16:34:18] -!- skorasaurus has quit [Ping timeout: 264 seconds]
[16:34:59] <Loetmichel> <- glad that he lives about 30 meters above the river "main"s level
[16:36:54] -!- BJfreeman has quit [Quit: had a good time]
[16:37:18] -!- stsydow has quit [Ping timeout: 264 seconds]
[16:40:07] <Mjolinor> don't open the window
[16:40:50] <Loetmichel> better not ;-)
[16:41:01] -!- jfire has quit [Quit: Leaving.]
[16:41:27] <Loetmichel> i hope for the photographer that his window gaskets and wallmount of the window holds against the water pressure.
[16:41:50] <Loetmichel> s/photographer/ unknown photographer
[16:43:16] <Loetmichel> but courious/nosy swan, isnt it?
[16:43:28] <Loetmichel> curious
[16:44:12] <Mjolinor> probably looking at the reflection wondering whether to attack or not
[16:46:04] <Loetmichel> better not... i diont think the 4mm glass wil hold the water AND a swans beak ;-)
[16:46:07] <Loetmichel> +l
[16:48:43] <archivist> gimme some bread he says
[16:51:24] <tjtr33> for Witchita: look at the 'Fishin Mobile Home Park" to rent a mobile for the fest :) just walking distance to MPM plus fishin!
[16:51:37] -!- IchGuckLive [[email protected]] has joined #linuxcnc
[16:51:45] <IchGuckLive> hi all
[16:55:35] -!- andypugh [andypugh!~andy2@cpc16-basl9-2-0-cust685.20-1.cable.virginmedia.com] has joined #linuxcnc
[16:57:56] -!- Tom_shop [[email protected]] has joined #linuxcnc
[17:09:13] -!- thesisb has quit [Quit: Leaving...]
[17:12:51] <IchGuckLive> !seen mices
[17:12:51] <the_wench> Never heard of the entity mices you ask for
[17:13:39] -!- tmcw has quit [Read error: Connection reset by peer]
[17:13:48] <archivist> !seen micges
[17:13:48] <the_wench> last seen in 2013-06-04 00:34:44GMT 17:39:04 ago, saying Quit: Leaving
[17:13:55] <archivist> spelling matters :)
[17:14:04] <IchGuckLive> O.O
[17:14:34] <IchGuckLive> so he is still on power at that water height mark
[17:15:57] -!- tmcw has quit [Read error: Connection reset by peer]
[17:17:38] -!- gimpswork has quit [Ping timeout: 252 seconds]
[17:25:13] -!- micges [[email protected]] has joined #linuxcnc
[17:25:20] <IchGuckLive> B)
[17:25:30] <IchGuckLive> micges: water ok
[17:25:38] -!- PetefromTn [[email protected]] has joined #linuxcnc
[17:25:53] <micges> IchGuckLive: good to hear
[17:26:14] <IchGuckLive> you not me
[17:26:39] <IchGuckLive> wee have been out today for planting corn to get the solar power !
[17:27:44] <Jymmm> IchGuckLive: Did you make sure it's not GMO corn?
[17:28:05] <IchGuckLive> yes not alowed in germany genetics
[17:30:04] -!- syyl_ws has quit [Quit: Verlassend]
[17:31:05] -!- tmcw_ has quit [Read error: Connection reset by peer]
[17:31:31] <Jymmm> IchGuckLive: Heh, it's banned in all of EU, Chile, and a few other coutnries
[17:31:33] -!- tmcw has quit [Read error: Connection reset by peer]
[17:32:08] <Jymmm> Even China has a semi-ban on it
[17:32:31] <Jymmm> (regulated import with approval)
[17:32:34] <IchGuckLive> dident know that ists a shame that we burn up the Best USA corn in our energie factories and the USA eats the Genetic ones
[17:33:05] <IchGuckLive> on there BBq
[17:33:10] <Jymmm> That's a great place for it, burned
[17:33:20] <Jymmm> burn it all
[17:33:23] <IchGuckLive> the good stuff
[17:33:41] <Jymmm> It's GMO, that's the WORSE Stuff imo
[17:33:55] -!- tmcw_ has quit [Read error: Connection reset by peer]
[17:34:13] <IchGuckLive> yes but the USA eats it and we in europ burn the genetic free
[17:34:28] <IchGuckLive> O.O
[17:34:37] <Jymmm> ah
[17:34:53] <Jymmm> Yep, it sucks.
[17:34:56] -!- tmcw has quit [Read error: Connection reset by peer]
[17:35:00] <Jymmm> Blame Monsanto.
[17:35:05] <IchGuckLive> after 3 days of no raiun here all farmers out lots of big realy big mashines in the fields
[17:35:25] <IchGuckLive> monsanto feats the world so no blame on them
[17:35:33] <IchGuckLive> they try the best they can
[17:35:37] <Jymmm> Monsanto created Agent Orange, DDT, Round Up, and GMO Crops
[17:35:55] <IchGuckLive> agree but all at the needed time
[17:36:11] <Jymmm> At what cost?
[17:36:17] <IchGuckLive> lives
[17:36:27] <Jymmm> The reason Chile banned it is becasue of birth defects
[17:36:30] <IchGuckLive> childrens health
[17:36:46] <Jymmm> exactly
[17:37:08] <Jymmm> Not worth the price imo
[17:37:11] <IchGuckLive> on the other side is the increase of 255 on the same Field
[17:37:18] <Jymmm> Just becasue you can, doens't mean you should
[17:37:20] <IchGuckLive> 25%
[17:38:18] <IchGuckLive> we will see more on the african continent as the arabs take over and doesent care on that
[17:38:51] <Jymmm> IchGuckLive: They have money to burn, so they actually might care.
[17:40:37] -!- _BJfreeman [[email protected]] has joined #linuxcnc
[17:41:35] <andypugh> Chile blames GMO corn for birth defects? That's just bizarre.
[17:41:56] <Jymmm> andypugh: 10 year study actually.
[17:42:07] _BJfreeman is now known as BJfreeman
[17:42:57] <Jymmm> andypugh: Monsanto "forced" them to use 5x the amount of RoundUp without protective measures and it seeped into the water system.
[17:43:28] <andypugh> Ah, OK. They are blaming weedkiller, not GMO corn then?
[17:44:01] <Jymmm> andypugh: Primarily RoundUp, but they are starting to discover bad traits on GMO too
[17:44:11] <Mjolinor> if they need weedkiller with genetically modified corn then they didn't modify it correctly
[17:45:02] <andypugh> So, deliberately adding the genetic traits you want is somehow more dangerous than adding it by a random process of breeding and hoping?
[17:45:04] <Jymmm> Mjolinor: weeds and pestisidces
[17:45:14] <jdh> vaccines are bad too
[17:45:24] <jdh> better to pray away the disease!
[17:45:53] <andypugh> No, that won't work, chemtrails block prayers!
[17:46:15] <IchGuckLive> http://focusonthehorn.files.wordpress.com/2012/09/saudi_star_agri_mat.jpg?w=400&h=190
[17:46:20] <jdh> should probably ban higher education also
[17:46:25] <IchGuckLive> they got money and africa the land !
[17:46:40] <Jymmm> andypugh: genetic alternations is not the same as just adding this + that though.
[17:46:47] <IchGuckLive> thats not farming thats industrial
[17:47:42] <andypugh> Jymmm: I am dropping the subject.
[17:48:00] <Jymmm> andypugh: =)
[17:49:07] <IchGuckLive> B)
[17:50:10] <Jymmm> andypugh: FWIW... California had a bill that failed to label all GMO food stuffs. Monsanto had put up a $4M campaign to prevent it from passing. Food for thought.
[17:51:03] -!- b_b has quit [Changing host]
[17:51:05] -!- tjtr33 has quit [Quit: Leaving]
[17:52:12] -!- _1SheYode [[email protected]] has joined #linuxcnc
[17:53:03] -!- bob1123_ [[email protected]] has joined #linuxcnc
[17:57:45] -!- jepler_ [jepler_!~jepler@emc/developer/pdpc.professional.jepler] has joined #linuxcnc
[17:57:48] -!- seb_kuzm1nsky [[email protected]] has joined #linuxcnc
[17:57:54] -!- rob__H [[email protected]] has joined #linuxcnc
[17:57:55] -!- toner [[email protected]] has joined #linuxcnc
[17:57:55] -!- uwe_mobile [[email protected]] has joined #linuxcnc
[17:57:57] -!- thesisb has quit [Quit: Leaving...]
[17:58:05] -!- logger[mah]_ [logger[mah][email protected]] has joined #linuxcnc
[17:58:09] -!- maximilian_h [[email protected]] has joined #linuxcnc
[17:59:13] -!- tris [tris!tristan@2001:1868:a00a::4] has joined #linuxcnc
[17:59:30] -!- ktchk has quit [Ping timeout: 264 seconds]
[17:59:31] -!- gambakufu has quit [Ping timeout: 264 seconds]
[17:59:32] -!- bob1123 has quit [Ping timeout: 264 seconds]
[17:59:35] -!- uwe_mobile__ has quit [Ping timeout: 264 seconds]
[17:59:35] -!- jleh has quit [Ping timeout: 264 seconds]
[17:59:38] -!- phillipadsmith has quit [Ping timeout: 264 seconds]
[17:59:38] -!- jepler has quit [Ping timeout: 264 seconds]
[17:59:39] -!- seb_kuzminsky has quit [Ping timeout: 264 seconds]
[17:59:41] -!- ryan_turner has quit [Ping timeout: 264 seconds]
[17:59:42] -!- rob_h has quit [Ping timeout: 264 seconds]
[17:59:43] -!- _ink has quit [Ping timeout: 264 seconds]
[17:59:45] -!- logger[mah] has quit [Ping timeout: 264 seconds]
[17:59:47] -!- neverho02 has quit [Ping timeout: 264 seconds]
[17:59:47] -!- Nick001 has quit [Ping timeout: 264 seconds]
[17:59:51] <IchGuckLive> lots of action
[18:00:37] -!- tris has quit [Excess Flood]
[18:01:21] -!- robh__ [[email protected]] has joined #linuxcnc
[18:01:51] -!- Nick001 [[email protected]] has joined #linuxcnc
[18:02:35] -!- ryan_turner [ryan_turner!Ryan@2600:3c02::f03c:91ff:fe70:c6b0] has joined #linuxcnc
[18:02:39] -!- Poincare has quit [Quit: changing servers]
[18:03:13] -!- Poincare [Poincare!~jefffnode@213.219.184.23.wls.msr03bkc3.adsl.static.edpnet.net] has joined #linuxcnc
[18:03:14] -!- maximilian_h has quit [Ping timeout: 264 seconds]
[18:03:16] -!- tris [tris!tristan@2001:1868:a00a::4] has joined #linuxcnc
[18:05:23] -!- servos4ever_ [servos4ever_!~chatzilla@173-87-50-96.dr01.hnvr.mi.frontiernet.net] has joined #linuxcnc
[18:05:35] -!- rob__H has quit [Ping timeout: 276 seconds]
[18:05:46] -!- _BJfreeman [[email protected]] has joined #linuxcnc
[18:05:49] -!- logger[mah] [logger[mah][email protected]] has joined #linuxcnc
[18:07:04] -!- t12 [[email protected]] has joined #linuxcnc
[18:07:07] -!- ler_hydra_ [[email protected]] has joined #linuxcnc
[18:07:29] seb_kuzm1nsky is now known as seb_kuzminsky
[18:07:47] -!- kanzure_ [[email protected]] has joined #linuxcnc
[18:07:49] -!- _Patang [[email protected]] has joined #linuxcnc
[18:08:38] -!- BJfreeman has quit [Ping timeout: 252 seconds]
[18:08:40] -!- logger[mah]_ has quit [Ping timeout: 252 seconds]
[18:08:41] -!- servos4ever has quit [Ping timeout: 252 seconds]
[18:08:48] -!- kanzure has quit [Ping timeout: 252 seconds]
[18:08:50] -!- _||_ has quit [Ping timeout: 252 seconds]
[18:08:51] -!- ler_hydra has quit [Ping timeout: 252 seconds]
[18:08:51] -!- largecheesepuff has quit [Ping timeout: 252 seconds]
[18:08:56] -!- t12_ has quit [Ping timeout: 252 seconds]
[18:08:59] -!- Patang has quit [Ping timeout: 252 seconds]
[18:08:59] -!- theorbtwo has quit [Ping timeout: 252 seconds]
[18:09:03] -!- Spida has quit [Ping timeout: 252 seconds]
[18:09:06] servos4ever_ is now known as servos4ever
[18:09:08] -!- Spida_ [[email protected]] has joined #linuxcnc
[18:09:10] Spida_ is now known as Spida
[18:09:14] -!- _BJfreeman has quit [Read error: Connection reset by peer]
[18:09:17] -!- chopper791 has quit [Ping timeout: 245 seconds]
[18:10:58] -!- pjm_ [[email protected]] has joined #linuxcnc
[18:11:04] -!- skunkworks has quit [Read error: Connection reset by peer]
[18:11:37] -!- steves_logging [[email protected]] has joined #linuxcnc
[18:12:27] -!- mhaberler has quit [Quit: mhaberler]
[18:12:54] -!- steve_stallings has quit [*.net *.split]
[18:12:54] -!- OhmEye has quit [*.net *.split]
[18:12:59] -!- Guest55324 has quit [*.net *.split]
[18:13:01] -!- SadMan has quit [*.net *.split]
[18:13:04] -!- frysteev has quit [*.net *.split]
[18:13:04] -!- uwe_ has quit [*.net *.split]
[18:13:05] -!- pjm has quit [*.net *.split]
[18:13:06] -!- ReadError has quit [*.net *.split]
[18:13:06] -!- largecheesepuff [[email protected]] has joined #linuxcnc
[18:13:10] -!- |1li has quit [Read error: Connection reset by peer]
[18:13:44] -!- cevad [[email protected]] has joined #linuxcnc
[18:14:18] cevad is now known as Guest53571
[18:14:28] -!- theorbtwo [[email protected]] has joined #linuxcnc
[18:14:38] -!- OhmEye [[email protected]] has joined #linuxcnc
[18:14:41] -!- pjm [[email protected]] has joined #linuxcnc
[18:14:45] -!- SadMan [[email protected]] has joined #linuxcnc
[18:14:57] -!- ReadError [[email protected]] has joined #linuxcnc
[18:15:46] -!- stsydow has quit [Quit: Leaving]
[18:15:49] Guest53571 is now known as davec
[18:15:59] -!- wboykinm has quit [Remote host closed the connection]
[18:16:17] -!- frysteev [[email protected]] has joined #linuxcnc
[18:16:27] -!- Gamma-X [[email protected]] has joined #linuxcnc
[18:16:35] -!- Aero-Tec2 [[email protected]] has joined #linuxcnc
[18:16:36] -!- toastyde2th [toastyde2th!~toast@2601:a:2e00:aa:29bd:9d53:c263:ba86] has joined #linuxcnc
[18:18:38] -!- PCW_ [[email protected]] has joined #linuxcnc
[18:19:21] <IchGuckLive> By
[18:19:24] -!- IchGuckLive has quit [Quit: ChatZilla 0.9.87 [Firefox 20.0/20130329043827]]
[18:19:30] -!- chopper791 [chopper791!~probotix@173-15-98-104-Illinois.hfc.comcastbusiness.net] has joined #linuxcnc
[18:22:42] -!- toastyde1th has quit [Read error: Connection reset by peer]
[18:23:09] -!- chopper79 has quit [Ping timeout: 256 seconds]
[18:23:28] -!- PCW has quit [Ping timeout: 256 seconds]
[18:24:13] -!- GammaX has quit [Ping timeout: 256 seconds]
[18:24:57] -!- Aero-Tec has quit [Ping timeout: 256 seconds]
[18:26:41] -!- PetefromTn [[email protected]] has parted #linuxcnc
[18:27:08] -!- pjm_ has quit [*.net *.split]
[18:27:37] -!- Aero-Tec3 [[email protected]] has joined #linuxcnc
[18:32:27] -!- phantoxeD has quit [Excess Flood]
[18:33:50] -!- tris has quit [Excess Flood]
[18:36:58] -!- putnik has quit [Remote host closed the connection]
[18:37:10] -!- fragalot has quit [Write error: Broken pipe]
[18:37:38] PCW_ is now known as PCW
[18:37:40] -!- SadMan has quit [Excess Flood]
[18:38:15] -!- linuxcnc-build has quit [Excess Flood]
[18:38:16] -!- Aero-Tec2 has quit [Ping timeout: 276 seconds]
[18:38:17] -!- skorasaurus has quit [Ping timeout: 264 seconds]
[18:38:20] -!- fragalot_ [[email protected]] has joined #linuxcnc
[18:38:43] -!- Nick001-Shop [[email protected]] has joined #linuxcnc
[18:39:18] -!- Joshsz has quit [Ping timeout: 256 seconds]
[18:39:18] -!- Err has quit [Ping timeout: 256 seconds]
[18:39:19] -!- krusty_ar_ has quit [Ping timeout: 256 seconds]
[18:39:19] -!- WalterN has quit [Ping timeout: 256 seconds]
[18:39:20] -!- morfic has quit [Ping timeout: 256 seconds]
[18:39:20] -!- Thetawaves has quit [Ping timeout: 256 seconds]
[18:39:20] -!- s1dev has quit [Ping timeout: 256 seconds]
[18:39:21] -!- mhaberler [[email protected]] has joined #linuxcnc
[18:39:21] -!- _BJfreeman [[email protected]] has joined #linuxcnc
[18:39:22] -!- WalterN [[email protected]] has joined #linuxcnc
[18:39:22] -!- Thetawaves [[email protected]] has joined #linuxcnc
[18:39:23] -!- pjm has quit [Read error: No buffer space available]
[18:39:23] -!- s1dev [[email protected]] has joined #linuxcnc
[18:39:23] -!- phantoneD [[email protected]] has joined #linuxcnc
[18:39:25] -!- morfic [morfic!~morfic@unaffiliated/morfic] has joined #linuxcnc
[18:39:25] -!- Gamma_X [[email protected]] has joined #linuxcnc
[18:39:26] -!- rob__H [[email protected]] has joined #linuxcnc
[18:39:26] -!- Aero-Tec2 [[email protected]] has joined #linuxcnc
[18:39:27] -!- Keknom [[email protected]] has joined #linuxcnc
[18:39:27] -!- pjm [[email protected]] has joined #linuxcnc
[18:39:27] -!- ler_hydra_ has quit [Remote host closed the connection]
[18:39:28] -!- putnik_ has quit [Changing host]
[18:39:28] -!- phantoxeD [[email protected]] has joined #linuxcnc
[18:39:30] -!- chopper79 [[email protected]] has joined #linuxcnc
[18:39:30] -!- stsydow has quit [Remote host closed the connection]
[18:39:31] -!- chron0 has quit [Ping timeout: 245 seconds]
[18:39:32] -!- t12_ [[email protected]] has joined #linuxcnc
[18:39:32] -!- DJ9DJ has quit [Ping timeout: 245 seconds]
[18:39:32] -!- cradek_ [[email protected]] has joined #linuxcnc
[18:39:33] -!- djinni` has quit [Ping timeout: 245 seconds]
[18:39:34] -!- jepler [jepler!~jepler@emc/developer/pdpc.professional.jepler] has joined #linuxcnc
[18:39:36] -!- phantoneD has quit [Ping timeout: 289 seconds]
[18:39:49] -!- TekniQue_ [[email protected]] has joined #linuxcnc
[18:39:59] -!- djinni` [djinni`[email protected]] has joined #linuxcnc
[18:40:11] -!- davec_ [[email protected]] has joined #linuxcnc
[18:40:11] -!- phantoneD [[email protected]] has joined #linuxcnc
[18:40:44] -!- SadMan_ [[email protected]] has joined #linuxcnc
[18:40:45] _BJfreeman is now known as BJfreeman
[18:40:47] -!- Nick001-Shop has quit [Ping timeout: 245 seconds]
[18:40:47] -!- beawesomeinstead has quit [Ping timeout: 245 seconds]
[18:40:47] -!- ybon has quit [Ping timeout: 245 seconds]
[18:40:47] -!- XiXora_ has quit [Ping timeout: 245 seconds]
[18:40:48] -!- SadMan_ has quit [Excess Flood]
[18:40:49] -!- djinni` has quit [Excess Flood]
[18:41:02] -!- SadMan [[email protected]] has joined #linuxcnc
[18:41:07] -!- Nick001-Shop [[email protected]] has joined #linuxcnc
[18:41:08] BJfreeman is now known as Guest29917
[18:41:18] -!- tris [tris!tristan@2001:1868:a00a::4] has joined #linuxcnc
[18:41:30] -!- djinni` [djinni`[email protected]] has joined #linuxcnc
[18:41:48] -!- phantoxeD has quit [Ping timeout: 265 seconds]
[18:41:49] -!- DaViruz has quit [Ping timeout: 265 seconds]
[18:41:55] -!- DaViruz [[email protected]] has joined #linuxcnc
[18:42:16] -!- chron0 [chron0!~chrono@unaffiliated/chron0] has joined #linuxcnc
[18:43:01] -!- FinboySlick has quit [Ping timeout: 243 seconds]
[18:43:17] -!- doobeh_ has quit [Write error: Connection reset by peer]
[18:43:38] -!- FinboySlick [[email protected]] has joined #linuxcnc
[18:43:46] -!- louis___ [[email protected]] has joined #linuxcnc
[18:43:53] -!- louis___ has quit [Remote host closed the connection]
[18:44:08] -!- jerryitt has quit [Write error: Connection reset by peer]
[18:44:34] -!- t12_ has quit [Ping timeout: 278 seconds]
[18:44:36] -!- uwe_mobile has quit [Ping timeout: 278 seconds]
[18:44:37] -!- cmorley1 [[email protected]] has joined #linuxcnc
[18:44:39] -!- uwe_mobile [[email protected]] has joined #linuxcnc
[18:44:40] -!- t12_ [[email protected]] has joined #linuxcnc
[18:44:41] -!- Err [[email protected]] has joined #linuxcnc
[18:44:42] -!- tris has quit [Excess Flood]
[18:46:25] -!- Tom_shop has quit [Ping timeout: 257 seconds]
[18:46:41] -!- Guest29917 has quit [Ping timeout: 245 seconds]
[18:46:41] -!- seb_kuzm1nsky [[email protected]] has joined #linuxcnc
[18:46:42] -!- Tom_shop [[email protected]] has joined #linuxcnc
[18:46:43] ybon- is now known as ybon
[18:46:45] -!- largecheesepuff has quit [Read error: Operation timed out]
[18:46:45] -!- ve7it has quit [Ping timeout: 276 seconds]
[18:46:48] -!- OhmEye has quit [Excess Flood]
[18:46:48] -!- ve7it [[email protected]] has joined #linuxcnc
[18:46:49] -!- _BJfreeman [[email protected]] has joined #linuxcnc
[18:46:51] -!- DJ9DJ [DJ9DJ!~Deejay@unaffiliated/dj9dj] has joined #linuxcnc
[18:46:51] -!- OhmEye [[email protected]] has joined #linuxcnc
[18:47:18] -!- archivist_ [[email protected]] has joined #linuxcnc
[18:47:50] -!- tris [tris!~tristan@2001:1868:a00a::4] has joined #linuxcnc
[18:47:56] -!- eric_unterhause1 [[email protected]] has joined #linuxcnc
[18:48:45] -!- largecheesepuff [[email protected]] has joined #linuxcnc
[18:48:52] -!- Aero-Tec3 has quit [*.net *.split]
[18:48:55] -!- Gamma-X has quit [*.net *.split]
[18:48:57] -!- davec has quit [*.net *.split]
[18:48:59] -!- Spida has quit [*.net *.split]
[18:48:59] -!- t12 has quit [*.net *.split]
[18:49:00] -!- robh__ has quit [*.net *.split]
[18:49:00] -!- seb_kuzminsky has quit [*.net *.split]
[18:49:01] -!- jepler_ has quit [*.net *.split]
[18:49:01] -!- tmcw has quit [*.net *.split]
[18:49:03] -!- mle has quit [*.net *.split]
[18:49:03] -!- eric_unterhausen has quit [*.net *.split]
[18:49:03] -!- doobeh has quit [*.net *.split]
[18:49:04] -!- roycroft has quit [*.net *.split]
[18:49:04] -!- RyanS has quit [*.net *.split]
[18:49:04] -!- schumaml has quit [*.net *.split]
[18:49:04] -!- TekniQue has quit [*.net *.split]
[18:49:05] -!- cradek has quit [*.net *.split]
[18:49:06] -!- mal`` has quit [*.net *.split]
[18:49:07] -!- louis__ has quit [*.net *.split]
[18:49:07] -!- cmorley has quit [*.net *.split]
[18:49:08] -!- archivist has quit [*.net *.split]
[18:49:11] mle- is now known as mle
[18:49:21] -!- tris has quit [Excess Flood]
[18:49:21] -!- RyanS [[email protected]] has joined #linuxcnc
[18:49:25] -!- Spida [[email protected]] has joined #linuxcnc
[18:49:33] -!- roycroft [[email protected]] has joined #linuxcnc
[18:49:48] -!- tris [tris!tristan@2001:1868:a00a::4] has joined #linuxcnc
[18:50:15] -!- tmcw_ has quit [Write error: Connection reset by peer]
[18:50:57] -!- pjm has quit [Read error: Connection reset by peer]
[18:51:07] -!- pjm [[email protected]] has joined #linuxcnc
[18:52:09] -!- _BJfreeman has quit [Ping timeout: 252 seconds]
[18:53:51] -!- _BJfreeman [[email protected]] has joined #linuxcnc
[18:54:01] -!- _BJfreeman has quit [Read error: Connection reset by peer]
[18:54:12] <ughhhhh> So i know i had this figured out before, but it's been so long i forgot how i fixed it. When i touch off a tool i'm having issues touching off work offsets in my lathe.
[18:54:30] <ughhhhh> opps that came out wrong
[18:54:46] <JT-Shop> didn't make any sense at all
[18:54:53] <ughhhhh> i'm having issues touching off work offsets in my lathe
[18:55:13] <ughhhhh> the sentence i started didnt fully delete
[18:55:34] <Mjolinor> blame bill gates
[18:56:48] cradek_ is now known as cradek
[18:56:49] <ughhhhh> when i touch off a work offset with tool 3 in g54, and touch off tool 5's tool offsets in g54, then i use tool 3 to touch off work offset 59.3, tool 5 isn't even in the same ballpark in g59.3]
[18:56:53] -!- cradek has quit [Changing host]
[18:56:53] -!- cradek [cradek!~chris@emc/board-of-directors/cradek] has joined #linuxcnc
[18:56:53] -!- mode/#linuxcnc [+v cradek] by ChanServ
[18:57:39] <ughhhhh> tool 3 and 5 should be relative to each other, based on the tool offsets, no matter what work offset i use
[18:58:29] <ughhhhh> i had this problem a long time ago, but i now have a fresh install and i dont remember how i fixed it
[18:59:41] -!- motioncontrol [motioncontrol!~io@host124-75-dynamic.246-95-r.retail.telecomitalia.it] has joined #linuxcnc
[18:59:54] <ughhhhh> i am now running 2.5
[19:00:03] -!- Nick001-Shop_ [[email protected]] has joined #linuxcnc
[19:00:10] -!- thesisb has quit [Quit: Leaving...]
[19:00:46] -!- archivist [[email protected]] has joined #linuxcnc
[19:01:06] -!- _BJfreeman [[email protected]] has joined #linuxcnc
[19:01:52] seb_kuzm1nsky is now known as seb_kuzminsky
[19:03:37] -!- DaViruz_ [[email protected]] has joined #linuxcnc
[19:03:48] -!- FinboySlick1 [[email protected]] has joined #linuxcnc
[19:03:49] -!- uwe_mobile__ [[email protected]] has joined #linuxcnc
[19:03:49] -!- ReadError_ [[email protected]] has joined #linuxcnc
[19:03:50] -!- grummund_ [grummund_!~user@unaffiliated/grummund] has joined #linuxcnc
[19:03:50] <ughhhhh> that make sense at all?
[19:03:51] -!- kanzure [[email protected]] has joined #linuxcnc
[19:03:58] -!- Vq_ [[email protected]] has joined #linuxcnc
[19:04:02] -!- sumpfralle [[email protected]] has joined #linuxcnc
[19:04:29] -!- micges_ [[email protected]] has joined #linuxcnc
[19:05:02] -!- ryan_turner_ [ryan_turner_!Ryan@2600:3c02::f03c:91ff:fe70:c6b0] has joined #linuxcnc
[19:05:23] <JT-Shop> are you using touch off to fixture to set up your tools?
[19:05:34] -!- FinboySlick has quit [Disconnected by services]
[19:05:37] -!- RyanS has quit [Ping timeout: 245 seconds]
[19:05:41] -!- Nick001-Shop has quit [Ping timeout: 245 seconds]
[19:05:43] -!- jfire has quit [Ping timeout: 245 seconds]
[19:05:44] -!- aude has quit [Ping timeout: 245 seconds]
[19:05:49] -!- archivist_ has quit [Ping timeout: 245 seconds]
[19:05:49] -!- mle has quit [Ping timeout: 245 seconds]
[19:05:50] -!- uwe_mobile has quit [Ping timeout: 245 seconds]
[19:05:52] -!- ReadError has quit [Ping timeout: 245 seconds]
[19:05:52] -!- ryan_turner has quit [Ping timeout: 245 seconds]
[19:05:52] -!- micges has quit [Ping timeout: 245 seconds]
[19:05:52] -!- grummund has quit [Ping timeout: 245 seconds]
[19:05:53] -!- postaL has quit [Ping timeout: 245 seconds]
[19:05:54] -!- Vq has quit [Ping timeout: 245 seconds]
[19:05:54] -!- DaViruz has quit [Ping timeout: 245 seconds]
[19:05:55] -!- kanzure_ has quit [Ping timeout: 245 seconds]
[19:05:57] -!- chron0 has quit [Ping timeout: 245 seconds]
[19:05:57] -!- chron0 [[email protected]] has joined #linuxcnc
[19:05:58] -!- linuxcnc-build_ has quit [Ping timeout: 245 seconds]
[19:05:59] FinboySlick1 is now known as FinboySlick
[19:05:59] mle- is now known as mle
[19:06:00] -!- chron0 has quit [Changing host]
[19:06:00] -!- chron0 [chron0!~chrono@unaffiliated/chron0] has joined #linuxcnc
[19:06:31] Nick001-Shop_ is now known as Nick001-Shop
[19:06:48] <ughhhhh> JT-Shop: no idea? i'm using the tool touch off in the drop down menu in the touch off box
[19:06:52] -!- RyanS [[email protected]] has joined #linuxcnc
[19:07:40] -!- _BJfreeman has quit [Ping timeout: 262 seconds]
[19:09:06] <JT-Shop> see the menu items
http://www.linuxcnc.org/docs/html/gui/axis.html#_menu_items
[19:09:56] ryan_turner_ is now known as ryan_turner
[19:11:40] -!- postaL [[email protected]] has joined #linuxcnc
[19:12:06] -!- chopper79 has quit [Ping timeout: 256 seconds]
[19:12:45] <ughhhhh> i need it to be relative to the work offset (g54, g57, etc)
[19:13:04] -!- Vq [[email protected]] has joined #linuxcnc
[19:14:24] -!- frysteev_ [[email protected]] has joined #linuxcnc
[19:14:41] -!- sumpfralle has quit [*.net *.split]
[19:14:42] -!- kanzure has quit [*.net *.split]
[19:14:42] -!- mle has quit [*.net *.split]
[19:14:44] -!- frysteev has quit [*.net *.split]
[19:14:49] micges_ is now known as micges
[19:15:11] <JT-Shop> was that a question?
[19:15:50] <Tom_shop> if set to workpiece isn't selected it can mess you up. i know it did me on my mill
[19:16:02] -!- kanzure [[email protected]] has joined #linuxcnc
[19:16:38] <Tom_shop> set all the tools to one point, then touchoff each fixture offset to the currently selected tool
[19:16:39] <ughhhhh> JT-Shop: im afraid i am confused.
[19:17:13] -!- sumpfralle [[email protected]] has joined #linuxcnc
[19:17:21] <JT-Shop> tell us what your trying to do being as descriptive as possible
[19:17:22] <ughhhhh> i want all my tool offsets relative to each other, no matter what work offset i use
[19:17:27] <Tom_shop> with 'Machine -> touchoff to workpiece' selected
[19:17:30] <JT-Shop> ok
[19:18:03] <JT-Shop> when you touch off the Z to something like your spindle face make sure touch off to fixture is checked
[19:18:10] <ughhhhh> i dont want tool 5 to suddenly be 3 inches off from tool 3 when i switch from g54 to g59.3
[19:18:24] <JT-Shop> next take one tool and touch off to the material making sure touch off to material is checked
[19:18:32] -!- Vq_ has quit [Ping timeout: 248 seconds]
[19:19:00] <ughhhhh> JT-Shop: is this new? i've never had to do that before
[19:19:08] -!- spiderdi1on has quit [Ping timeout: 246 seconds]
[19:19:12] <ughhhhh> i just upgraded from 2.4 to 2.5
[19:19:13] <JT-Shop> 2.5 yes
[19:19:16] <ughhhhh> ahhhhh
[19:19:22] <JT-Shop> would you like to see a tutorial?
[19:19:25] <Tom_shop> splains alot
[19:19:50] <ssi> anyone know if it's possible to get aluminum tooling plate in 7/8" thicknesses?
[19:19:55] <ughhhhh> JT-Shop: i wasnt aware there was a change, that's the issue
[19:20:28] <ughhhhh> JT-Shop: so if i set it to touch off workpiece, it will work the same as the old version?
[19:20:41] <JT-Shop> prior to the change you had to select an unused coordinate system your self so old habits if good would still work
[19:20:51] -!- spiderdijon [[email protected]] has joined #linuxcnc
[19:21:00] <JT-Shop> yes
[19:21:09] <ughhhhh> oh it was set to touch off to workpiece
[19:24:20] <Tom_itx> JT-Shop, can't you just leave it set on 'touchoff to workpiece' even when setting the tools?
[19:26:13] <JT-Shop> you can do anything you like
[19:26:55] <JT-Shop> I assume that was added to make life easier when you have presettable tools
[19:28:11] <Tom_itx> well, i just wasn't sure what 'touchoff to fixture' was for
[19:28:25] <JT-Shop> http://www.linuxcnc.org/docs/html/gui/axis.html#_menu_items
[19:28:27] <Tom_itx> i know it messed me up a time or two
[19:28:52] <JT-Shop> that's why I have pyvcp buttons for touch off
[19:29:11] <Tom_itx> for g54 etc?
[19:29:25] <JT-Shop> tool touch off
[19:29:33] <Tom_itx> i set up buttons for G54 x y z
[19:30:33] -!- thesisb has quit [Quit: Leaving...]
[19:31:22] -!- sumpfralle1 [[email protected]] has joined #linuxcnc
[19:31:22] <Tom_itx> typo
[19:31:37] <Tom_itx> relative to the ninth (G59.3)
[19:32:02] -!- jerryitt has quit [Quit: Leaving.]
[19:34:19] -!- sumpfralle has quit [Ping timeout: 276 seconds]
[19:37:22] -!- Tom_shop has quit [Quit: Leaving]
[19:38:09] -!- sumpfralle1 has quit [Ping timeout: 248 seconds]
[19:38:28] -!- sumpfralle [[email protected]] has joined #linuxcnc
[19:41:39] -!- jfire1 has quit [Quit: Leaving.]
[19:50:28] -!- mle has quit [Excess Flood]
[19:53:46] <ughhhhh> ok this is weird... i have a g43h5 in my program, however it seems to be ignoring it
[19:54:14] <ughhhhh> if i hit escape to end the program and mdi g43h5, it goes to the proper offset
[19:54:26] <ughhhhh> maybe thats my issue
[19:55:46] <JT-Shop> I never use G43 without a tool change
[19:56:11] <ughhhhh> there is a tool change on the previous line
[19:56:21] <ughhhhh> but regardless, it always worked fine before
[19:57:30] <ughhhhh> i use g43 all the time for gang tooling, without a toolchange
[19:57:49] <ughhhhh> i'll have 3 tool offsets for the same tool position on the turret
[19:58:50] <ughhhhh> not sure why it's choosing to ignore the g43 durring the program
[19:59:15] <ughhhhh> if i do a g43h5 in mdi before i run that part of the program, it's fine
[19:59:17] <JT-Shop> if it worked fine before it should still work fine
[19:59:34] <ughhhhh> fresh install, switched to 2.5
[19:59:34] <JT-Shop> are you doing a run from line?
[19:59:50] <JT-Shop> <JT-Shop> if it worked fine before it should still work fine
[20:00:43] <JT-Shop> however I've seen strange things when hitting esc during a program
[20:00:59] <JT-Shop> with offsets
[20:01:01] <ughhhhh> JT-Shop: but it isnt working fine now. no i'm not doing a run from line at first. then when it almost crashes the tool, i hit escape, then do mdi g43h5, then run from line
[20:01:03] <JT-Shop> and .....
[20:01:15] -!- sumpfralle has quit [Read error: Connection reset by peer]
[20:01:19] -!- sumpfralle1 [[email protected]] has joined #linuxcnc
[20:01:40] <ughhhhh> i tried running the program from the beginning several times, it is ignoring the g43h5
[20:02:01] <JT-Shop> I've seen that before hitting esc and the offset adds to the current offset
[20:02:49] <ughhhhh> i tried running the whole program before ever hitting escape. it is not changing the offset, it is just ignoring the g43h5
[20:03:05] <ughhhhh> or something is canceling it
[20:04:03] <JT-Shop> I one sub that uses G10 L20 P1 Z0.000 in a if condition and if I hit esc the offset gets applied somehow even though I've not reached that line. Rebooting is the only fix for me
[20:04:56] <ughhhhh> http://pastebin.com/TWs47i0L
[20:05:05] <ughhhhh> second tool is where the issue is
[20:14:32] -!- davec_ has quit [Ping timeout: 260 seconds]
[20:15:31] -!- PCW has quit [Ping timeout: 261 seconds]
[20:15:56] -!- linuxcnc-build has quit [Ping timeout: 260 seconds]
[20:16:48] -!- PCW [[email protected]] has joined #linuxcnc
[20:17:20] -!- micges has quit [Ping timeout: 260 seconds]
[20:18:47] -!- odogono has quit [*.net *.split]
[20:18:49] -!- arconquit has quit [*.net *.split]
[20:18:50] -!- kanzure has quit [*.net *.split]
[20:18:52] -!- DaViruz_ has quit [*.net *.split]
[20:18:52] -!- ReadError_ has quit [*.net *.split]
[20:18:52] -!- pjm has quit [*.net *.split]
[20:18:52] -!- jleh has quit [*.net *.split]
[20:18:52] -!- Fox_Muldr has quit [*.net *.split]
[20:18:53] -!- thesisb has quit [*.net *.split]
[20:18:54] -!- grummund_ has quit [*.net *.split]
[20:18:54] -!- FinboySlick has quit [*.net *.split]
[20:18:55] -!- tmcw has quit [*.net *.split]
[20:18:55] -!- roycroft has quit [*.net *.split]
[20:18:55] -!- Spida has quit [*.net *.split]
[20:18:55] -!- largecheesepuff has quit [*.net *.split]
[20:18:56] -!- eric_unterhause1 has quit [*.net *.split]
[20:18:56] -!- Poincare has quit [*.net *.split]
[20:18:56] -!- jthornton has quit [*.net *.split]
[20:18:56] -!- zlog has quit [*.net *.split]
[20:18:57] -!- Connor has quit [*.net *.split]
[20:18:57] -!- stephanj has quit [*.net *.split]
[20:18:58] -!- mattiasb has quit [*.net *.split]
[20:18:59] -!- ds3 has quit [*.net *.split]
[20:19:00] -!- zultron has quit [*.net *.split]
[20:19:02] -!- putnik_ has quit [*.net *.split]
[20:19:03] -!- Keknom has quit [*.net *.split]
[20:19:03] -!- Aero-Tec2 has quit [*.net *.split]
[20:19:03] -!- rob__H has quit [*.net *.split]
[20:19:03] -!- morfic has quit [*.net *.split]
[20:19:07] -!- |1li has quit [*.net *.split]
[20:19:09] -!- servos4ever has quit [*.net *.split]
[20:19:10] -!- Nick001 has quit [*.net *.split]
[20:19:10] -!- neverho01 has quit [*.net *.split]
[20:19:11] -!- toner has quit [*.net *.split]
[20:19:13] -!- zzolo_ has quit [*.net *.split]
[20:19:15] -!- ravenlock has quit [*.net *.split]
[20:19:19] -!- mrsun has quit [*.net *.split]
[20:19:23] -!- doobeh_ has quit [*.net *.split]
[20:19:33] -!- ingsoc has quit [*.net *.split]
[20:19:47] -!- jef79m has quit [*.net *.split]
[20:19:47] -!- l0ggy has quit [*.net *.split]
[20:19:50] -!- aude_ has quit [*.net *.split]
[20:19:52] -!- stsydow has quit [*.net *.split]
[20:19:52] -!- archivist has quit [*.net *.split]
[20:19:56] -!- ybon has quit [*.net *.split]
[20:19:58] -!- cradek has quit [*.net *.split]
[20:19:59] -!- fragalot_ has quit [*.net *.split]
[20:19:59] -!- chopper791 has quit [*.net *.split]
[20:20:05] -!- KimK_2 has quit [*.net *.split]
[20:20:13] -!- ryan_turner has quit [*.net *.split]
[20:20:26] -!- toastyde2th has quit [*.net *.split]
[20:20:43] -!- awallin has quit [*.net *.split]
[20:20:44] -!- jst has quit [*.net *.split]
[20:20:49] -!- Blorb has quit [*.net *.split]
[20:20:49] -!- netxshare has quit [*.net *.split]
[20:20:52] -!- Mjolinor has quit [*.net *.split]
[20:20:52] -!- syyl has quit [*.net *.split]
[20:20:59] -!- fiesh has quit [*.net *.split]
[20:21:05] -!- L84Supper has quit [*.net *.split]
[20:21:09] -!- JT-Shop has quit [*.net *.split]
[20:21:12] -!- frewsxcv has quit [*.net *.split]
[20:21:12] -!- the_wench has quit [*.net *.split]
[20:21:13] -!- nots_ has quit [*.net *.split]
[20:21:17] -!- Komzpa has quit [*.net *.split]
[20:21:20] -!- gene78 has quit [*.net *.split]
[20:21:24] -!- toxx has quit [*.net *.split]
[20:21:32] -!- Joshsz_ has quit [*.net *.split]
[20:21:37] -!- theorbtwo has quit [*.net *.split]
[20:21:38] -!- steves_logging has quit [*.net *.split]
[20:21:40] -!- logger[mah] has quit [*.net *.split]
[20:21:42] -!- bob1123_ has quit [*.net *.split]
[20:21:42] -!- _1SheYode has quit [*.net *.split]
[20:21:42] -!- b_b has quit [*.net *.split]
[20:21:43] -!- Icekiller has quit [*.net *.split]
[20:21:44] -!- Laremere has quit [*.net *.split]
[20:21:45] -!- archivist_herron has quit [*.net *.split]
[20:21:45] -!- arekm has quit [*.net *.split]
[20:21:46] -!- fatpandas has quit [*.net *.split]
[20:21:46] -!- joe9 has quit [*.net *.split]
[20:21:48] -!- KGB-linuxcnc has quit [*.net *.split]
[20:21:49] -!- pcw_home has quit [*.net *.split]
[20:21:50] -!- gonzo_ has quit [*.net *.split]
[20:21:50] -!- juxta has quit [*.net *.split]
[20:21:50] -!- shurshur has quit [*.net *.split]
[20:21:55] -!- cpresser has quit [*.net *.split]
[20:21:55] -!- Oo_BIGeye has quit [*.net *.split]
[20:21:56] -!- jdh has quit [*.net *.split]
[20:21:56] -!- roh has quit [*.net *.split]
[20:21:57] -!- phillipadsmith has quit [*.net *.split]
[20:22:00] -!- RyanS has quit [*.net *.split]
[20:22:03] -!- ve7it has quit [*.net *.split]
[20:22:05] -!- L33TG33KG34R has quit [*.net *.split]
[20:22:07] -!- Logxen has quit [*.net *.split]
[20:22:13] -!- andypugh has quit [*.net *.split]
[20:22:14] -!- Bojangle1 has quit [*.net *.split]
[20:22:15] -!- vladimirek has quit [*.net *.split]
[20:22:16] -!- LeelooMinai has quit [*.net *.split]
[20:22:16] -!- Jymmm has quit [*.net *.split]
[20:22:16] -!- ssi has quit [*.net *.split]
[20:22:17] -!- asdfasd has quit [*.net *.split]
[20:22:17] -!- jfrmilner has quit [*.net *.split]
[20:22:17] -!- RagingComputer has quit [*.net *.split]
[20:22:17] -!- gimps has quit [*.net *.split]
[20:22:17] -!- c-bob| has quit [*.net *.split]
[20:22:18] -!- Loetmichel has quit [*.net *.split]
[20:22:18] -!- carper64_lb has quit [*.net *.split]
[20:22:18] -!- yannickoo_ has quit [*.net *.split]
[20:22:19] -!- firephoto_ has quit [*.net *.split]
[20:22:20] -!- ChanServ has quit [*.net *.split]
[20:22:38] -!- mle has quit [*.net *.split]
[20:22:38] -!- postaL has quit [*.net *.split]
[20:22:39] -!- chron0 has quit [*.net *.split]
[20:22:39] -!- _Patang has quit [*.net *.split]
[20:22:40] -!- markvandenborre has quit [*.net *.split]
[20:22:41] -!- Gigs- has quit [*.net *.split]
[20:22:43] -!- Vq has quit [*.net *.split]
[20:22:44] -!- ughhhhh has quit [*.net *.split]
[20:22:44] -!- i_tarzan has quit [*.net *.split]
[20:22:44] -!- KimK has quit [*.net *.split]
[20:22:46] -!- oddover has quit [*.net *.split]
[20:22:46] -!- crank has quit [*.net *.split]
[20:22:46] -!- mozmck has quit [*.net *.split]
[20:22:46] -!- alex_joni has quit [*.net *.split]
[20:22:47] -!- foo303 has quit [*.net *.split]
[20:22:49] -!- spiderdijon has quit [*.net *.split]
[20:22:50] -!- uwe_mobile__ has quit [*.net *.split]
[20:22:51] -!- DJ9DJ has quit [*.net *.split]
[20:22:51] -!- OhmEye has quit [*.net *.split]
[20:22:51] -!- seb_kuzminsky has quit [*.net *.split]
[20:22:52] -!- Err has quit [*.net *.split]
[20:22:52] -!- t12_ has quit [*.net *.split]
[20:22:52] -!- cmorley1 has quit [*.net *.split]
[20:22:52] -!- schumaml_ has quit [*.net *.split]
[20:22:52] -!- mal``` has quit [*.net *.split]
[20:22:54] -!- jepler has quit [*.net *.split]
[20:22:56] -!- Gamma_X has quit [*.net *.split]
[20:22:57] -!- s1dev has quit [*.net *.split]
[20:22:57] -!- Thetawaves has quit [*.net *.split]
[20:22:57] -!- krusty_ar has quit [*.net *.split]
[20:22:57] -!- WalterN has quit [*.net *.split]
[20:22:57] -!- mhaberler has quit [*.net *.split]
[20:23:10] -!- tris has quit [Max SendQ exceeded]
[20:23:12] -!- sumpfralle1 has quit [Write error: Connection reset by peer]
[20:27:12] -!- phantoneD has quit [Ping timeout: 403 seconds]
[20:27:14] -!- SadMan has quit [Excess Flood]
[20:27:17] -!- motioncontrol has quit [Remote host closed the connection]
[20:27:21] -!- TekniQue_ has quit [Write error: Broken pipe]
[20:27:26] -!- frysteev_ has quit [Remote host closed the connection]
[20:27:30] -!- sumpfralle [[email protected]] has joined #linuxcnc
[20:30:01] -!- tris [tris!tristan@2001:1868:a00a::4] has joined #linuxcnc
[20:30:01] -!- mhaberler [[email protected]] has joined #linuxcnc
[20:30:01] -!- SadMan [[email protected]] has joined #linuxcnc
[20:30:01] -!- frysteev [[email protected]] has joined #linuxcnc
[20:30:01] -!- TekniQue [TekniQue!baldur@unaffiliated/teknique] has joined #linuxcnc
[20:30:01] -!- motioncontrol [motioncontrol!~io@host124-75-dynamic.246-95-r.retail.telecomitalia.it] has joined #linuxcnc
[20:30:01] -!- KimK_2 [[email protected]] has joined #linuxcnc
[20:30:01] -!- micges [[email protected]] has joined #linuxcnc
[20:30:01] -!- phantoxeD [[email protected]] has joined #linuxcnc
[20:30:02] -!- Guest71356 [[email protected]] has joined #linuxcnc
[20:30:02] -!- spiderdijon [[email protected]] has joined #linuxcnc
[20:30:02] -!- kanzure [[email protected]] has joined #linuxcnc
[20:30:02] -!- Vq [[email protected]] has joined #linuxcnc
[20:30:02] -!- postaL [[email protected]] has joined #linuxcnc
[20:30:02] -!- RyanS [[email protected]] has joined #linuxcnc
[20:30:02] -!- chron0 [chron0!~chrono@unaffiliated/chron0] has joined #linuxcnc
[20:30:02] -!- ryan_turner [ryan_turner!Ryan@2600:3c02::f03c:91ff:fe70:c6b0] has joined #linuxcnc
[20:30:02] -!- grummund_ [grummund_!~user@unaffiliated/grummund] has joined #linuxcnc
[20:30:02] -!- ReadError_ [[email protected]] has joined #linuxcnc
[20:30:02] -!- uwe_mobile__ [[email protected]] has joined #linuxcnc
[20:30:02] -!- FinboySlick [[email protected]] has joined #linuxcnc
[20:30:02] -!- DaViruz_ [[email protected]] has joined #linuxcnc
[20:30:02] -!- archivist [[email protected]] has joined #linuxcnc
[20:30:02] -!- pjm [[email protected]] has joined #linuxcnc
[20:30:02] -!- roycroft [[email protected]] has joined #linuxcnc
[20:30:02] -!- Spida [[email protected]] has joined #linuxcnc
[20:30:02] -!- largecheesepuff [[email protected]] has joined #linuxcnc
[20:30:02] -!- eric_unterhause1 [[email protected]] has joined #linuxcnc
[20:30:02] -!- OhmEye [[email protected]] has joined #linuxcnc
[20:30:02] -!- DJ9DJ [DJ9DJ!~Deejay@unaffiliated/dj9dj] has joined #linuxcnc
[20:30:03] -!- ve7it [[email protected]] has joined #linuxcnc
[20:30:03] -!- seb_kuzminsky [[email protected]] has joined #linuxcnc
[20:30:03] -!- Err [[email protected]] has joined #linuxcnc
[20:30:03] -!- t12_ [[email protected]] has joined #linuxcnc
[20:30:03] -!- cmorley1 [[email protected]] has joined #linuxcnc
[20:30:03] -!- jepler [jepler!~jepler@emc/developer/pdpc.professional.jepler] has joined #linuxcnc
[20:30:03] -!- cradek [cradek!~chris@emc/board-of-directors/cradek] has joined #linuxcnc
[20:30:03] -!- Keknom [[email protected]] has joined #linuxcnc
[20:30:03] -!- Aero-Tec2 [[email protected]] has joined #linuxcnc
[20:30:03] -!- rob__H [[email protected]] has joined #linuxcnc
[20:30:03] -!- Gamma_X [[email protected]] has joined #linuxcnc
[20:30:03] -!- morfic [morfic!~morfic@unaffiliated/morfic] has joined #linuxcnc
[20:30:03] -!- s1dev [[email protected]] has joined #linuxcnc
[20:30:03] -!- Thetawaves [[email protected]] has joined #linuxcnc
[20:30:03] -!- WalterN [[email protected]] has joined #linuxcnc
[20:30:03] -!- fragalot_ [[email protected]] has joined #linuxcnc
[20:30:03] -!- mode/#linuxcnc [+v cradek] by calvino.freenode.net
[20:30:03] -!- chopper791 [chopper791!~probotix@173-15-98-104-Illinois.hfc.comcastbusiness.net] has joined #linuxcnc
[20:30:03] -!- toastyde2th [toastyde2th!~toast@2601:a:2e00:aa:29bd:9d53:c263:ba86] has joined #linuxcnc
[20:30:03] -!- theorbtwo [[email protected]] has joined #linuxcnc
[20:30:03] -!- steves_logging [[email protected]] has joined #linuxcnc
[20:30:03] -!- _Patang [[email protected]] has joined #linuxcnc
[20:30:03] -!- logger[mah] [logger[mah][email protected]] has joined #linuxcnc
[20:30:04] -!- servos4ever [[email protected]] has joined #linuxcnc
[20:30:04] -!- Poincare [Poincare!~jefffnode@213.219.184.23.wls.msr03bkc3.adsl.static.edpnet.net] has joined #linuxcnc
[20:30:04] -!- Nick001 [[email protected]] has joined #linuxcnc
[20:30:04] -!- toner [[email protected]] has joined #linuxcnc
[20:30:04] -!- bob1123_ [[email protected]] has joined #linuxcnc
[20:30:04] -!- _1SheYode [[email protected]] has joined #linuxcnc
[20:30:04] -!- andypugh [andypugh!~andy2@cpc16-basl9-2-0-cust685.20-1.cable.virginmedia.com] has joined #linuxcnc
[20:30:04] -!- Bojangle1 [[email protected]] has joined #linuxcnc
[20:30:04] -!- Icekiller [[email protected]] has joined #linuxcnc
[20:30:04] -!- vladimirek [[email protected]] has joined #linuxcnc
[20:30:04] -!- LeelooMinai [[email protected]] has joined #linuxcnc
[20:30:04] -!- Jymmm [Jymmm!~jymmm@unaffiliated/jymmm] has joined #linuxcnc
[20:30:04] -!- Mjolinor [Mjolinor!~Mjolinor@cpc1-burn3-0-0-cust572.10-1.cable.virginmedia.com] has joined #linuxcnc
[20:30:04] -!- syyl [[email protected]] has joined #linuxcnc
[20:30:04] -!- ravenlock [ravenlock!~ravenlock@enlightenment/developer/ravenlock] has joined #linuxcnc
[20:30:04] -!- ssi [[email protected]] has joined #linuxcnc
[20:30:04] -!- archivist_herron [[email protected]] has joined #linuxcnc
[20:30:04] -!- arekm [arekm!~arekm@pld-linux/arekm] has joined #linuxcnc
[20:30:04] -!- asdfasd [[email protected]] has joined #linuxcnc
[20:30:04] -!- Fox_Muldr [[email protected]] has joined #linuxcnc
[20:30:04] -!- jfrmilner [[email protected]] has joined #linuxcnc
[20:30:04] -!- RagingComputer [[email protected]] has joined #linuxcnc
[20:30:05] -!- fiesh [[email protected]] has joined #linuxcnc
[20:30:05] -!- ughhhhh [[email protected]] has joined #linuxcnc
[20:30:05] -!- gimps [gimps!~noone@unaffiliated/gimps] has joined #linuxcnc
[20:30:05] -!- c-bob| [c-bob|[email protected]] has joined #linuxcnc
[20:30:05] -!- Loetmichel [[email protected]] has joined #linuxcnc
[20:30:05] -!- i_tarzan [[email protected]] has joined #linuxcnc
[20:30:05] -!- joe9 [[email protected]] has joined #linuxcnc
[20:30:05] -!- carper64_lb [[email protected]] has joined #linuxcnc
[20:30:05] -!- KimK [[email protected]] has joined #linuxcnc
[20:30:05] -!- mrsun [mrsun!~mrsun@c-273de253.4551536--62697410.cust.bredbandsbolaget.se] has joined #linuxcnc
[20:30:05] -!- firephoto_ [[email protected]] has joined #linuxcnc
[20:30:05] -!- awallin [[email protected]] has joined #linuxcnc
[20:30:05] -!- L33TG33KG34R [[email protected]] has joined #linuxcnc
[20:30:05] -!- L84Supper [L84Supper!~TheLarch@unaffiliated/l84supper] has joined #linuxcnc
[20:30:05] -!- jst [jst!~quassel@2620:101:8003:200:224:e8ff:fe39:34c2] has joined #linuxcnc
[20:30:05] -!- JT-Shop [[email protected]] has joined #linuxcnc
[20:30:05] -!- jthornton [[email protected]] has joined #linuxcnc
[20:30:05] -!- zlog [[email protected]] has joined #linuxcnc
[20:30:05] -!- Connor [[email protected]] has joined #linuxcnc
[20:30:05] -!- crank [[email protected]] has joined #linuxcnc
[20:30:05] -!- the_wench [[email protected]] has joined #linuxcnc
[20:30:05] -!- jef79m [[email protected]] has joined #linuxcnc
[20:30:06] -!- nots_ [[email protected]] has joined #linuxcnc
[20:30:06] -!- mozmck [mozmck!~moses@client-204.235.45.143.wcfltx.partnershipbroadband.com] has joined #linuxcnc
[20:30:06] -!- pcw_home [[email protected]] has joined #linuxcnc
[20:30:06] -!- l0ggy [[email protected]] has joined #linuxcnc
[20:30:06] -!- gonzo_ [[email protected]] has joined #linuxcnc
[20:30:06] -!- Logxen [[email protected]] has joined #linuxcnc
[20:30:06] -!- alex_joni [alex_joni!~alex_joni@emc/board-of-directors/alexjoni] has joined #linuxcnc
[20:30:06] -!- gene78 [[email protected]] has joined #linuxcnc
[20:30:06] -!- ds3 [[email protected]] has joined #linuxcnc
[20:30:06] -!- zultron [[email protected]] has joined #linuxcnc
[20:30:06] -!- foo303 [foo303!foocraft@unaffiliated/foocraft] has joined #linuxcnc
[20:30:06] -!- cpresser [[email protected]] has joined #linuxcnc
[20:30:06] -!- toxx [[email protected]] has joined #linuxcnc
[20:30:06] -!- Oo_BIGeye [[email protected]] has joined #linuxcnc
[20:30:06] -!- roh [[email protected]] has joined #linuxcnc
[20:30:06] -!- jdh [[email protected]] has joined #linuxcnc
[20:30:06] -!- markvandenborre [markvandenborre!~mark@ubuntu/member/markvandenborre] has joined #linuxcnc
[20:30:06] -!- Gigs- [Gigs-!~Gigs@pdpc/supporter/28for7/gigs] has joined #linuxcnc
[20:30:06] -!- mode/#linuxcnc [+v alex_joni] by calvino.freenode.net
[20:32:28] <ughhhhh> weird, putting the g43h5 before the toolchange worked
[20:32:34] <ughhhhh> can anyone see a reason why my g43h5 cannot be where it is in my program? if not, i'd say that's a glitch
[20:32:34] <JT-Shop> I usually just have Tn M6 G43
[20:32:34] <ughhhhh> http://pastebin.com/TWs47i0L
[20:32:34] <JT-Shop> archivist: linuxcnc can't fix my drive
[20:32:35] <archivist> how did you break it
[20:32:35] <archivist> that phase conversion ?
[20:32:35] <ughhhhh> JT-Shop: ive never needed to do that before. and also, the previous tool and offset worked fine the way i had it
[20:32:35] <JT-Shop> if it would break I could find the burnt smell and fix it
[20:32:37] <JT-Shop> archivist: yep RPC
[20:33:23] doobeh_ is now known as doobeh
[20:33:50] <JT-Shop> I don't know why it works one way or another, I just know how it is supposed to work according to the manual
[20:34:26] <ughhhhh> JT-Shop: well that isnt how the emc2 post is for mastercam
[20:35:44] <JT-Shop> I don't use mastercam
[20:35:45] <ughhhhh> that's fine, i'm just saying i don't think it's incorrect
[20:35:45] <JT-Shop> Tn M6 G43 ?
[20:36:55] <JT-Shop> never mind I didn't read your statement correctly
[20:37:53] <archivist> why do you put h5 as I dont see that on
http://www.linuxcnc.org/docs/2.4/html/gcode_main.html#sub:G43,-G49:-Tool
[20:37:54] <JT-Shop> G43 enables tool length compensation. G43 changes subsequent motions by offsetting the Z and/or X coordinates by the length of the tool. G43 does not cause any motion. The next time a compensated axis is moved, that axis�s endpoint is the compensated location.
[20:38:19] <JT-Shop> H is optional and not needed if your using the currently loaded tool
[20:38:29] <JT-Shop> G43 without an H word uses the currently loaded tool from the last Tn M6.
[20:38:31] <ughhhhh> i have gang tooling on my lathe. i use multiple tool offsets with the same tool number. I do not put in a t n m6 every time i change tool offsets, going back to the toolchange position for that is a waste of time
[20:39:33] <ughhhhh> the way i have done it worked fine for years. All i'm saying is having the g43h5 on a different line isnt the issue. there is another problem. it could still be with my program, it could be a glitch.
[20:39:40] <JT-Shop> right G43Hn should just work
[20:39:42] <cradek> it's extremely hard to look at your program and description and understand what (if anything) is wrong
[20:39:55] -!- thesisb has quit [Ping timeout: 246 seconds]
[20:40:06] <ughhhhh> cradek: it is ignoring the g43h5 in my program for some reason
[20:40:18] <cradek> if you can narrow it down to the simplest possible gcode that you think behaves incorrectly, you could share that along with your tool table, along with your description of what you think should happen vs what you see happen
[20:40:40] <cradek> then any of us can use that to see it for ourselves
[20:40:43] <ughhhhh> however, if i move the g43h5 before the comment just before the toolchange to t5, it works fine
[20:41:27] <ughhhhh> or if i enter g43h5 in mdi before i start the program at the first line for that tool
[20:43:00] <ughhhhh> so to make it more clear, if i move the g43h5 from line 88 to just after line 82, it works fine. however if it is anywhere after line 85, it does not
[20:43:53] -!- tmcw has quit [Remote host closed the connection]
[20:50:09] -!- _BJfreeman [[email protected]] has joined #linuxcnc
[20:51:30] _BJfreeman is now known as BJfreeman
[20:51:53] <ughhhhh> i take that back, it isnt working there either
[20:53:28] <archivist> have you just got some offsets wrong, is it only that line having problems as I see many other similar lines in the code
[20:53:40] -!- servos4ever has quit [Quit: ChatZilla 0.9.85 [SeaMonkey 2.0.11/20101206162726]]
[20:54:11] -!- FinboySlick has quit [Quit: Leaving.]
[20:54:25] <ughhhhh> if i had the offsets wrong, why would it work fine if i enver the g43h5 in mdi?
[20:54:58] -!- KGB-linuxcnc has quit [Quit: KGB-linuxcnc]
[20:55:35] <andypugh> This is rather lovely:
http://www.ebay.co.uk/itm/Rivett-608-for-parts-or-restoration-/321137853023
[20:56:22] <andypugh> Local to me, too.
[20:56:27] <cradek> ughhhhh: my suggestion about how to narrow down and possibly report the problem is the methodical way to answer all these questions
[20:57:11] <jdh> andypugh: what is that offset looking collet thing for?
[20:57:43] <andypugh> It's an adjustable-height toolholder of some sort.
[20:59:02] aude_ is now known as aude
[20:59:03] <andypugh> http://www.lathes.co.uk/rivett/page2.html
[20:59:48] <andypugh> Rivetts really were very pretty machines.
[21:00:03] -!- rob_h [[email protected]] has joined #linuxcnc
[21:00:37] <andypugh> But, as fas as I can see, pretty much impossible t CNC.
[21:01:08] <andypugh> (though that one, missing parts, would be a good candidate)
[21:01:11] -!- sumpfralle has quit [Ping timeout: 260 seconds]
[21:02:44] -!- rob__H has quit [Ping timeout: 252 seconds]
[21:06:13] <DJ9DJ> gn8
[21:07:07] -!- DJ9DJ has quit [Quit: bye]
[21:10:08] -!- syyl has quit [Quit: Leaving]
[21:11:42] -!- sumpfralle [[email protected]] has joined #linuxcnc
[21:12:31] -!- motioncontrol has quit [Quit: Sto andando via]
[21:15:08] -!- fomox [[email protected]] has joined #linuxcnc
[21:22:03] -!- tmcw has quit [Read error: Connection reset by peer]
[21:24:07] <Mjolinor> you can't refer to a lathe as "pretty", it's just not right
[21:27:50] -!- Komzpa has quit [Ping timeout: 256 seconds]
[21:29:49] <andypugh> Did you look at the lathes.co.uk page?
[21:29:59] <Mjolinor> yup
[21:30:04] <andypugh> Everything that isn't frosted is polished.
[21:32:48] -!- Keknom has quit [Quit: Leaving.]
[21:36:30] <t12_> hah
[21:36:33] <t12_> i didnt know proxxon was toyo
[21:36:35] t12_ is now known as t12
[21:37:57] -!- ingsoc has quit [Quit: Leaving.]
[21:44:10] -!- ravenlock has quit [Ping timeout: 252 seconds]
[21:44:56] -!- Poincare has quit [Quit: changing servers]
[21:45:26] -!- Poincare [Poincare!~jefffnode@2001:470:cb24:4::2] has joined #linuxcnc
[21:49:26] -!- skunkworks [skunkworks!~chatzilla@str-broadband-ccmts-ws-26.dsl.airstreamcomm.net] has joined #linuxcnc
[21:49:53] -!- Mjolinor has quit [Remote host closed the connection]
[21:55:50] -!- odogono has quit [Ping timeout: 252 seconds]
[21:57:29] -!- fomox has quit [Quit: ChatZilla 0.9.90 [Firefox 21.0/20130511120803]]
[22:06:06] -!- micges has quit [Quit: Leaving]
[22:15:42] -!- L33TG33KG34R has quit [Read error: Connection reset by peer]
[22:16:10] -!- L33TG33KG34R [[email protected]] has joined #linuxcnc
[22:16:18] -!- stsydow has quit [Read error: Connection reset by peer]
[22:18:25] -!- hashfail [hashfail!~noone@unaffiliated/gimps] has joined #linuxcnc
[22:18:59] -!- hashfail has quit [Client Quit]
[22:32:17] -!- pfred1 [pfred1!~pfred1@unaffiliated/pfred1] has joined #linuxcnc
[22:32:21] -!- tmcw has quit [Remote host closed the connection]
[22:33:16] -!- generic_nick [[email protected]] has joined #linuxcnc
[22:33:38] -!- stsydow has quit [Client Quit]
[22:35:10] -!- ughhhhh has quit [Read error: Connection reset by peer]
[22:35:45] -!- largecheesepuff has quit [Ping timeout: 248 seconds]
[22:37:38] -!- largecheesepuff [[email protected]] has joined #linuxcnc
[22:53:57] -!- rob_h has quit [Ping timeout: 256 seconds]
[22:55:54] -!- asdfasd has quit [Ping timeout: 264 seconds]
[23:02:07] -!- ravenlock [ravenlock!~ravenlock@enlightenment/developer/ravenlock] has joined #linuxcnc
[23:03:28] -!- arekm has quit [Read error: Operation timed out]
[23:03:54] -!- stsydow has quit [Remote host closed the connection]
[23:04:52] -!- stsydow has quit [Client Quit]
[23:05:34] -!- dgarr [[email protected]] has joined #linuxcnc
[23:09:23] -!- largecheesepuff has quit [Ping timeout: 245 seconds]
[23:11:19] -!- largecheesepuff [[email protected]] has joined #linuxcnc
[23:19:17] -!- zzolo_ has quit [Quit: zzolo_]
[23:37:26] -!- Cylly [[email protected]] has joined #linuxcnc
[23:39:03] -!- mhaberler has quit [Quit: mhaberler]
[23:39:06] -!- Loetmichel has quit [Ping timeout: 264 seconds]
[23:40:19] -!- gonzo_ has quit [Read error: Connection reset by peer]
[23:40:27] -!- arconquit has quit [Quit: Page closed]
[23:40:39] -!- gonzo_ [[email protected]] has joined #linuxcnc
[23:41:48] -!- Icekiller has quit [Read error: Operation timed out]
[23:42:05] -!- Icekiller [[email protected]] has joined #linuxcnc
[23:42:21] -!- joe9_ [[email protected]] has joined #linuxcnc
[23:42:49] -!- pcw_home has quit [Ping timeout: 256 seconds]
[23:43:00] -!- joe9 has quit [Read error: Connection reset by peer]
[23:43:29] -!- pcw_home [[email protected]] has joined #linuxcnc
[23:43:57] -!- Laremere has quit [Ping timeout: 256 seconds]
[23:53:53] -!- andypugh has quit [Quit: andypugh]
